EPOMAKER Mini Cat 64 60% Wired Keyboard Kit Instruction Manual

1. Enstalasyon

1.1 Debalè ak Konpozan

Your EPOMAKER Mini Cat 64 kit includes the following components:

• Mini Cat 64 Kit (including PCB, Mounting Plate, Stabilizers)
• Kalite-C Kab

1.2 Enstriksyon Asanble

The Mini Cat 64 is a DIY keyboard kit. Follow these steps to assemble your keyboard:

1. Prepare Switches: Ensure your chosen 3-pin or 5-pin mechanical switches are ready for installation. The hot-swappable sockets allow for easy installation without soldering.
2. Enstale switch: Align the pins of each switch with the corresponding holes on the PCB (Printed Circuit Board). Gently press down until the switch clicks into place. Ensure all switches are seated correctly.

Image: Installation of a 3-pin hot-swappable switch into the keyboard PCB.

3. Install Keycaps: Once all switches are installed, firmly press your desired keycaps onto the stems of the switches.
4. Assemble Case: The kit features a stacked acrylic case. Carefully align and secure the acrylic layers around the PCB and mounting plate using the provided screws.

Image: Fully assembled EPOMAKER Mini Cat 64 keyboard kit showcasing the stacked acrylic case and RGB backlighting.

1.3 Konekte klavye a

Connect the keyboard to your computer using the provided Type-C cable. The keyboard is compatible with both Windows and Mac operating systems.

2. Operasyon Enstriksyon

2.1 Fonksyon debaz klavye a

The Mini Cat 64 features a 60% layout, retaining essential keys while offering a compact form factor. All standard typing functions operate as expected.

2.2 RGB ekleraj

The keyboard is equipped with vibrant RGB backlighting. The stacked acrylic case enhances the lighting effects, allowing light to shine through the sockets and from the sides of the keyboard. Specific key combinations (refer to the included quick start guide) can be used to cycle through various lighting modes, colors, and brightness levels.

2.3 Pwogramasyon VIA

The Mini Cat 64 kit is fully programmable via VIA software. This allows you to remap keys, create macros, and customize lighting effects without reflashing the firmware. Changes are saved directly on the keyboard's onboard memory.

1. Download VIA: Obtain the latest VIA software from the official VIA websit.
2. Konekte klavye a: Ensure your Mini Cat 64 is connected to your computer via the Type-C cable.
3. Load Layout: Open VIA and load the appropriate keymap for the Mini Cat 64.
4. Customize: Use the intuitive interface to remap keys, set up layers, and configure lighting to your preference.

Image: VIA software interface for customizing key assignments and layers.

3. Antretyen

3.1 Netwaye klavye a

Pou kenbe yon pèfòmans ak yon aparans optimal, netwaye klavye ou regilyèman:

• Retire pousyè: Use a soft brush or compressed air to remove dust and debris from between keycaps.
• Netwayaj sifas: Wipe the keycaps and case with a slightly damp, twal ki pa gen pousyè. Evite pwodui chimik ki agresif.

3.2 Ranplasman switch ak kle

Thanks to the hot-swappable design, switches and keycaps can be easily replaced:

• Retire kouvèti kle a: Use a keycap puller to gently remove keycaps. Pull straight up to avoid damaging the switch stem.
• Retire Chanjman: Use a switch puller to carefully extract switches from the PCB. Squeeze the clips on the top and bottom of the switch and pull upwards.
• Enstalasyon: Follow the assembly steps (Section 1.2) to install new switches and keycaps.

NAN. Depanaj

If you encounter issues with your Mini Cat 64 keyboard, please refer to the following common solutions:

• Klavye a pa reponn:
  • Ensure the Type-C cable is securely connected to both the keyboard and your computer.
  • Eseye konekte klavye a nan yon lòt pò USB sou òdinatè w la.
  • Teste klavye a sou yon lòt òdinatè pou elimine pwoblèm espesifik nan sistèm nan.
• Kle yo pa anrejistre:
  • Carefully remove the keycap and switch for the affected key. Reinstall the switch, ensuring its pins are straight and fully seated in the hot-swappable socket.
  • If the issue persists, try replacing the switch with a known working one.
• RGB Backlighting Issues:
  • Check the keyboard's lighting controls (refer to the quick start guide) to ensure RGB is enabled and brightness is adjusted.
  • If using VIA, verify that your lighting profiles are correctly configured and applied.
• VIA Software Not Detecting Keyboard:
  • Ensure VIA software is up-to-date.
  • Confirm the keyboard is connected via Type-C cable.
  • Restart your computer and the VIA software.

For further assistance, please visit the EPOMAKER support websit oswa kontakte sèvis kliyan.

5. Espesifikasyon

6. Garanti ak sipò

6.1 Pwodwi Garanti

EPOMAKER products are covered by a limited warranty against manufacturing defects. Please retain your proof of purchase for warranty claims. The specific duration and terms of the warranty may vary by region and product. For detailed warranty information, please visit the official EPOMAKER websit.

6.2 Sipò pou Kliyan

For technical support, product inquiries, or warranty service, please contact EPOMAKER customer support through the following channels:

• Websit: Vizite la EPOMAKER Official Store for FAQs, drivers, and contact forms.
• Imèl: Gade anbalaj pwodwi ou a oswa enfòmasyon ofisyèl la. website for the most current customer service email address.

When contacting support, please provide your product model (Mini Cat 64) and a detailed description of the issue.