Pwodwi souview
The AUTOOL CS605 OBD2 Scanner is a professional diagnostic tool designed for automotive technicians and DIY enthusiasts. It offers comprehensive vehicle system diagnosis and a range of special service functions to identify and resolve vehicle issues efficiently.
Image: The AUTOOL CS605 diagnostic scanner, showcasing its user interface with options for Diagnose, Special Function, OBDII, Settings, Update, and About.
Karakteristik kle:
- All System Diagnosis: Capable of diagnosing issues across PCM (Drive System), Chassis System, BCM (Body System), and Electrical System.
- Five Special Service Resets: Includes Oil Reset, Electronic Parking Brake (EPB) Reset, Steering Angle Sensor (SAS) Calibration, Anti-lock Braking System (ABS) Bleeding, and Throttle Learn.
- 10 Modes OBDII Function: Supports full OBDII functions such as Reading Codes, Erasing Codes, Data Stream, I/M Readiness Status, Live Data Stream, Freeze Frame Data, O2 Sensor Test, On-Board Monitor Test, Read Vehicle Information, and Active Test.
- AUTOVIN Function: Provides quick and easy vehicle diagnosis by automatically identifying VIN information.
- Bi-Directional Control / Active Test: Allows the tool to send commands to vehicle systems to perform specific tests, such as activating fuel pumps or A/C clutches.
- Sipò pou plizyè lang: Offers a wide range of language options for global usability.
- Mizajou gratis pou tout lavi: Software updates are available free of charge via Wi-Fi or USB connection.
Enstalasyon ak premye itilizasyon
Before using your AUTOOL CS605 scanner, ensure your vehicle's ignition is in the ON position (engine off or running, depending on the test). The device is designed for plug-and-play operation.
- Jwenn pò OBDII a: The OBDII port is typically located under the dashboard on the driver's side, though its exact position may vary by vehicle model.
- Konekte eskanè a: Plug the diagnostic cable from the AUTOOL CS605 into the vehicle's OBDII port. Ensure a secure connection.
- Pouvwa sou: The scanner will automatically power on once connected to the vehicle's OBDII port.
- Premye konfigirasyon: Upon first use, you may be prompted to select your preferred language and time zone. Follow the on-screen instructions.
- AUTOVIN Function: The device features an AUTOVIN function that can automatically identify your vehicle's VIN for quick diagnosis. Allow the scanner to perform this function or manually enter VIN if prompted.
Enstriksyon Operasyon
1. All System Diagnosis
This function allows you to scan and diagnose all available electronic control systems in the vehicle, including the Powertrain Control Module (PCM), Chassis System, Body Control Module (BCM), and Electrical System. This comprehensive scan helps identify fault codes and live data from various vehicle components.
Image: Visual representation of the four main diagnostic systems covered by the AUTOOL CS605: PCM (Drive System), Chassis System, BCM (Body System), and Electrical System.
- Nan meni prensipal la, chwazi "Dyagnostik".
- Choose "Auto Scan" or select a specific system for diagnosis.
- The scanner will communicate with the vehicle's ECUs and display any detected Diagnostic Trouble Codes (DTCs) and live data.
2. 5 Special Service Resets
The CS605 provides access to five commonly used maintenance and reset functions:
Image: Icons illustrating the five special service resets available: Oil Reset, SAS Calibration, EPB Reset, ABS Bleeding, and Throttle Learn.
- Reset lwil oliv: Reyajiste sistèm lavi lwil motè a apre yon chanjman lwil.
- Reyajisteman EPB: Reyajiste sistèm fren pakin elektwonik la apre ranplasman plaket fren an.
- Kalibrasyon SAS: Calibrates the steering angle sensor after steering system repairs or alignment.
- Senyen nan ABS: Fè pwosedi pou senyen sistèm frenaj antiblokaj la.
- Throttle Learn: Reaprann pozisyon kò papyon an apre netwayaj oswa ranplasman.
- To access these functions, select "Special Function" from the main menu and choose the desired reset. Follow the on-screen prompts carefully.
3. 10 Modes OBDII Function
This section covers standard OBDII diagnostic functions, essential for emissions-related checks and basic engine diagnostics.
Image: A comprehensive display of the 10 OBDII mode functions, including reading and clearing codes, viewing live data, I/M readiness, and more.
- From the main menu, select "OBDII".
- Li Kòd: Montre Kòd Pwoblèm Dyagnostik (DTC) aktyèl, annatant, ak pèmanan yo.
- Efase kòd: Clears DTCs from the vehicle's computer and turns off the Malfunction Indicator Lamp (MIL).
- Done kouran: Shows real-time data from various sensors and components.
- Eta Preparasyon I/M: Tcheke estati monitè ki gen rapò ak emisyon yo.
- View Friz done ankadreman: Displays a snapshot of vehicle conditions when an emission-related fault code was set.
- Tès Capteur O2: Rekipere rezilta tès siveyans detèktè O2 a.
- Tès Monitè Abò: Retrieves results for emission-related powertrain components and systems that are not continuously monitored.
- Li Enfòmasyon sou Veyikil la: Displays the vehicle's VIN, Calibration ID (CALID), and Calibration Verification Number (CVN).
- Tès aktif: Allows the scanner to control vehicle components for testing purposes.
4. Kontwòl Bi-direksyonèl / Tès aktif
This advanced function allows the diagnostic tool to send commands to the vehicle's Electronic Control Units (ECUs) to activate specific components or perform tests. This is crucial for verifying the functionality of actuators and diagnosing issues that cannot be identified through passive monitoring.
Imaj: Egzamples of bi-directional control tests, specifically for the fuel pump and A/C clutch, demonstrating the scanner's ability to command vehicle components.
- From the main menu, navigate to "Diagnose" and then select the specific system or function that supports active tests.
- Common active tests include turning the fuel pump on/off, cycling the A/C clutch, or performing evaporative emissions leak tests.
- Follow the on-screen instructions to perform the desired active test. Observe the component's response to verify its operation.
5. Multi-Language Options and Software Updates
The AUTOOL CS605 supports a wide array of languages for user convenience and offers flexible software update options.
Image: The scanner's interface displaying various language options and an indicator for Wi-Fi connectivity for software updates.
- Seleksyon Lang: To change the language, go to "Settings" from the main menu and select "Language". Choose from English, Portuguese, Hungarian, Russian, Polish, Dutch, Italian, Spanish, French, German, Turkish, Simplified Chinese, Traditional Chinese.
- Mizajou lojisyèl: The device supports lifetime free updates via Wi-Fi or USB.
- Mizajou Wi-Fi: Connect the device to a stable Wi-Fi network via "Settings" > "WLAN". Then, select "Update" from the main menu to check for and install available updates.
- Mizajou USB: Connect the scanner to a computer using the provided USB Type-C cable. Follow instructions on the AUTOOL website for PC-based updates.
Antretyen ak Swen
Proper maintenance ensures the longevity and optimal performance of your AUTOOL CS605 scanner.
- Netwayaj: Sèvi ak yon twal mou epi sèk pou netwaye aparèy la. Evite itilize pwodui netwayaj abrazif oswa solvan ki ka domaje ekran an oswa...asing.
- Depo: Store the scanner in a cool, dry place, away from direct sunlight and extreme temperatures. Use the provided carrying case for protection when not in use.
- Swen kab: Inspect the diagnostic cable regularly for any signs of wear or damage. Do not bend or crimp the cable excessively.
- Mizajou lojisyèl: Regularly check for and install software updates to ensure compatibility with the latest vehicle models and to access new features and bug fixes.
Depanaj
If you encounter issues while using your AUTOOL CS605, refer to the following common troubleshooting steps:
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Aparèy pa limen. | No power from OBDII port; loose connection; vehicle ignition off. | Ensure cable is securely connected. Check vehicle's OBDII port for power (some vehicles require ignition ON). Try on another vehicle if possible. |
| Erè kominikasyon ak machin nan. | Incorrect protocol; faulty cable; vehicle's ECU issue. | Verify vehicle's ignition is ON. Check cable for damage. Ensure the vehicle supports standard OBDII protocols. Try restarting the scanner and vehicle. |
| Scanner freezes or responds slowly. | Software glitch; low internal memory. | Restart the device. Perform a software update if available. |
| Unable to perform a specific reset function. | Vehicle incompatibility; incorrect procedure. | Not all functions are universally compatible with all vehicles. Refer to the vehicle's service manual or contact AUTOOL support with your VIN for compatibility verification. Ensure all pre-conditions for the reset are met. |
For issues not covered here, please contact AUTOOL customer support.
Espesifikasyon pwodwi
| Spesifikasyon | Detay |
|---|---|
| Nimewo Modèl | CS605 |
| Mak | AUTOOL |
| Dimansyon pwodwi | 19 x 29 x 10.5 cm |
| Pwa atik | 1.42 kg |
| Sistèm operasyon | Android 4.0 |
| Rezolisyon ekspozisyon | 1600 * 1200 |
| Entèfas kominikasyon | USB / RJ45 / WLAN |
Garanti ak sipò
AUTOOL is committed to providing high-quality products and customer satisfaction.
- Mizajou gratis pou tout lavi: The AUTOOL CS605 comes with lifetime free software updates, ensuring your device remains compatible with new vehicle models and features. Regularly check for updates via Wi-Fi or USB.
- Sipò Kliyan: For technical assistance, troubleshooting, or compatibility inquiries, please contact AUTOOL customer support. When contacting support, please have your product model (CS605) and vehicle VIN (if applicable) ready.
- Nòt konpatibilite: As stated in the product features, service functions and special functions are not universally compatible with all vehicles. It is recommended to send your vehicle's VIN to AUTOOL support to check compatibility for specific functions before purchase or use.
