1. Entwodiksyon
The Xetron LMG-10X Digital Manifold Gauge is an advanced tool designed for HVAC and refrigeration systems. It provides precise measurements for pressure, temperature, vacuum, and automatically calculates superheat and subcooling. This manual will guide you through the setup, operation, and maintenance of your device.
Figure 1: Xetron LMG-10X Digital Manifold Gauge with included accessories.
2. Enfòmasyon sou Sekirite
Always read and understand all safety warnings and instructions before using the device. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Asire w ke tout koneksyon an sekirite anvan ou opere.
- Pa ekspoze aparèy la anba tanperati ekstrèm oswa anba limyè solèy dirèk pou yon peryòd tan pwolonje.
- Use only specified accessories and probes.
- Kenbe aparèy la lwen dlo ak lòt likid.
- Refere sèvis yo bay pèsonèl ki kalifye sèlman.
3. Pake kontni
Verifye ke tout atik ki nan lis anba a yo prezan nan pakè ou a:
- 1 x Xetron Digital Manifold Gauge (LMG-10X)
- 2 x Clamp Tanperati sond
- 1 x ka pote
- 1 x Manyèl Itilizatè (dokiman sa a)
Figure 2: What's in the box - Xetron Digital Manifold and Clamp Temperature Probes.
4. Enstalasyon
4.1. Premye Limen
- Insert batteries into the compartment on the back of the unit (if not pre-installed).
- Peze epi kenbe bouton pouvwa a (⏻) pou limen aparèy la.
- The LCD screen will illuminate and display the initial measurement interface.
4.2. Connecting Probes and Hoses
Konekte clamp temperature probes to the designated ports on the manifold. Ensure a secure connection. Refrigerant hoses (not included) can be connected to the 1/4" SAE threaded connectors at the bottom of the unit.
Figure 3: Connecting the Xetron LMG-10X to an HVAC system.
5. Operasyon Enstriksyon
5.1. Pressure and Temperature Measurement Mode
This mode displays real-time pressure and temperature readings, along with calculated saturation temperatures (VSAT, LSAT).
Figure 4: Interface for Pressure and Temperature Measurement Mode.
5.2. Superheat and Subcooling Measurement
The device automatically calculates superheat (SH) and subcooling (SC) values based on the selected refrigerant and measured parameters.
Figure 5: Display showing Superheat and Subcooling measurements.
5.3. Pressure Hold Test Mode
To enter Pressure Hold Test mode, briefly press the MÒD bouton ki te swiv pa JWE/POZ button from VAC mode. This mode allows you to monitor pressure changes over time.
Figure 6: Interface for Pressure Hold Test Mode.
5.4. Unit Settings and Auto Shutdown
The device allows for conversion of various measurement units and configuration of automatic shutdown settings.
Figure 7: Temperature Unit Setting.
Figure 8: Pressure Unit Setting.
Figure 9: Auto Shutdown OFF.
Figure 10: Auto Shutdown ON.
6. Built-in Refrigerant Database
The Xetron LMG-10X comes with a comprehensive database of 88 types of refrigerants, allowing for accurate calculations and measurements across various systems.
Figure 11: Partial list of supported refrigerants.
7. Antretyen
7.1. Netwayaj
Siye aparèy la ak yon mou, damp twal. Pa sèvi ak pwodui netwayaj abrazif oswa solvan. Asire w ke aparèy la sèk anvan ou sere l.
7.2. Depo
Store the device in its carrying case in a cool, dry place when not in use. Remove batteries if storing for extended periods to prevent leakage.
NAN. Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Aparèy pa limen. | Pil ki fèb oswa ki mouri; pil ki mal mete. | Ranplase pil yo; asire w ke polarite a kòrèk. |
| Lekti ki pa kòrèk. | Probes not properly connected; incorrect refrigerant selected. | Check probe connections; verify selected refrigerant matches system. |
| Ekran an fèb oswa li ap tranble. | Ba pouvwa batri. | Ranplase pil. |
9. Espesifikasyon
- Modèl: XT-LMG-10X-EU
- Dimansyon (L x W x H): 37 x 30 x 10 cm (14.57 x 11.81 x 3.94 pous)
- Pwa atik: 1.2 kg (2.65 liv)
- Materyèl: Akrilonitrile butadien stirèn (ABS)
- Refrigerant Database: 88 kalite
- Fonksyon: Pressure & Temperature Measurement, Vacuum Measurement, Pressure Hold Test, Automatic Shutdown, Temperature Compensation
10. Garanti ak sipò
Xetron offers a one-year warranty for the LMG-10X Digital Manifold Gauge. For any questions or support needs, please contact Xetron customer service. We are committed to providing lifetime customer service.
For further assistance, please visit the official Xetron websit la oubyen kontakte chanèl sipò yo.
