Manyèl Itilizatè Oratè Bluetooth Pòtab KREAFUNK aGO II Tissu

1. Entwodiksyon

Thank you for choosing the KREAFUNK aGO II Tissu Portable Bluetooth Speaker. This manual provides essential information for the proper setup, operation, and maintenance of your device. Please read it carefully before use and retain it for future reference.

2. Pake kontni

Asire w tout atik yo prezan nan pakè a:

• KREAFUNK aGO II Tissu Portable Bluetooth Speaker
• USB pou USB-C Chargement kab
• Manyèl Itilizatè (dokiman sa a)

3. Pwodwi souview

The KREAFUNK aGO II Tissu is a compact and waterproof portable Bluetooth speaker designed for high-quality audio on the go. It features a durable construction with upcycled fabric and leather elements.

Figi 3.1: Devan view of the KREAFUNK aGO II Tissu speaker, showcasing its soft yellow casing, grey fabric grille, and brown leather strap.

Kontwòl ak pò

Figi 3.2: Side view of the speaker, illustrating the power button, volume controls, and the USB-C charging port.

• Bouton pouvwa: Peze epi kenbe pou limen/ete.
• Bouton Volim Monte/Pwochen Mizik: Peze yon ti kras pou ogmante volim, peze lontan pou pwochen mizik la.
• Bouton Diminye Volim/Mizik Presedan: Peze yon ti kras pou bese volim nan, peze lontan pou ale nan mizik anvan an.
• USB-C chaje pò: Pou konekte kab chaje a.

4. Enstalasyon

4.1. Chaje Oratè a

Before first use, fully charge your aGO II Tissu speaker.

1. Connect the small end of the included USB-C charging cable to the USB-C port on the speaker.
2. Konekte bout USB estanda kab la nan yon adaptè kouran USB (pa enkli) oubyen nan yon pò USB òdinatè.
3. The LED indicator will show charging status (e.g., red for charging, off or green for fully charged, refer to product specific LED behavior if available).
4. Yon fwa konplètman chaje, dekonekte kab la.

4.2. Powering On / Off

• Pou limen: Press and hold the Power Button for approximately 3 seconds until you hear an audible cue or see the LED indicator light up.
• Pou etenn: Press and hold the Power Button for approximately 3 seconds until you hear an audible cue or the LED indicator turns off.

5. Operasyon Enstriksyon

5.1. Pè Bluetooth

To connect your aGO II Tissu speaker to a Bluetooth-enabled device (smartphone, tablet, laptop):

1. Ensure the speaker is powered on and in pairing mode (the LED indicator will typically flash blue rapidly). If not, you may need to press and hold the Bluetooth button (often combined with the power button or a dedicated button) to initiate pairing mode.
2. Sou aparèy ou an, ale nan paramèt Bluetooth yo.
3. Chèche pou available devices. You should see "KREAFUNK aGO II Tissu" or a similar name in the list.
4. Select the speaker to pair. Once paired, the LED indicator will usually turn solid blue, and you will hear a confirmation sound.
5. Oratè a ap otomatikman eseye rekonekte ak dènye aparèy ki konekte a lè li limen.

5.2. Audio Playback and Controls

• Jwe/Poz: Short press the Power Button (or a dedicated Play/Pause button if available).
• Ajisteman Volim: Peze bouton pou monte volim nan (+) oswa bouton pou desann volim nan (-) yon ti tan.
• Pwochen Track: Peze bouton pou monte volim nan (+) pandan yon bon bout tan.
• Track Previous: Peze bouton Diminye Volim nan (-) pandan yon bon bout tan.
• Kontwòl vwa: The speaker supports voice control functionality, likely by passing through commands to your connected smartphone's voice assistant. Press the Power Button (or a dedicated button) to activate your device's voice assistant.

5.3. Karakteristik ki enpèmeyab

The aGO II Tissu speaker is waterproof. This means it can withstand splashes and light rain. However, it is not designed for submersion in water. Ensure the USB-C charging port cover is securely closed before exposing the speaker to moisture.

6. Antretyen

6.1. Netwayaj

To clean your speaker, use a soft, dry, or slightly damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the speaker's finish and fabric grille.

6.2. Depo

Sere oratè a nan yon kote ki fre epi sèk, lwen limyè solèy dirèk ak tanperati ekstrèm. Si w ap sere l pou yon peryòd tan pwolonje, chaje batri a detanzantan pou kenbe l an bon eta.

NAN. Depanaj

If you encounter issues with your aGO II Tissu speaker, refer to the following common problems and solutions:

8. Espesifikasyon

• Mak: KREAFUNK
• Non modèl: aGO II Tissu
• Nimewo Modèl: KFWT146
• Koulè: Soft Yellow
• Koneksyon Teknoloji: Bluetooth, USB
• Teknoloji kominikasyon san fil: Bluetooth
• Gwosè Oratè: 53 mm
• Maksimòm pouvwa Sòti Oratè: 6 Watts
• Metòd kontwòl: Vwa (via aparèy konekte)
• Sous pouvwa: Electric Cable (for charging internal battery)
• Enpèmeyab: Wi
• Materyèl: Plastic, silicone, upcycled leather, upcycled fabric grille, metal
• Itilizasyon Rekòmande: Pou smartphone oswa tablèt
• Aparèy konpatib: Laptop, Smartphone, Tablèt
• Eleman ki enkli: USB pou USB-C chaje kab

9. Enfòmasyon sou Sekirite

• Pa ekspoze oratè a nan tanperati ekstrèm, limyè solèy dirèk, oswa flanm dife.
• Pa eseye demonte, repare, oswa modifye oratè a. Sa ap anile garanti a epi li ka lakòz domaj oswa blesi.
• Kenbe oratè a lwen chan mayetik fò.
• Evite jete oswa soumèt oratè a nan gwo enpak.
• Ensure the charging port cover is sealed when near water to maintain waterproof integrity.
• Jete oratè a ak pil li yon fason responsab dapre règleman lokal yo.

10. Garanti ak sipò

KREAFUNK products are designed and manufactured to the highest quality standards. For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official KREAFUNK website. Please have your model number (KFWT146) and proof of purchase ready when contacting support.