Entwodiksyon
This user manual provides essential information for the installation, operation, and maintenance of your AKRAPOVIC L-H10R12/TD Optional Link Pipe. Please read this manual thoroughly before proceeding with installation to ensure proper function and safety. This product is designed as an optional link pipe for slip-on mufflers, specifically for the HONDA CBR1000RR-R FIREBLADE and FIREBLADE SP models from 2020 to 2022.
Important Safety Notice: AKRAPOVIC scarves are exclusive for racing except JMCA certified products. Driving on public roads is prohibited by law with non-JMCA certified products.
Pwodwi souview
The AKRAPOVIC L-H10R12/TD is an optional stainless steel link pipe designed to complement compatible AKRAPOVIC slip-on mufflers (S-H10R9, S-H10E3) for full EX noise cancelling. It is engineered for precise fitment and optimal performance on specified Honda CBR1000RR-R models.
Image: The AKRAPOVIC L-H10R12/TD Optional Link Pipe, made from stainless steel, featuring its integrated resonator and connection points for the engine headers and the slip-on muffler.
Karakteristik kle:
- Nimewo Modèl: L-H10R12/TD
- Materyèl: High-grade Stainless Steel
- Compatible Silencer Model Numbers: S-H10R9, S-H10E3
- Aplikasyon: Optional pipe for slip-on mufflers, designed for full EX noise cancelling.
Konpatibilite
This optional link pipe is compatible with the following motorcycle models:
- HONDA CBR1000RR-R FIREBLADE (Model Years: 2020 - 2022)
- HONDA CBR1000RR-R FIREBLADE SP (Model Years: 2020 - 2022)
Ensure your motorcycle model and year fall within this range for proper fitment and performance.
Enstalasyon ak Enstalasyon
Professional installation is highly recommended. Always refer to the motorcycle's service manual for specific torque specifications and safety procedures. Ensure the engine is cool before beginning installation.
Zouti obligatwa (pa enkli):
- Socket Wrench Set
- Kle koupl
- Spring Puller Tool (if applicable)
- Gan ki reziste chalè
- Netwaye twal
Etap enstalasyon:
- Preparasyon: Park the motorcycle on a stable, level surface. Allow the exhaust system to cool completely.
- Retire eleman ki egziste yo: Carefully remove the stock exhaust components that will be replaced by the Akrapovic link pipe. This typically involves disconnecting springs, clamps, and mounting bolts. Refer to your motorcycle's service manual for detailed removal instructions.
- Install Link Pipe: Position the Akrapovic L-H10R12/TD link pipe. Ensure all connection points align correctly with the engine headers and the compatible slip-on muffler (S-H10R9 or S-H10E3).
- Koneksyon an sekirite: Attach the link pipe using the provided springs and clamps. Do not overtighten. Ensure a snug fit to prevent exhaust leaks.
- Montaj: Secure the link pipe to the motorcycle frame using the appropriate mounting brackets and bolts. Apply thread locker if specified by the motorcycle or exhaust manufacturer.
- Tcheke final la: Double-check all connections, bolts, and springs to ensure they are properly secured. Wipe down the exhaust system to remove any fingerprints or grease, which can burn onto the surface when heated.
- Premye kòmansman: Start the engine and check for any exhaust leaks. A slight smell of burning oil or grease is normal during the first few minutes of operation as manufacturing residues burn off.
Konsiderasyon fonksyònman
Once installed, the Akrapovic L-H10R12/TD optional link pipe will modify the exhaust characteristics of your motorcycle. While this product is designed for noise cancelling, it is primarily intended for racing applications. Be aware of local noise regulations and ensure compliance if operating on public roads.
Peryòd enskripsyon:
No specific break-in period is required for the link pipe itself, but it is advisable to monitor the exhaust system for the first few rides to ensure all components remain secure and no leaks develop.
Antretyen
Regular maintenance will ensure the longevity and performance of your Akrapovic link pipe.
Netwayaj:
- Clean the stainless steel surface with a soft cloth and a mild, non-abrasive cleaner specifically designed for stainless steel.
- Avoid using abrasive pads or harsh chemicals, as these can scratch or damage the finish.
- Always clean the exhaust system when it is cool.
Enspeksyon:
- Periodically inspect all springs, clamps, and mounting bolts for tightness. Vibrations from motorcycle operation can cause fasteners to loosen over time.
- Check for any signs of exhaust leaks, such as black soot around joints.
- Inspect the pipe for any cracks, dents, or damage.
Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Fwit echapman | Lach clamps or springs; Damaged gasket; Improper installation. | Sere tout clamps and springs. Inspect and replace any damaged gaskets. Re-install components ensuring proper alignment. |
| Twòp Vibration | Loose mounting bolts; Improperly seated components. | Check and tighten all mounting bolts. Ensure all exhaust components are properly seated and aligned. |
| Discoloration of Pipe | Normal heat cycling; Contaminants on surface during first use. | Some discoloration is normal for stainless steel exhaust components due to heat. Ensure the pipe was clean before first use to prevent permanent stains. |
If you encounter issues not listed here, or if solutions do not resolve the problem, please contact authorized Akrapovic service centers or your dealer.
Espesifikasyon
- Nimewo modèl pwodwi: L-H10R12/TD
- Materyèl: Nerjaveèi asye
- Pwa: Apeprè 2.15 kg
- Dimansyon pake: 72.7 x 27.3 x 16.7 cm
- Compatible Silencers: S-H10R9, S-H10E3
- Manifakti: AKRAPOVIC
- Mak: ACTIVE (Distributor/Brand in Japan)
Garanti ak sipò
For warranty information and technical support, please refer to the official Akrapovic website or contact your authorized dealer. Keep your proof of purchase for any warranty claims.
Manifakti: Akrapovic
Distributor (Japan): AKTIF
