1. Entwodiksyon ak souview
The Fms 1/6 Jimny LJ10 RC Crawler is an officially licensed, highly detailed remote control vehicle designed for hobby enthusiasts. This model accurately reproduces the body details of the original Jimny LJ10, featuring a realistic interior with soft rubber seats, a linkage steering wheel, dashboard, buttons, manual gearshift, and foot pedal set. Equipped with a powerful electronic system and robust chassis, it offers excellent performance across various terrains.
Figure 1: The Fms 1/6 Jimny LJ10 RC Crawler, showcasing its detailed exterior and robust design.
Key features include a 550 brushed motor, 40A waterproof ESC, and a 4-channel receiver for powerful and stable operation. The non-load-bearing chassis, metal beams, and front and rear leaf spring suspensions enhance its stability and off-road capability. A 2.4GHz ANT transmitter provides quick-responsive, interference-free control up to 80m. The vehicle also features an LED lighting system with default headlights and reserved positions for turn signals and taillights, along with operable parts like a tiltable windshield, safety bar, and tailgate.
2. Ki sa ki nan bwat la
- Fms 1/6 Jimny LJ10 RC Crawler (fully assembled)
- 4-Ch 2.4GHz Transmitter
- Manyèl Enstriksyon
- Tools and accessories (e.g., wheel wrench, screwdriver, spare parts - specific items may vary)
Note: Battery and charger are NOT included and must be purchased separately.
3. Enstalasyon
3.1 Enstalasyon Batri (Veyikil)
- Carefully remove the vehicle's body by unlatching the front hood clips and lifting the body shell. The body is typically held by magnetic mounts and hinges at the rear.
- Locate the battery compartment, usually secured with a strap.
- Insert a compatible 2S Li-ion battery (2000mAh recommended) into the compartment and secure it with the strap.
- Konekte batri a ak ESC a (Kontwolè Vitès Elektwonik) lè l sèvi avèk konektè ki apwopriye a.
- Reattach the vehicle body, ensuring the hood clips are securely fastened.
Figure 2: Vehicle with body lifted, showing the battery compartment and electronic components.
3.2 Enstalasyon batri transmetè
- Open the battery compartment on the back of the 2.4GHz transmitter.
- Insert 2 AA batteries (not included), observing correct polarity.
- Fèmen lòj batri a byen.
3.3 Konekte Transmetè ak Reseptè a
The transmitter and receiver are typically pre-bound from the factory. If re-binding is necessary, refer to the detailed instructions in the included user manual for your specific transmitter model.
4. Operasyon Enstriksyon
4.1 Kontwòl debaz yo
- Pouvwa sou: Turn on the transmitter first, then the vehicle's power switch (usually located near the battery/ESC).
- Avant/Anvers: Use the throttle trigger on the transmitter. Pull back for forward motion, push forward for reverse.
- Direction: Use the steering wheel on the transmitter. Turn left to steer left, turn right to steer right.
- Limyè ki ap dirije: The headlights are always on by default when the vehicle is powered on.
- Operable Parts: The windshield, safety bar, and tailgate can be tilted down manually, mimicking the real vehicle.
Figure 3: The Jimny LJ10 RC Crawler demonstrating its off-road capability.
4.2 Konsèy pou Kondui
- Start with slow, controlled movements to get a feel for the vehicle's handling.
- Utilize the vehicle's high articulation and 4WD system for climbing over obstacles.
- Avoid prolonged full-throttle operation, especially on rough terrain, to prevent overheating.
- Always operate your RC crawler in a safe and responsible manner, away from people, pets, and property.
Video 1: Fms 1/6 Suzuki Jimny 4WD Crawler with LED Lights. This video demonstrates the crawler's movement and functional LED lights.
5. Antretyen
5.1 Netwayaj
- After each use, especially in dusty or muddy conditions, clean the vehicle to remove dirt and debris.
- Use a soft brush or compressed air to clean crevices and moving parts.
- Siye kò a ak piblisiteamp twal. Evite itilize pwodwi chimik piman bouk yo.
5.2 Swen Batri
- Always use a charger compatible with Li-ion batteries.
- Pa chaje twòp oswa twòp dechaj pil yo.
- Sere pil yo nan yon kote ki fre, sèk, lwen limyè solèy la dirèk ak tanperati ekstrèm.
- Disconnect the battery from the vehicle when not in use.
5.3 Enspeksyon Jeneral
- Regularly check all screws and fasteners for tightness.
- Enspekte kawotchou yo pou wè si yo mete ak chire.
- Ensure all wiring connections are secure and free from damage.
NAN. Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Machin nan pa limen | Dead battery; Loose battery connection; Vehicle power switch off | Charge battery; Secure connection; Turn vehicle power switch on |
| No response from transmitter | Transmitter batteries dead; Not bound to receiver; Transmitter power switch off | Replace transmitter batteries; Re-bind transmitter/receiver; Turn transmitter power switch on |
| Vehicle moves slowly or inconsistently | Low battery; Obstruction in drivetrain; Motor/ESC issue | Charge battery; Check for debris; Contact support if issue persists |
7. Espesifikasyon
- Nimewo Modèl: FMS10602
- Echèl: 1/6
- Dimansyon pwodwi: 21.5 x 9.2 x 10.5 pous
- Pwa atik: 10.98 liv
- Motè: 550 Motè bwose
- ESC: 40A Waterproof ESC
- Transmetè: 4-Ch 2.4GHz ANT
- Vitès maksimòm: 15 KM/H
- Laj rekòmande: 14+ years (Manufacturer recommended age 0-2 years is likely a misprint for toy safety, actual hobby grade RC is for older users)
8. Garanti ak sipò
For warranty information, technical support, or replacement parts, please refer to the contact details provided in your product packaging or visit the official Fms websit la. Kenbe resi acha ou kòm prèv acha pou nenpòt reklamasyon garanti.
