Manyèl Itilizatè Fanatik Ka AZZA Hurricane III ARGB 120mm

1. Entwodiksyon

The AZZA Hurricane III ARGB Case Fan 120mm is designed to provide efficient cooling and vibrant digital RGB lighting for your computer system. Featuring a dual-ring design with individually addressable RGB LED diodes (5V), this fan enhances both performance and aesthetics. Its unique blade design improves airflow, while rubber pads on all four corners reduce vibration and noise, ensuring quiet operation. The fan can be synchronized with compatible motherboards or lighting controllers for customizable lighting effects and fan speed control.

2. Enfòmasyon sou Sekirite

• Ensure your power supply is disconnected before installation or maintenance to prevent electrical shock.
• Handle the fan and its components with care to avoid damage.
• Do not expose the fan to excessive moisture or extreme temperatures.
• Verify kòrèk voltage (DC12V for fan, 5V for RGB LED) before connecting to your system. Incorrect voltage can damage the fan or motherboard.
• Kenbe soti nan atenn timoun yo.

3. Pake kontni

Tanpri verifye sa ki nan pake a pou asire w tout atik yo la:

• 1 x AZZA Hurricane III ARGB Case Fan 120mm
• Vis pou monte (jeneralman 4 vis)
• (Optional: RGB controller cable, if included in specific kit)

4. Enstalasyon ak Enstalasyon

Follow these steps to install your AZZA Hurricane III ARGB Case Fan:

1. Prepare Sistèm ou an: Power off your computer and disconnect it from the power outlet. Open your computer case to access the fan mounting locations.
2. Idantifye kote pou monte a: Choose an appropriate 120mm fan mounting spot in your case (e.g., front, rear, top, bottom).
3. Pozisyon fanatik la: Place the fan in the desired mounting position. Ensure the airflow direction is correct for your cooling needs (typically, fans are installed to draw cool air in or exhaust hot air out).
4. Fikse vantilatè a: Use the provided mounting screws to secure the fan to the case. Tighten the screws evenly to prevent vibration. The fan features rubber pads on all four corners to reduce vibration and noise.
5. Konekte pouvwa: Connect the fan's 4-pin PWM connector to an available 4-pin fan header on your motherboard.
6. Connect RGB (if applicable): Connect the fan's 5V 3-pin ARGB connector to a compatible 5V 3-pin addressable RGB header on your motherboard or an ARGB controller. Do not connect to a 12V RGB header, as this will damage the LEDs.
7. Jesyon kab: Route the cables neatly to avoid obstructing airflow and for a clean build.
8. Fèmen bwat la epi limen l: Close your computer case, reconnect the power, and power on your system.

Image 1: The AZZA Hurricane III ARGB Case Fan 120mm, showcasing its dual-ring design and vibrant, individually addressable RGB lighting. The fan features a central AZZA logo and black rubber pads on its corners for vibration dampening.

5. Operasyon Enstriksyon

Once installed, the AZZA Hurricane III ARGB Case Fan operates automatically based on your motherboard's fan control settings. The RGB lighting can be controlled via your motherboard's software or a dedicated ARGB controller.

• Kontwòl vitès fanatik: The fan speed (1000 - 1800 ± 10% RPM) is typically controlled through your motherboard's BIOS/UEFI settings or fan control software. This allows you to adjust the fan's performance based on system temperature or desired noise levels.
• Kontwòl ekleraj RGB:
  • If connected to a motherboard's 5V 3-pin ARGB header, use the motherboard manufacturer's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, GIGABYTE RGB Fusion, ASRock Polychrome Sync) to customize lighting effects, colors, and synchronization with other ARGB components.
  • If connected to a standalone ARGB controller, refer to the controller's manual for instructions on changing lighting modes and colors.

6. Antretyen

Regular maintenance helps ensure optimal performance and longevity of your fan:

• Netwayaj: Periodically clean the fan blades and frame to remove dust buildup. Use compressed air or a soft, dry cloth. Ensure the fan is powered off and disconnected from the system before cleaning.
• Enspeksyon: Check for any loose cables or obstructions around the fan that might impede its operation.
• Portant: The fan uses a Hydro Bearing, which is designed for long-term, quiet operation and typically does not require lubrication.

NAN. Depanaj

8. Espesifikasyon