EverBrite Rechargeable LED Headlamp with Motion Sensor - User Manual

1. Pwodwi souview

The EverBrite Rechargeable LED Headlamp is a versatile lighting device designed for various activities such as hiking, running, camping, and general tasks. It features multiple lighting modes, a motion sensor for hands-free operation, and a rechargeable battery.

Image 1.1: The EverBrite headlamp, illustrating its main features including the light, headband, USB charging cable, and motion sensor functionality.

2. Pake kontni

• 1 x EverBrite Rechargeable LED Headlamp
• 1 x Micro-USB Chargement Kab
• 1 x Lithium Ion Battery (pre-installed)

3. Karakteristik kle

• Batri rechargeable: Equipped with a 1200mAh lithium battery and Micro-USB charging.
• 9 mòd ekleraj: Includes XPE, COB, XPE+COB, Red Beam, and SOS Red Strobe in key light mode, plus XPE, COB, XPE+COB, and Red Beam in motion sensor mode.
• Capteur Mouvman: Allows hands-free operation to turn the light on/off with a wave of the hand.
• Lejè ak dirab: Constructed from ABS hard rubber, weighing approximately 0.17 lbs (80g).
• Bando reglabl: Elastic headband fits head circumferences from 15.7" (40cm) to 31.5" (80cm).
• Ang reglabl: Headlamp can be tilted up to 45 degrees.
• Tanperati rezistan: Operates effectively in temperatures from -4℉ (-20℃) to 140℉ (60℃).

4. Enstalasyon

4.1 Charging the Headlamp

1. Jwenn pò chaje Micro-USB a sou tèt la.amp.
2. Connect the provided Micro-USB cable to the headlamp and the other end to a 5V 1A USB charger (not included), power bank, or computer USB socket.
3. The power indicator lights will show the charging status. One light flashing indicates charging, and four solid lights indicate a full charge.
4. Deploge headl laamp promptly after charging is complete to preserve battery life.

Enpòtan: Do not turn on the light while the headlamp ap chaje.

Image 4.1: Illustration of the headlamp's Micro-USB charging port and battery indicator lights, demonstrating connection to a power source.

4.2 Ajiste bann tèt la

1. Mete tèt laamp sou tèt ou.
2. Adjust the elastic headband to a comfortable fit. The band is designed to adapt to various head sizes (15.7"-31.5" / 40-80cm).
3. Asire headl laamp is secure but not too tight to avoid discomfort during prolonged use.

Image 4.2: The adjustable and breathable headband of the EverBrite headlamp, shown being worn by individuals.

5. Operasyon Enstriksyon

5.1 Power On/Off and Mode Selection (Key Light Mode)

1. Press the power button once to turn on the headlamp.
2. Within 5 seconds of turning on, press the power button repeatedly to cycle through the following modes: XPE Mode (300 Lm) > COB Mode (300 Lm) > XPE+COB Mode (500 Lm) > Wouj gwo bout bwa > SOS Red Strobe.
3. If the light has been on for more than 5 seconds in any mode, a single press of the power button will turn the light off directly, without cycling through all modes.

Image 5.1: Visual representation of the headlamp's various lighting modes and their respective lumen outputs.

5.2 Motion Sensor Mode

1. To activate motion sensor mode, press the dedicated motion sensor button (usually indicated by a wave icon or distinct from the main power button). A red indicator light will illuminate.
2. Once activated, wave your hand within approximately 15 cm (6 inches) of the sensor to turn the light ON or OFF.
3. In motion sensor mode, you can cycle through XPE, COB, XPE+COB, ak Wouj gwo bout bwa by pressing the main power button.
4. To exit motion sensor mode, press the motion sensor button again.

Image 5.2: Demonstration of the motion sensor feature, showing how to activate it and use hand gestures to control the light.

5.3 Ajisteman Ang

Headl laamp unit can be tilted up to 45 degrees to direct the light precisely where needed. Gently push or pull the light housing to adjust its angle.

Image 5.3: The headlamp's adjustable angle mechanism, allowing users to direct the light beam.

6. Antretyen

6.1 Netwayaj

• Siye tèt laamp body with a soft, damp twal. Pa sèvi ak pwodui netwayaj abrazif oswa solvang.
• The headband is removable for easy washing. Hand wash with mild soap and water, then air dry completely before reattaching.

6.2 Depo

• Sere tèt laamp nan yon kote ki fre, sèk lwen limyè solèy la dirèk.
• For long-term storage, ensure the battery is partially charged (around 50%) and recharge it every 3-6 months to maintain battery health.

NAN. Depanaj

• Headlamp pa limen:
  - Ensure the battery is charged. Connect to a power source and check the charging indicator lights.
  - Verify the power button is pressed correctly.
• Kout lavi batri:
  - Ensure the headlamp is fully charged before use. Charging time is typically 2-3 hours.
  - Battery performance can decrease over time with repeated charge cycles.
• Limyè tranble:
  - This could indicate a low battery. Recharge the headlamp.
  - If flickering persists after charging, contact customer support.
• Motion sensor not responding:
  - Ensure motion sensor mode is activated (red indicator light is on).
  - Wave your hand within the optimal sensing distance (approx. 15 cm).
  - Clean the sensor area to remove any obstructions.

8. Espesifikasyon

9. Garanti ak sipò

9.1 Enfòmasyon sou Garanti

This EverBrite headlamp vini ak yon 2-ane garanti apati dat acha a. Garanti sa a kouvri domaj fabrikasyon ak atizan konn fè nan itilizasyon nòmal. Li pa kouvri domaj ki koze pa move itilizasyon, aksidan, modifikasyon san otorizasyon, oswa mete ak chire nòmal.

9.2 Sipò pou Kliyan

For technical assistance, warranty claims, or any questions regarding your EverBrite headlamp, please contact our customer support team:

• Imèl: support@everbrite.com (Example)
• Telefòn: 1-800-XXX-XXXX (Egzanpample)
• Websit: Visit the EverBrite Store on Amazon

Please have your model number (E021047AU) and proof of purchase ready when contacting support.