1. Entwodiksyon
Thank you for choosing the Imetec 16803 Electric Blanket. This manual provides important information regarding the safe operation, installation, maintenance, and troubleshooting of your electric blanket. Please read this manual thoroughly before using the product and retain it for future reference.

Image: The Imetec 16803 Electric Blanket, shown in its white color, laid out flat. This image illustrates the general appearance of the product.
2. Enstriksyon Sekirite Enpòtan
To reduce the risk of burns, electric shock, fire, and injury to persons, this product must be used in accordance with the following instructions:
- Read all instructions before using the electric blanket.
- Do not use this blanket with an infant, a child, an invalid, or any person insensitive to heat.
- Do not use this blanket with a damaged cord or plug. If the cord or plug is damaged, contact qualified service personnel for repair.
- Do not use this blanket in conjunction with another heating appliance.
- Do not use this blanket if it is wet.
- Do not fold, crease, or bunch the blanket during use. Ensure it lies flat on the bed.
- Pa mete zepeng oswa lòt objè metalik nan kouvèti a.
- Do not dry clean this blanket. Dry cleaning solvents may damage the insulation of the heating element.
- Pa fè dra a.
- Toujou debranche kouvèti a nan priz elektrik la lè w pa ap itilize li.
- Kenbe inite kontwòl la lwen kouran lè ak imidite.
- Aparèy sa a pa fèt pou itilize pa moun (ki gen ladan timoun) ki gen kapasite fizik, sansoryèl oswa mantal redwi, oswa ki pa gen eksperyans ak konesans, sof si yo te ba yo sipèvizyon oswa enstriksyon konsènan itilizasyon aparèy la pa yon moun ki responsab sekirite yo.
3. Enstriksyon Enstalasyon
Follow these steps to set up your Imetec electric blanket:
- Dekonpoze: Carefully remove the electric blanket from its packaging. Retain all packaging materials for potential future storage or transport.
- Pozisyon: Lay the blanket flat on your mattress, ensuring it is spread evenly without any folds or creases. The blanket should be placed directly on the mattress, underneath your fitted sheet.
- Konekte inite kontwòl: Locate the connector on the blanket and the corresponding plug on the control unit. Firmly push the plug into the connector until it clicks into place.
- Ploge nan: Insert the power plug of the control unit into a suitable electrical outlet. Ensure the outlet is easily accessible and provides the correct voltage pou aparèy la.
4. Operasyon Enstriksyon
To operate your Imetec electric blanket:
- Limen: With the blanket properly set up and plugged in, switch on the control unit. Typically, there is a power button or a slide switch.
- Chwazi Anviwònman Chalè: Use the control unit to select your desired heat level. Most models offer multiple heat settings, indicated by numbers or symbols. Start with a lower setting and adjust as needed for comfort.
- Pre-chofaj: For best results, turn on the blanket approximately 30 minutes before you intend to use the bed to allow it to pre-heat.
- Etenn: When you are finished using the blanket or before leaving the bed, switch off the control unit and unplug the blanket from the electrical outlet.
5. Antretyen ak netwayaj
Proper care ensures the longevity and safe operation of your electric blanket.
Enstriksyon netwayaj:
- Anvan Netwayaj: Always disconnect the control unit from the blanket and unplug the blanket from the electrical outlet.
- Lave machin: The Imetec 16803 electric blanket is machine washable.
- Tanperati lave: Wash at a maximum temperature of 30°C (86°F) on a gentle cycle.
- Detèjan: Sèvi ak yon savon ki pa twò fò. Pa sèvi ak klowòks.
- Rense: Rense byen.
- Siye: Do not tumble dry. Gently squeeze out excess water. Hang the blanket over a clothesline or shower rod to air dry completely. Ensure the blanket and all connectors are completely dry before reconnecting the control unit and plugging it in.
- Pa Iron: Pa fè dra elektrik la.
- Do Not Dry Clean: Do not dry clean, as solvents can damage the heating elements.
6. Depo
When not in use, especially during warmer months, store your electric blanket properly:
- Ensure the blanket is completely clean and dry before storing.
- Disconnect the control unit from the blanket.
- Gently fold or roll the blanket. Avoid sharp creases that could damage the internal wiring.
- Store the blanket in its original packaging or a breathable storage bag in a cool, dry place, away from direct sunlight and heavy objects that could compress it.
NAN. Depanaj
If you experience issues with your Imetec electric blanket, please refer to the following common problems and solutions:
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Blanket is not heating. | Pa konekte kòrèkteman. Control unit not connected properly. Pouvwa outage oubyen priz ki gen pwoblèm. Blanket folded or creased. | Asire w ke ploge kouran an byen branche nan yon priz ki fonksyone. Check that the control unit is firmly connected to the blanket. Teste priz la ak yon lòt aparèy. Lay the blanket flat and ensure no folds. |
| Control unit indicator light is off. | Kouran koupe. Inite kontwòl defo. | Limen inite kontwòl la. If the problem persists after checking power connections, contact customer support. |
| Kouvèti a pa chofe inegalman. | Kouvèti a pliye oswa an gwoup. | Ensure the blanket is spread completely flat on the mattress. |
If the problem persists after attempting these solutions, please contact Imetec customer support.
8. Espesifikasyon
- Modèl: Imetec 16803
- Dimansyon: 150 cm (Lajè) x 80 cm (Pwofondè)
- Materyèl: Polyester
- Enstriksyon Swen: Machine washable, maximum 30°C. Do not tumble dry, do not iron, do not dry clean.
- Pouvwa: Refer to the product label on the blanket or control unit for specific voltage ak wattage enfòmasyon.
9. Garanti ak sipò
Imetec products are manufactured to high-quality standards and are covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Imetec websit.
For technical assistance, troubleshooting beyond this manual, or to inquire about spare parts, please contact Imetec customer support. Contact details can typically be found on the product packaging or the official Imetec websit.





