OOYCYOO 100 Amp MPPT Solar Charge Controller 12V/24V User Manual

1. Entwodiksyon

Thank you for choosing the OOYCYOO 100 Amp MPPT Solar Charge Controller. This device is designed to efficiently manage power flow from your solar panels to your battery bank, ensuring optimal charging and system protection. It is compatible with 12V and 24V battery systems and supports various battery types including AGM, Sealed, Gel, Flooded, and Lithium batteries.

2. Enstriksyon Sekirite

• Li tout enstriksyon yo ak anpil atansyon anvan enstalasyon ak operasyon.
• Ensure all wiring is correctly polarized (positive to positive, negative to negative) to prevent damage.
• Always connect the battery to the charge controller first, before connecting solar panels. Disconnect solar panels first, then the battery.
• Sèvi ak fil ki gen bon epesè pou tout koneksyon yo pou jere kouran nominal la.
• Install the controller in a well-ventilated area to prevent overheating.
• Avoid short circuits and reverse polarity connections.
• Pa eseye demonte oswa repare kontwolè a tèt ou. Kontakte pèsonèl kalifye pou sèvis.

3. Pwodwi Features

• MPPT (Maximum Power Point Tracking) technology for efficient solar energy harvesting (≥99% tracking rate, >98% conversion rate).
• Volim sistèm otomatik 12V/24Vtage idantifikasyon.
• Compatibility with multiple battery types: USER (customizable for Lithium, LiFePO4, Li(NiCoMn)O2), Flooded, Sealed, and Gel batteries.
• User-programmable settings for absorption voltage, k ap flote voltage, ak ba voltage dekonekte.
• Comprehensive protection features: PV over current/power, PV short circuit, PV reverse polarity, night reverse charging, battery reverse polarity, battery over voltage, battery over discharge, battery overheating, controller overheating, lithium battery low temperature, load short circuit, load overload, TVS high voltage pasajè.
• Built-in cooling fan with intelligent temperature control (ON >45℃, OFF <40℃) and porous heat dissipation for extended lifespan.
• Blacklight LCD Display showing charge amount (KWH) and other parameters.
• Max PV input power: 1300W (12V system), 2600W (24V system).
• Max PV sikwi louvri voltage: 100VDC.

4. Pake kontni

• 1 x OOYCYOO 100A MPPT Solar Charge Controller
• 1 x Capteur Tanperati
• 1 x Manyèl Itilizatè (Angle)

5. Espesifikasyon

6. Enstalasyon ak Enstalasyon

6.1. Unboxing and Overview

Upon unboxing, inspect the charge controller for any visible damage. Familiarize yourself with the device's layout and connection points.

6.2. Monte

Mount the charge controller vertically on a non-flammable surface in a dry, well-ventilated area, away from direct sunlight and heat sources. Ensure sufficient clearance around the unit for proper airflow, especially around the cooling fans.

6.3. Koneksyon fil elektrik

Follow the wiring sequence carefully to avoid damage to the controller or batteries. The controller accepts up to 6 AWG wire for main power connections. Ensure all connections are tight and secure.

1. Koneksyon batri: Connect the battery cables to the BATTERY terminals on the controller first. Ensure correct polarity (positive to positive, negative to negative).
2. Koneksyon Panèl Solè: Connect the solar panel cables to the SOLAR PANEL terminals. Ensure correct polarity.
3. Koneksyon Chaj (Si ou vle): If using the DC load output, connect your DC loads to the DC LOAD terminals. Ensure correct polarity.
4. Capteur Tanperati: Plug the included temperature sensor into the designated port. Attach the sensor to the battery for accurate temperature compensation during charging.

For a visual guide on setting up a solar system with a charge controller and inverter, refer to the video below:

6.4. Inisyal Konfigirasyon

After all connections are made, the controller will power on. You may need to configure the battery type and system voltage if it's not automatically detected or if you are using a custom battery type like Lithium.

The controller features a blacklight LCD display for easy monitoring and configuration. Use the buttons to navigate through the menu and adjust settings as needed. For detailed instructions on setting battery parameters, refer to the specific section in the printed user manual.

7. Operasyon Enstriksyon

The LCD display provides real-time information about your solar system. Use the navigation buttons (Menu, Up, Down, Enter) to view different parameters and access settings.

7.1. Ekspozisyon LCD aview

The display shows various parameters such as:

• PV Voltage ak Kouran
• Batri Voltage ak Kouran Chaje
• Chaj Voltage ak Kouran
• Pousan kapasite batritage
• Tanperati anbyen
• Cumulative Power Generation (KWH)
• Error/Fault Indicators

7.2. Setting Battery Parameters

To optimize charging for your specific battery type, you can adjust parameters like absorption voltage, flote voltage, ak ba voltage disconnect. Consult the detailed instructions in the full user manual for precise steps on how to enter the settings menu and modify these values.

7.3. Kontwòl chaj

The controller features a programmable load timer. You can set the load to turn on/off at specific times or based on battery voltage levels. This feature helps conserve battery power and manage your DC loads efficiently.

8. Antretyen

• Tcheke tout koneksyon fil elektrik yo regilyèman pou wè si yo sere epi si gen korozyon.
• Keep the controller's cooling vents clear of dust and debris to ensure proper heat dissipation.
• Periodically inspect the battery terminals for corrosion and clean if necessary.
• Siveye ekran LCD a pou nenpòt kòd erè oswa lekti dwòl.

NAN. Depanaj

If you encounter issues with your OOYCYOO MPPT Solar Charge Controller, refer to the following general troubleshooting tips:

• Pa gen ekspozisyon/Pa gen kouran: Tcheke koneksyon batri yo epi asire w ke vòltaj batri atage is above the minimum operating voltage.
• Pa gen chaj: Verify solar panel connections and ensure sufficient sunlight. Check for any PV over current/short circuit protection activation.
• Twòp dechaj batri: Ajiste volim ki ba atage disconnect setting if necessary. Ensure your loads are not exceeding the battery's capacity.
• Kòd erè: Consult the full user manual for a list of specific error codes and their corresponding solutions.

For issues related to battery activation or if your battery is not working as expected, the following video provides helpful steps:

10. Garanti & Sipò

For warranty information, technical support, or service inquiries, please refer to the contact details provided in your product packaging or visit the OOYCYOO official websit la. Kenbe resi acha ou kòm prèv acha.