Manyèl Itilizatè Bwat PC ATX Aerocool DELTABKV1 la

Entwodiksyon

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Aerocool DELTABKV1 ATX PC Case. Please read this manual thoroughly before beginning assembly to ensure proper setup and safe use of the product.

Imaj: Angle view of the Aerocool DELTABKV1 PC case, highlighting its RGB front panel design and the transparent tempered glass side panel.

1. Enstalasyon ak Enstalasyon

Follow these steps for installing components into your Aerocool DELTABKV1 PC case.

1.1 Prepare Ka a

1. Carefully unpack the PC case and remove all packaging materials.
2. Mete bwat la sou yon sifas ki plat e ki estab.
3. Remove the tempered glass side panel by unscrewing the thumb screws located at the rear of the panel. Gently slide the panel off and set it aside on a soft, non-abrasive surface to prevent scratches.
4. Remove the right-side metal panel by unscrewing its thumb screws to access the cable management area.

Imaj: Entèn view of the PC case, illustrating the main compartment for motherboard and expansion cards, along with drive mounting points.

1.2 Enstalasyon mèr

1. Identify the correct standoff locations for your ATX, Micro-ATX, or Mini-ITX motherboard. The case may have pre-installed standoffs or marked positions.
2. Install any necessary additional standoffs.
3. Install the I/O shield into the rear opening of the case.
4. Mete kat manman an ak anpil atansyon sou distans yo, aliyen twou vis yo.
5. Sere kat manman an byen sere ak vis yo bay yo. Pa sere l twòp.

1.3 Enstalasyon Disk Depo

Bwat la sipòte 2 x HDD 3.5" ak 2 x SSD 2.5".

• Disk Difisil 3.5 pous: Locate the drive cage in the lower compartment. Slide the 3.5" drives into the bays and secure them with screws.
• SSD 2.5 pous: Mount the 2.5" drives onto the designated mounting points behind the motherboard tray or in the drive cage, securing them with screws.

Imaj: View of the rear interior, illustrating the space for cable routing and mounting locations for 2.5-inch storage drives.

1.4 Enstalasyon Power Supply Unit (PSU).

1. Mete PSU a nan konpatiman espesyal ki anba dèyè bwat la.
2. Ensure the PSU fan faces downwards (if there's a filtered vent at the bottom) or upwards, depending on your cooling preference and PSU design.
3. Secure the PSU to the case with screws from the rear.

1.5 Expansion Card (GPU) Installation

1. Remove the necessary PCI slot covers from the rear of the case.
2. Insert your graphics card or other expansion cards into the appropriate PCIe slots on the motherboard.
3. Secure the expansion card(s) with screws. The case supports graphics cards up to 307mm in length.

Image: Rear exterior of the case, displaying the PCI expansion slots, the cutout for the power supply, and the pre-installed 12cm rear fan.

1.6 Fan and Cooling Installation

The case includes one 12cm rear fan. Additional fan configurations are supported:

• Devan: 3 x 12cm fans (optional)
• Top: 2 x 12cm fans (optional)
• Dèyè: 1 x 12cm fan (pre-installed)
• Kouvèti PSU: 2 x 12cm fans (optional)

For liquid cooling, a 12cm radiator can be installed at the rear.

1.7 Koneksyon Front Panel

Connect the front panel cables (USB, HD Audio, Power, Reset, LED) to the corresponding headers on your motherboard. Refer to your motherboard manual for specific header locations.

Image: Top-front perspective of the case, highlighting the accessible front I/O panel which includes USB ports, audio jacks, and control buttons.

1.8 Jesyon kab

Utilize the space behind the motherboard tray and the cable tie-down points to route and secure cables. This improves airflow and aesthetics.

1.9 Final Asanble

1. Once all components are installed and cables are managed, reattach the right-side metal panel.
2. Carefully reattach the tempered glass side panel and secure it with the thumb screws.

2. Fonksyonman Karakteristik Ka a

2.1 Kontwòl ekleraj RGB

The Aerocool DELTABKV1 features an RGB front panel with integrated lighting modes. Use the dedicated LED control button on the top panel to cycle through various lighting effects and colors. Press and hold the LED button for a few seconds to turn the RGB lighting on or off.

Imaj: Devan dirèk view of the PC case, emphasizing the distinctive RGB lighting design on the front panel.

2.2 Pò Panèl Devan an

The top panel provides convenient access to:

• Pò USB 2.0 (x2)
• HD Audio Jacks (Headphone and Microphone)
• Bouton pouvwa
• Bouton Reyajiste
• Dirije bouton kontwòl

Ensure these are correctly connected to your motherboard for full functionality.

3. Antretyen

Antretyen regilye ede asire pèfòmans optimal ak lonjevite bwat PC ou a.

• Filtè Pousyè: Periodically check and clean any removable dust filters (e.g., under the PSU, front intake). Use compressed air or a soft brush to remove accumulated dust.
• Netwayaj eksteryè: Siye sifas eksteryè yo ak yon mou, damp cloth. Avoid abrasive cleaners or solvents. For the tempered glass panel, use a glass cleaner and a microfiber cloth.
• Pousyè Entèn: Every few months, open the case and use compressed air to gently remove dust from internal components and fan blades. Ensure the system is powered off and unplugged before cleaning.

NAN. Depanaj

Seksyon sa a adrese pwoblèm komen ou ka rankontre.

• Pa gen pouvwa:
  • Asire w ke PSU a limen epi li byen konekte nan priz miray la.
  • Verify that the power button cable from the case is correctly connected to the motherboard's front panel header.
  • Check all internal power connections (24-pin ATX, 8-pin CPU, GPU power).
• Vantilatè yo pa vire:
  • Konfime ke câbles fanatik yo byen konekte ak konektè fanatik kat manman an oswa yon kontwolè fanatik.
  • Tcheke paramèt BIOS/UEFI yo pou kontwòl vitès fanatik la.
• Ekleraj RGB pa travay:
  • Ensure the RGB cable from the front panel is connected to the appropriate RGB header on your motherboard or a dedicated RGB controller.
  • Press the LED control button on the top panel to cycle through modes.
  • Check for any software control if connected to a motherboard RGB header.
• Front Panel USB/Audio Not Working:
  • Verify that the USB and HD Audio cables from the case are correctly connected to the corresponding headers on your motherboard.

If issues persist, consult your motherboard manual or the component manufacturer's support resources.

5. Espesifikasyon

6. Garanti ak sipò

The Aerocool DELTABKV1 PC Case is covered by the manufacturer's standard warranty. For specific warranty terms, duration, and support inquiries, please refer to the official AeroCool websit la oubyen kontakte sèvis kliyan yo dirèkteman. Kenbe prèv acha ou pou reklamasyon garanti.

Pou plis asistans, vizite AeroCool official websit.