Paulmann 93096

Paulmann 93096 Calla LED Recessed Spotlights Kit (3-Pack) - Instruction Manual

Modèl: 93096

Entwodiksyon

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Paulmann 93096 Calla LED Recessed Spotlights Kit. This kit includes three versatile, matte black LED spotlights designed for various indoor environments, including damp rooms, thanks to their IP65 splash protection. Key features include the White Switch function for adjustable color temperature and an integrated memory function.

Please read these instructions carefully before installation and use to ensure safe and optimal performance of your Paulmann Calla LED spotlights. Keep this manual for future reference.

Paulmann 93096 Calla LED Recessed Spotlights Kit packaging and a single spotlight

Image: Paulmann 93096 Calla LED Recessed Spotlights Kit, showing the product packaging and a single spotlight unit.

1. Enstalasyon ak Enstalasyon

Before beginning installation, ensure the main power supply is switched off at the circuit breaker to prevent electrical shock. Installation should be performed by a qualified electrician if you are unsure.

1.1 Zouti obligatwa (ki pa enkli)

  • Hole saw (68 mm diameter)
  • Tournvis
  • Denude Fil
  • Voltage tèsteur

1.2 Etap enstalasyon yo

  1. Prepare twou montaj la: Using a 68 mm diameter hole saw, cut a circular opening in the ceiling or mounting surface. Ensure the cavity depth is at least 40 mm, with an installation depth of 55 mm required for the fixture.
  2. Installation diagram for Paulmann Calla LED spotlight showing dimensions

    Image: Detailed installation diagram illustrating the required hole diameter (68mm), fixture diameter (90mm), minimum cavity depth (40mm), and total installation depth (55mm).

  3. Koneksyon elektrik: Open the connection box attached to each spotlight. Connect the main power supply wires (Live 'L' and Neutral 'N') to the corresponding terminals within the connection box. Ensure all connections are secure.
  4. Close-up of the Paulmann LED spotlight connection box with L and N terminals

    Imaj: Gwo plan view of the electrical connection box, showing the 'L' (Live) and 'N' (Neutral) terminals for wiring.

  5. Sekirize dokiman Pwen Enpòtan an: Fold back the spring clips on the sides of the spotlight fixture. Insert the spotlight into the prepared hole. The spring clips will automatically secure the fixture in place against the ceiling.
  6. Three Paulmann Calla LED spotlights with their connection boxes

    Image: A set of three Paulmann Calla LED spotlights, each connected to its individual wiring box, ready for installation.

  7. Repeat for all spotlights: Follow these steps for each of the three spotlights in the kit.
  8. Retabli pouvwa: Once all spotlights are securely installed and wired, restore power at the circuit breaker.

Important: Ensure proper IP65 rating is maintained, especially in damp environments like bathrooms. The IP65 rating protects against dust ingress and low-pressure water jets from any direction.

Bathroom diagram showing different IP protection zones for lighting

Image: Diagram illustrating various IP protection zones within a bathroom, indicating where IP65 and IP67 rated fixtures are suitable. The Paulmann Calla spotlights are IP65 rated.

2. Operasyon Enstriksyon

2.1 White Switch Function (Color Temperature Adjustment)

The Paulmann Calla spotlights feature a "White Switch" function, allowing you to cycle through different color temperatures using your standard wall light switch.

  • To Change Color Temperature: Turn the light switch OFF and then immediately ON again. Each quick toggle will cycle the spotlight through the available color temperatures:
    • Warm White (3000K) - For a relaxing atmosphere.
    • Neutral White (4000K) - For general illumination and tasks.
    • Daylight White (6500K) - For bright, invigorating light.
  • Fonksyon memwa: The integrated memory function will save the last selected color temperature if the light remains ON for more than 5 seconds. The next time you turn the light on, it will recall the previously set color.
Three Paulmann Calla LED spotlights showing different color temperatures: warm white, neutral white, and daylight white

Image: Illustration of the White Switch function, displaying the three distinct color temperatures (Warm White, Neutral White, Daylight White) available from the spotlights.

Three Paulmann Calla LED spotlights with a visual representation of color temperature zones

Image: A visual representation of the color temperature zones within the spotlight, indicating the transition between warm and cool light.

2.2 Adjusting Spotlight Angle

The Calla spotlights are orientable, allowing you to direct the light beam precisely where needed. Gently tilt the inner light module to adjust the angle of illumination.

Close-up of a single Paulmann Calla LED spotlight showing its adjustable angle

Image: Close-up of a single Paulmann Calla LED spotlight, demonstrating its ability to be angled to direct light.

3. Antretyen

  • Netwayaj: To clean the spotlights, ensure the power is off. Use a soft, dry, or slightly damp twal. Pa sèvi ak pwodui netwayaj abrazif oswa solvan, paske sa yo ka domaje fini an oswa konpozan elektrik yo.
  • Dirije lavi: The integrated LED light sources are designed for a long operational life. The LEDs are not replaceable. If an LED fails, the entire fixture must be replaced.
  • Enspeksyon: Periodically inspect the spotlights for any signs of damage or loose connections. If any issues are found, disconnect power and consult a qualified electrician.

NAN. Depanaj

PwoblèmKòz posibSolisyon
Spotlight does not illuminate.No power supply; loose wiring; faulty fixture.Check circuit breaker. Verify wiring connections in the junction box. If problem persists, contact support.
White Switch function not working.Switching too slowly; memory function active.Ensure quick OFF/ON toggles. If a color was set for >5 seconds, it will be recalled. Try multiple quick toggles.
Limyè a tranble oswa li diminye sanzatann.Unstable power supply; loose connection; incompatible dimmer (if applicable).Check power supply stability. Verify all wiring connections. These spotlights are not explicitly stated as dimmable, avoid using with non-compatible dimmers.

5. Espesifikasyon

KarakteristikDetay
MakPaulman
Nimewo Modèl93096
Dimansyon pwodwi (L x W x H)9 x 9 x 5.5 cm
Pwa480 g (for the kit)
Evalyasyon Pwoteksyon Ingress (IP).IP65 (Pwoteksyon kont pousyè, pwoteksyon kont jè dlo)
Number of Spotlights3
StyleModèn
KoulèMat Nwa
FòmRound
MateryèlPlastik
Voltage230 Volts
Itilizasyon espesifikHallway, Bathroom (damp zòn)
Karakteristik espesyalWhite Switch (adjustable color temperature), Orientable
Kalite sous limyèEntegre dirije
Luminous Flux (per spotlight)550 Lumen
Power (per spotlight)5.5 Watts (Total 16.5 Watts for 3)
Incandescent Equivalent (per spotlight)48 Watts
Endèks rann koulè (CRI)80
Ranje Tanperati Koulè3000K (Warm White), 4000K (Neutral White), 6500K (Daylight White)
Klas efikasite enèjiF
Kalite aliyeAnkastre (Plafon)
Dyamèt twou obligatwa68 mm
Pwofondè Minimòm Kavite a40 mm
Pwofondè enstalasyon55 mm

6. Enfòmasyon sou Garanti

Paulmann provides a 5-ane garanti on this product. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. The warranty does not cover damage resulting from improper installation, misuse, or unauthorized modifications.

Paulmann 5-year warranty logo on installation diagram

Image: The Paulmann 5-year warranty logo, as seen on the product's installation diagram.

7. Sipò ak Kontak

For further assistance, technical support, or warranty claims, please contact Paulmann customer service. Refer to the official Paulmann websit la oswa anbalaj pwodwi a pou jwenn enfòmasyon kontak ki pi resan yo.

Paulman Websit: www.paulmann.com

Dokiman ki gen rapò - 93096

Preview Gid Enstalasyon ak Sekirite pou Liminè Ankastre Paulmann LED
Gid konplè pou aparèy ankastre Paulmann LED yo, ki kouvri enstalasyon, enstriksyon sekirite, posiblite pou ranplase konpozan yo, ak enfòmasyon sou efikasite enèji. Gen ladan nimewo pwodwi 934.39 jiska 934.45.
Preview Gid Sekirite ak Enstalasyon pou Limyè Ankastre LED Paulmann 925.29/925.30
Enstriksyon sekirite detaye ak gid enstalasyon pou limyè ankastre LED Paulmann 925.29 ak 925.30 yo. Gen ladan dyagram etap pa etap ak enfòmasyon esansyèl sou koneksyon elektrik.
Preview Paulmann 947.78 Kikolo Eksteryè Mi Luminaire Gid Enstalasyon
Gid enstalasyon konplè pou aparèy limyè miray ekstèn Paulmann 947.78 Kikolo a. Gen ladan l enstriksyon sekirite, etap asanblaj, gid fil elektrik, ak espesifikasyon pwodwi pou limyè deyò sa a ki gen klasman IP65.
Preview Paulmann Plug & Shine Floor Individual Spot IP67 Installation Guide
Comprehensive installation guide for the Paulmann Plug & Shine Floor Individual Spot IP67 LED luminaire, detailing mounting, electrical connections, component replaceability, and safety information.
Preview Gid Enstalasyon Paulmann Plug & Shine Floor Mini Basic Set pou Liminè LED Ankastre pou Planche
Enstriksyon enstalasyon ak operasyon pou Paulmann Plug & Shine Floor Mini Basic Set LED ki ankastre pou planche a (Atik-Nr. 936.97, 936.98). Gen ladan enfòmasyon sou sekirite, etap enstalasyon, posiblite pou ranplase, ak eliminasyon.
Preview Gid Enstalasyon Paulmann 94504/94595 Liminè LED Ankastre nan Tè pou Kay Entelijan Zigbee
Detailed installation and safety instructions for the Paulmann 94504/94595 LED ground recessed luminaire. Features Smart Home Zigbee 3.0 connectivity, IP67 rating, and 230V power. Includes multilingual guidance on installation, replaceability, and disposal.