hygger Advanced Remote Control Aquarium Light HG016 Instruction Manual

Pwodwi souview

The hygger Advanced Remote Control Aquarium Light HG016 is a customizable full spectrum LED lighting solution designed for freshwater planted tanks. It features various modes including DIY, Default, and Weather, all controllable via a remote with an LCD display. This light is engineered to promote plant growth and enhance the visual appeal of your aquarium.

Kontni pake

Tanpri asire w ke tout konpozan yo prezan anvan ou kontinye ak enstalasyon an.

• hygger Advanced Remote Control Aquarium Light (HG016)
• Kontwòl remote ak ekran LCD
• Adaptè pouvwa
• Extendable Mounting Brackets (2 pieces)
• Manyèl itilizatè

Image: The hygger aquarium light, remote control, power adapter, and mounting brackets laid out after unboxing.

Enstalasyon ak Enstalasyon

1. Tache Parantèz Montaj: Slide one metal bracket onto each end of the light fixture. The brackets are designed to extend and fit tanks from 24 to 30 inches in length.
   

   Image: Close-up of a hand sliding an extendable metal bracket onto the end of the hygger LED light fixture.

2. Pozisyon limyè a: Place the assembled light fixture securely on top of your aquarium. Ensure the brackets are firmly seated on the tank edges.
   

   Image: The hygger aquarium light is positioned on top of a fish tank, with its brackets resting on the tank's edges.
3. Konekte pouvwa: Plug the power adapter into the light fixture, then plug the adapter into a suitable power outlet.

Enstriksyon Operasyon

The hygger HG016 aquarium light offers multiple operating modes and customizable settings via its remote control.

Remote kontwòl souview

Image: A detailed image of the remote control, highlighting its LCD screen and various buttons for mode selection, color, brightness, and timing.

Mete lè nan jounen an

To set the current time on the remote, long-press the "SET" button until the hour digit flashes. Use the UP/DOWN buttons to adjust the hour, then press "SET" again to move to minutes. Adjust minutes with UP/DOWN and press "SET" to save.

Seleksyon mòd

1. Default Mode (24/7 Cycle)

This mode simulates a natural 24-hour day cycle, providing a gradual sunrise, bright daylight, gentle sunset, and 4 hours of moonlight before turning off. To activate, press the "24/7" button on the remote.

2. Day & Moon Light Mode

This mode offers full spectrum lighting during the day and blue light at night. You can customize your own color blends.

Image: Diagram illustrating the initial program for Day-Light Mode and Moon-Light Mode, showing light intensity over time.

3. DIY Mode

Divide the 24 hours into 8 phases. You can customize the time, color, and brightness for each phase (L1-L8).

Image: Diagram illustrating the 8 phases of the DIY mode for a 24-hour lighting cycle, including sunrise, daylight, sunset, moonlight, and off periods.

4. Weather Mode

Choose from preset weather effects like sunrise, sunset, cloudy, and lightning to add dynamic visual effects to your tank.

Ajisteman klète

Use the UP/DOWN arrow buttons on the remote to adjust the brightness level from 10% to 100% (10 levels).

Opsyon koulè

Press the power/mode button to cycle through 7 spectrum colors (red, green, blue, purple, orange, cyan, yellow) and a full spectrum white light.

Antretyen

The light features a high-quality aluminum shell for improved heat dissipation and a high light transmission PC lamp cover to prevent water splashing.

• Netwayaj: The aluminum housing is smooth and easy to wipe clean with a paper towel to remove dirt or gunk.
• Rezistans dlo: The light is IP68 waterproof, meaning it can withstand splashes and temporary submersion. However, avoid prolonged submersion of the remote control as it is not waterproof.

Depanaj

• Pouvwa Outage: If power goes out, the light has a memory function that will restore your last settings once power is re-established. No need to reset.
• Pwoblèm kontwòl remote: Ensure the cell battery in the remote is correctly installed. The remote operates within a range of 32 feet.
• Light Not Bright Enough: Adjust the brightness using the UP/DOWN arrow buttons on the remote.
• Kwasans alg: Excessive light can promote algae growth. Utilize the timer function to set appropriate lighting durations (6, 10, or 12 hours) or adjust brightness levels.

Espesifikasyon

Garanti ak sipò

This hygger product comes with a one-year warranty. For any issues or assistance, please contact hygger customer support.

• Peryòd garanti: Yon ane apati dat acha a.
• Kontakte sipò: Refer to the user manual for specific contact details or visit the official hygger websit.

Visit the hygger Store on Amazon