1. Entwodiksyon
Thank you for choosing the MaxLite 4.5W LED MR16 GU10 Dimmable Flood Light Bulb. This energy-efficient LED bulb is designed to provide high-quality, warm white illumination while significantly reducing energy consumption. This manual provides important information regarding the safe installation, operation, and maintenance of your new LED bulb. Please read it thoroughly before use and retain it for future reference.
2. Pwodwi Features
- Enèji efikas: 4.5W LED replaces a 35W incandescent bulb.
- Klate: Bay yon pwodiksyon limyè 315 lumèn.
- Tanperati koulè: 3000K warm white light.
- Dimmable: Compatible with most standard dimmers (refer to dimmer compatibility list if available from manufacturer).
- Kalite baz: GU10 twist-and-lock base.
- Voltage: Designed for 120V input.
- Long Lifespan: Evalye pou yon lavi mwayèn 25,000 èdtan.
- Kalite gwo bout bwa: Flood light distribution.
Image 1: MaxLite 4.5W LED MR16 GU10 Dimmable Flood Light Bulb. This image shows the white MR16 bulb with a clear lens and two pins for the GU10 base.
3. Enfòmasyon sou Sekirite
Tanpri obsève prekosyon sekirite sa yo pou evite blesi oswa domaj:
- Pouvwa Off: Always turn off the power to the fixture and allow the bulb to cool before installing, removing, or cleaning.
- Itilize andedan kay la sèlman: This bulb is intended for indoor use in dry locations. Do not expose to water or moisture.
- Konpatibilite aparèy: Ensure the fixture is rated for 120V and has a GU10 base. Do not exceed the maximum wattagevalyasyon aparèy la.
- Dimmers: Sèvi ak li sèlman avèk gradatè konpatib. Gradatè ki pa konpatib ka lakòz flache oswa domaje anpoul la.
- Pa demonte: There are no user-serviceable parts inside. Disassembling the bulb will void the warranty and may cause electric shock.
- Sifas cho: The bulb may become hot during operation. Avoid touching it until it has cooled down.
- Dispozisyon: Dispose of LED bulbs according to local regulations.
4. Enstalasyon ak Enstalasyon
- Etenn pouvwa: Before beginning installation, ensure the power supply to the light fixture is completely turned off at the circuit breaker or fuse box.
- Verify Fixture: Confirm that your light fixture is designed for GU10 base bulbs and operates on 120V.
- Retire ansyen anpoul la (si sa aplikab): If replacing an existing bulb, allow it to cool completely. Gently push the old GU10 bulb into the socket and twist counter-clockwise to unlock and remove it.
- Enstale nouvo anpoul: Align the two pins of the MaxLite LED MR16 bulb with the two holes in the GU10 socket. Gently push the bulb into the socket and twist clockwise until it locks securely into place. Do not force the bulb.
- Retabli pouvwa: Once the bulb is securely installed, restore power to the fixture at the circuit breaker or fuse box.
- Tès: Limen switch limyè a pou verifye si li fonksyone byen.
5. Operasyon Enstriksyon
Operating your MaxLite LED MR16 GU10 bulb is straightforward:
- On/Off: Sèvi ak switch miray estanda ki konekte ak aparèy ekleraj ou a pou limen oswa etenn anpoul la.
- Dimming: If connected to a compatible dimmer switch, adjust the dimmer control to achieve your desired light level. Ensure the dimmer is designed for LED lighting to prevent performance issues.
6. Antretyen
The MaxLite LED MR16 GU10 bulb requires minimal maintenance:
- Netwayaj: To clean the bulb, first turn off the power and allow it to cool. Wipe the bulb with a soft, dry, non-abrasive cloth. Do not use liquid cleaners or abrasive materials.
- Pa gen pati itilizatè ki ka fè sèvis: This bulb contains no user-serviceable parts. Do not attempt to repair or modify it.
NAN. Depanaj
If you encounter issues with your LED bulb, refer to the following common solutions:
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Anpoul pa limen | Pa gen pouvwa nan aparèy Anpoul pa byen chita Anpoul ki defektye | Check circuit breaker/switch Ensure bulb is twisted and locked securely Ranplase anpoul si sa nesesè |
| Anpoul la tranble oswa li ronfle | Dimmer switch enkonpatib Koneksyon ki lach Voltage fluctuations | Ranplase ak yon gradateur ki konpatib ki ap dirije Ensure bulb is securely seated Konsilte yon elektrisyen si vòltage issues persist |
| Dimming does not work or is inconsistent | Dimmer switch enkonpatib Dimmer not designed for LED loads | Ensure dimmer is specifically rated for LED bulbs and compatible with this model |
8. Espesifikasyon
| Spesifikasyon | Valè |
|---|---|
| Nimewo Modèl | 4.5MR16GUD30FL |
| Wattage | 4.5W (replaces 35W incandescent) |
| Lumens | 315 lm |
| Antre Voltage | 120V |
| Baz anpoul | GU10 |
| Tanperati Koulè | 3000K (blan cho) |
| Dimmable | Wi |
| Gwosè fòm anpoul | MR16 |
| Mwayèn lavi | 25,000 èdtan |
| Itilizasyon Andedan kay la / Deyò | Andedan kay la |
| Materyèl | Glass |
| Endèks rann koulè (CRI) | 100 |
9. Garanti ak sipò
Garanti: The provided product information indicates that the warranty description is "N/a." For specific warranty details, please contact MaxLite directly or refer to their official websit.
Sipò Kliyan: For further assistance, technical support, or inquiries regarding your MaxLite product, please visit the official MaxLite websit entènèt la oubyen kontakte depatman sèvis kliyan yo. Anjeneral, ou ka jwenn enfòmasyon pou kontakte yo sou anbalaj pwodwi a oubyen sou fich manifakti a. websit.
You can visit the MaxLite Store for more products and information: MaxLite Store on Amazon
