Storkcraft Santa Monica 5-in-1 Convertible Crib Instruction Manual

1. Entwodiksyon

This manual provides essential instructions for the safe assembly, use, and maintenance of your Storkcraft Santa Monica 5-in-1 Convertible Crib. Please read all instructions carefully before assembly and keep this manual for future reference. The Storkcraft Santa Monica crib is designed to adapt to your child's growth, converting from a crib to a toddler bed, daybed, and full-size bed.

Image 1: The Storkcraft Santa Monica 5-in-1 Convertible Crib in its crib configuration, featuring a white finish with a vintage driftwood base.

Image 2: The Storkcraft Santa Monica crib placed in a modern nursery, showcasing apèl estetik li.

2. Enfòmasyon sou Sekirite

Your child's safety is paramount. Always follow these safety guidelines. Failure to do so can result in serious injury or death.

• Li tout enstriksyon yo: Assemble the crib according to the manufacturer's instructions.
• Tcheke pou domaj: Periodically check the crib for damaged hardware, loose joints, missing parts, or sharp edges. Do not use the crib if any parts are missing or broken.
• Gwosè matla: Use only a mattress that is at least 27 1/4 inches (69 cm) by 51 5/8 inches (131 cm) with a thickness not exceeding 6 inches (15 cm). The mattress must fit snugly without gaps.
• Child's height/weight: This crib is intended for use until your child can easily climb out or is taller than 35 inches (89 cm). The maximum weight recommendation is 50 pounds.
• Avoid suffocation hazards: Do not place the crib near windows where cords from blinds or drapes could strangle a child. Do not place items with a string or cord around a child's neck, such as hood strings or pacifier cords. Do not suspend strings over a crib or attach strings to toys.
• No soft bedding: Never use plastic shipping bags or other plastic film as mattress covers. They can cause suffocation. Do not place pillows, comforters, or other soft bedding in the crib with an infant.
• Sètifikasyon GREENGUARD Gold: This product has been screened for over 10,000 chemicals and volatile organic compounds (VOCs) known to pollute indoor air, contributing to a healthier nursery environment.
• Sètifye JPMA: Expert tested by independent laboratories to meet or exceed all applicable category voluntary and mandatory safety standards.

Image 3: Safety certifications for the Storkcraft Santa Monica Crib, including GREENGUARD Gold and JPMA Certified badges.

3. Lis Pati

Before beginning assembly, ensure all parts and hardware are present. Refer to the included assembly instructions for a detailed list and diagrams.

• Crib Panels (Headboard, Footboard, Side Rails)
• Baz Sipò Matla
• Materyèl (Vis, Boulon, Ronèl, Kle Allen)
• Enstriksyon Asanble

Note: Mattress, toddler guardrail, and full-size bed conversion kit are sold separately.

4. Enstalasyon ak Asanble

Assembly requires two adults. Follow the step-by-step instructions provided in the separate assembly manual included with your product.

1. Depake konpozan: Retire tout pyès yo nan anbalaj la avèk prekosyon epi mete yo sou yon sifas ki mou epi pwòp pou evite reyur.
2. Atache ray bò yo: Secure the side rails to the headboard and footboard using the provided hardware. Ensure all connections are tight.
3. Enstale sipò matla a: Insert the mattress support base into the designated slots on the side rails. Choose the appropriate height setting for your infant (see Section 5 for details).
4. Tèks final yo: Double-check all screws and bolts to ensure they are securely fastened. Do not overtighten.

Imaj 4: Devan view of the assembled crib, highlighting the clean lines and sturdy construction.

Imaj 5: Kote view of the assembled crib, showing the vertical slats and two-tone design.

5. Operasyon Enstriksyon

5.1 Ajisteman wotè matla a

The Storkcraft Santa Monica crib features a 3-position adjustable mattress support base. Adjust the mattress height according to your child's developmental stage pou asire sekirite.

• Pozisyon ki pi wo: For newborns and infants who cannot push up on their hands and knees. This position allows easier access to your baby.
• Pozisyon Mwayen: For infants who can push up on their hands and knees, or sit unassisted.
• Pozisyon ki pi ba: For active babies who can stand. This position prevents your child from climbing out of the crib.

To adjust the mattress height, carefully remove the mattress and mattress support. Reposition the support to the desired height and re-secure it with the appropriate hardware. Always ensure the mattress support is level and securely fastened before placing your child in the crib.

Image 6: Diagram illustrating the three adjustable mattress height positions of the crib.

5.2 Conversion Instructions

The Santa Monica crib converts into a toddler bed, daybed, and full-size bed. Conversion kits (toddler guardrail, full-size bed rails) are sold separately. Refer to the specific conversion kit instructions for detailed steps.

• Kabann pou timoun piti: Remove the front side rail and install the toddler guardrail (sold separately).
• Kabann pou jounen: Remove the front side rail. No guardrail is used for this configuration.
• Kabann gwosè konplè: Remove both side rails and the mattress support. Attach the headboard and footboard to a full-size bed frame using the full-size conversion kit (sold separately).

Image 7: The crib transformed into a toddler bed with a safety guardrail.

Image 8: The crib configured as a daybed, suitable for older children.

Image 9: The crib converted into a full-size bed, utilizing the original headboard and footboard.

6. Antretyen ak Swen

Proper care will extend the life and safety of your Storkcraft Santa Monica crib.

• Netwayaj: Siye ak anonsamp twal. Evite pwodui netwayaj abrazif oswa pwodui chimik fò ki ka domaje fini an.
• Enspeksyon regilye: Periodically check all screws, bolts, and hardware to ensure they are tight. Retighten as necessary.
• Depo: If storing the crib, do so in a dry, temperature-controlled environment to prevent warping or damage.

NAN. Depanaj

If you encounter any issues with your crib, please refer to these common solutions:

• Pati ki lach: If any parts feel loose, gently tighten the corresponding screws or bolts. Do not overtighten.
• Kraze: Check all connections and ensure they are tight. A small amount of silicone lubricant can be applied to metal-on-metal contact points if squeaking persists.
• Materyèl ki manke: If you are missing any hardware, contact Storkcraft customer service for replacement parts. Do not substitute with non-manufacturer parts.

8. Espesifikasyon

9. Garanti ak sipò

For warranty information, replacement parts, or customer support, please visit the official Storkcraft websit oswa kontakte depatman sèvis kliyan yo.

Storkcraft Official Websit: www.storkcraft.com