Chicco KeyFit 30 ClearTex Infant Car Seat and Base Instruction Manual

1. Entwodiksyon

This manual provides essential information for the proper installation, use, and maintenance of your Chicco KeyFit 30 ClearTex Infant Car Seat and Base. Please read all instructions carefully before using the product to ensure the safety and comfort of your child.

The Chicco KeyFit 30 ClearTex infant Car Seat is designed for infants weighing 4-30 lbs and up to 30 inches in height, for rear-facing use only. It features innovative design for easy and secure installation, a five-point harness system, and energy-absorbing foam for enhanced impact protection. The ClearTex fabrics are flame retardant-free and GREENGUARD Gold Certified for low chemical emissions.

2. Enfòmasyon sou Sekirite

Always prioritize your child's safety. Adhere to all warnings and instructions provided in this manual and on the car seat itself.

• Asire w ke chèz machin nan byen enstale epi byen fèm nan machin ou an.
• Always use the 5-point harness system, ensuring it is snug against your child's body and the chest clip is at armpit level.
• Never place an infant car seat on a front passenger seat with an active airbag.
• Pa sèvi ak chèz machin nan si li te fè yon aksidan, menm si pa gen okenn domaj vizib. Ranplase li imedyatman.
• Regularly check the car seat for any signs of wear or damage.
• Refer to your vehicle's owner's manual for specific car seat installation instructions and LATCH system locations.

3. Konpozan souview

Familiarize yourself with the main components of your Chicco KeyFit 30 car seat and base.

• Infant Car Seat Carrier: The main seat unit for your child.
• Baz pou moun ki rete nan machin nan: The base that remains installed in your vehicle.
• Sistèm senti 5 pwen: Straps and buckle to secure your child.
• Infant Head and Body Support: Removable inserts for newborns (4-11 lbs).
• Kanopi reglabl: Provides shade and privacy.
• Manch pou pote: Two-position handle for easy transport.
• ReclineSure Leveling Foot: Adjustable foot on the base for proper recline angle.
• Endikatè nivo bul RideRight: Visual indicators on the base to confirm correct angle.
• Sere boulon SuperCinch LATCH: Mechanism for secure LATCH installation.
• Integrated Lock-Offs: For secure vehicle seat belt installation.

4. Enstalasyon ak Enstalasyon

Bon enstalasyon enpòtan anpil pou sekirite. Swiv etap sa yo ak anpil atansyon.

4.1. Enstale Baz ki Rete nan Machin nan

The base can be installed using either the vehicle's LATCH system or the vehicle's seat belt.

Using LATCH Connectors:

1. Mete baz chèz machin nan pou l fè fas pa dèyè sou chèz machin nan.
2. Locate your vehicle's lower anchor bars (LATCH).
3. Attach the base's LATCH connectors to the vehicle's lower anchor bars. Ensure an audible click.
4. Press down firmly on the base while pulling the SuperCinch tightener strap to remove slack and secure the base.
5. Check the RideRight bubble level-indicators to ensure the base is at the correct recline angle. Adjust the ReclineSure leveling foot if necessary.
6. Test for tightness: The base should not move more than one inch side-to-side or front-to-back at the belt path.

Image: Chicco KeyFit 30 base being installed using the LATCH system in a vehicle.

Using Vehicle Seat Belt:

1. Mete baz chèz machin nan pou l fè fas pa dèyè sou chèz machin nan.
2. Pase senti ki sou vant ak zepòl machin nan nan chemen senti ki deziyen pou li a sou baz la.
3. Buckle the vehicle seat belt.
4. Engage the integrated lock-offs on the base to secure the seat belt.
5. Press down firmly on the base while pulling the shoulder belt to remove slack and secure the base.
6. Check the RideRight bubble level-indicators to ensure the base is at the correct recline angle. Adjust the ReclineSure leveling foot if necessary.
7. Test for tightness: The base should not move more than one inch side-to-side or front-to-back at the belt path.

Image: Close-up of the Chicco KeyFit 30 base showing the spring-loaded leveling foot for proper angle adjustment.

Image: Close-up of the RideRight bubble level indicator on the Chicco KeyFit 30 base, verifying correct installation angle.

4.2. Attaching the Infant Car Seat Carrier to the Base

1. Align the infant car seat carrier with the installed base.
2. Lower the carrier onto the base until it clicks securely into place.
3. Pull up on the carrier to ensure it is firmly attached to the base.

Image: The infant car seat carrier being effortlessly attached to the installed car seat base.

5. Operasyon Enstriksyon

5.1. Securing Your Child in the Harness

1. Mete pitit ou a sou chèz machin lan.
2. Bring the two shoulder straps together and insert them into the buckle.
3. Mare klip pwatrin lan nan nivo anba bra a.
4. Pull the harness tightening strap at the front of the seat until the harness is snug against your child's body. You should not be able to pinch any slack in the harness straps at the shoulder.

Image: A baby secured in the Chicco KeyFit 30 infant car seat, demonstrating the newborn support and harness system.

5.2. Ajisteman manch lan

The carry handle has two positions. Press the buttons on both sides of the handle simultaneously to adjust its position.

5.3. Using the Canopy

The adjustable canopy can be extended or retracted to provide shade and privacy for your child. It is removable for cleaning.

Image: The Chicco KeyFit 30 infant car seat with its large canopy extended, providing sun protection.

5.4. Removing the Infant Car Seat Carrier from the Base

To remove the carrier, locate the release handle at the back of the carrier. Squeeze the handle and lift the carrier straight up from the base.

5.5. Travel System Compatibility

The KeyFit 30 infant car seat is compatible with Chicco strollers. Simply attach the carrier to the stroller frame until it clicks securely. Refer to your stroller's manual for specific attachment instructions.

Image: The Chicco KeyFit 30 infant car seat integrated into a travel system with a compatible stroller.

6. Antretyen & Netwayaj

Regular cleaning helps maintain the car seat's condition and hygiene.

• Pati twal: The seat pad and canopy are machine washable. Use cold water on a delicate cycle. Lay flat to dry. Do not use bleach.
• Espageti pou harnais: Spot clean harness straps with a damp cloth and mild soap. Do not machine wash or immerse harness straps in water, as this may weaken them.
• Pati plastik ak metal: Siye pwòp ak anonsamp twal ak savon modere. Pa sèvi ak pwodui netwayaj abrazif oswa solvang.
• Infant Inserts: The head and body support inserts are removable and can be cleaned according to the fabric care instructions.

NAN. Depanaj

If you encounter any issues, please review the following common solutions. For further assistance, contact Chicco Customer Support.

• Syèj machin nan santi l lach apre enstalasyon an: Re-read the installation instructions carefully. Ensure all slack is removed from the LATCH strap or vehicle seat belt. Check the bubble level indicators.
• Harness is Difficult to Tighten/Loosen: Ensure the harness straps are not twisted. Press the harness release button firmly before pulling the tightening strap.
• Carrier Not Clicking into Base: Ensure the base is correctly installed and free of obstructions. Align the carrier properly with the base and press down firmly until an audible click is heard.

8. Espesifikasyon

9. Garanti ak sipò

For warranty information, please refer to the documentation included with your product or visit the official Chicco website. For customer support, product registration, or to purchase replacement parts, please contact Chicco Customer Service.

Chicco Customer Service: chiccousa.com/contact-us/