Entwodiksyon
Thank you for choosing the LOAAO 72x36 LED Bathroom Mirror. This manual provides essential information for the safe installation, operation, and maintenance of your new mirror. Please read these instructions thoroughly before beginning installation and retain them for future reference.
This LED mirror features both backlit and front-lit illumination, dimmable brightness, three color temperature options (warm, natural, white), an anti-fog function with a one-hour auto-off timer, and a memory function to recall your last settings. Constructed with 5mm tempered glass, it offers enhanced safety and durability.
Image: The LOAAO 72x36 LED Bathroom Mirror elegantly installed above a double vanity, showcasing its dual lighting.
Enfòmasyon sou Sekirite
Tanpri obsève prekosyon sekirite sa yo pou evite blesi oswa domaj nan pwodwi a:
- Sekirite elektrik: Installation should be performed by a qualified electrician if hardwiring is chosen. Always ensure the power supply is turned off at the circuit breaker before any electrical work. For bathroom installations, outlets should be Ground Fault Circuit Interrupter (GFCI) protected as per electrical codes.
- Tanpered Glass: This mirror is constructed with 5mm tempered glass, which is shatter-proof and explosion-proof. In the event of breakage, it is designed to break into small, less hazardous pieces without splashing.
- Fonksyon anti-bouya: The anti-fog feature utilizes a partial heating pad located in the center of the mirror. For energy efficiency, the heating pad does not cover the entire mirror surface. Therefore, the defogging effect is strongest at the center and gradually decreases towards the edges.
- Manyen: Handle the mirror with care during unpacking and installation. Avoid impacts or excessive pressure on the glass surface.
- ETL ki nan lis: This product is ETL Listed, indicating compliance with North American safety standards.
Kontni pake
Verifye ke tout konpozan yo prezan anvan ou kòmanse enstalasyon an:
- LOAAO 72x36 LED Bathroom Mirror
- Z-bar mounting brackets (2 pieces)
- Montaj vis
- Drywall anchors (Note: For optimal security, consider using construction screws or lag screws directly into wall studs, or higher-quality anchors if studs are not accessible.)
- Manyèl Enstriksyon (dokiman sa a)
Enstalasyon ak Enstalasyon
The mirror can be mounted vertically or horizontally and can be powered via a standard plug-in connection or hardwired directly into your electrical system.
Pre-Enstalasyon
- Inspect the Mirror: Carefully unbox and inspect the mirror for any damage. Report any issues to the retailer immediately.
- Chwazi Kote: Select a suitable wall location, ensuring it can support the mirror's weight (approximately 51 lbs). Consider the proximity to an electrical outlet or wiring.
- Pouvwa Off: Before any electrical work, turn off the power to the installation area at the main circuit breaker.
Enstriksyon pou monte
- Marking: Hold the mirror against the wall in the desired position and mark the locations for the Z-bar brackets. Ensure the marks are level.
- Enstale parantèz: Secure the two Z-bar brackets to the wall using the provided screws and anchors. If possible, screw directly into wall studs for maximum stability.
- Kwoke glas: Carefully lift the mirror and align its back channels with the installed Z-bar brackets. Gently lower the mirror until it securely rests on the brackets. You may need to apply slight downward pressure to ensure it seats properly.
Koneksyon elektrik
The mirror supports both plug-in and hardwired connections.
- Plug-in: The mirror comes with a flat plug designed to sit flush against the wall. Simply plug it into a standard, GFCI-protected electrical outlet.
- Fil elektrik: If hardwiring, it is recommended to consult a qualified electrician. The mirror's wiring may not be color-coded in all instances. Typically, the ground wire has a green tint, the hot wire is ribbed, and the neutral wire is smooth (sometimes with markings). Always verify wire functions with a multimeter if unsure. Ensure all connections are secure and insulated.
Image: The LOAAO LED Bathroom Mirror supports connection to a wall switch for convenient control.
Enstriksyon Operasyon
Your LOAAO LED Bathroom Mirror features intuitive touch controls located on the mirror surface.
Kontwòl manyen
- Limen/Etenyen: A short press on the main power touch button (usually indicated by a circle or power symbol) will turn the mirror lights on or off. When off, the control buttons may glow blue.
- Brightness Adjustment (Dimmable): With the lights on, press and hold the main power touch button to cycle through brightness levels (20% to 100%). Release when the desired brightness is achieved.
- Seleksyon Tanperati Koulè: A short press on the color temperature touch button (often indicated by a sun or light bulb symbol) will cycle through the three available color temperatures: Warm Light (3000K), Natural Light (4000K), and White Light (6000K).
- Fonksyon anti-bouya: Press the anti-fog touch button (often indicated by a steam symbol) to activate the defogging feature. The anti-fog function will automatically turn off after one hour to conserve energy.
Image: Adjusting the mirror's brightness by long-pressing the touch control.
Image: Visual representation of the three distinct color temperature options.
Image: The anti-fog feature ensures a clear reflection even in steamy conditions.
Fonksyon memwa
The mirror is equipped with a memory function that retains your last brightness and color temperature settings. When you turn the mirror back on, it will recall your previous preferences, eliminating the need to reset them each time.
Sous ekleraj doub
This mirror features both backlit and front-lit LED strips, providing comprehensive illumination for various tasks such as makeup application, skincare routines, shaving, and dressing. The combined lighting ensures a bright and even light distribution.
Image: Illustration of the mirror's backlit and front-lit components working together.
Antretyen
Pou asire lonjevite ak pèfòmans optimal glas twalèt LOAAO LED ou a, swiv gid antretyen sa yo:
- Netwayaj: Use a soft, lint-free cloth and a mild, non-abrasive glass cleaner to clean the mirror surface. Spray the cleaner onto the cloth, not directly onto the mirror, to prevent liquid from seeping into the electrical components.
- Evite abrazif: Do not use abrasive cleaners, scouring pads, or harsh chemicals, as these can scratch the glass or damage the LED components and frame.
- Eleman elektrik: Ensure the mirror is unplugged or the power is turned off at the circuit breaker before cleaning any electrical parts.
Image: The tempered glass construction enhances safety and durability compared to ordinary mirrors.
Depanaj
If you encounter any issues with your mirror, refer to the following common problems and solutions:
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Limyè miwa yo pa limen. | Pa gen kouran; koneksyon ki lach; switch ki gen pwoblèm. | Check if the mirror is properly plugged in or hardwired. Verify the circuit breaker is on. Ensure the wall switch (if used) is functional. |
| Anti-fog function is not effective. | Anti-fog not activated; limited heating area. | Ensure the anti-fog button is pressed. Remember the heating pad is centrally located, so defogging is most effective in the center. |
| Kontwòl manyen yo pa reponn. | Temporary electrical glitch; dirty sensor. | Turn off the power to the mirror for a few minutes at the circuit breaker, then restore power. Clean the touch sensor area with a soft, dry cloth. |
| Limyè yo tranble oswa yo diminye sanzatann. | Alimantasyon kouran enstab; fil elektrik ki lach. | Check electrical connections for tightness. Ensure the power supply is stable. If hardwired, consult a qualified electrician. |
If the problem persists after attempting these solutions, please contact LOAAO customer support.
Espesifikasyon
| Mak | LOAAO |
| Nimewo Modèl | L001AC18191 |
| Dimansyon pwodwi | 36"L x 72"Lajè |
| Materyèl | Tanpered Glass |
| Pwa atik | 51 liv |
| Kalite aliye | Mi mòn |
| Karakteristik espesyal | Anti-fog, Dimmable, Backlit + Front Lit, 3 Color Temperature, Memory Function, Waterproof, Shatter-proof Tempered Glass, ETL Listed |
| Koneksyon pouvwa | Branche / Fil elektrik |
Garanti ak sipò
Specific warranty details for the LOAAO 72x36 LED Bathroom Mirror are not provided in this document. For warranty information or technical support, please refer to the official LOAAO website or contact LOAAO customer service directly.
You can also find additional information and resources by visiting the LOAAO Store on Amazon.
A downloadable PDF version of the user manual may also be available: Manyèl itilizatè (PDF)
