Manyèl Itilizatè Kontwolè Ekspozisyon LED NovaStar VX600 la

1. Entwodiksyon

The NovaStar VX600 is an integrated all-in-one controller designed for LED display applications. It combines video processing and video control functionalities within a single unit. This device features six Ethernet output ports and supports various operational modes, including video controller, fiber converter, and Bypass mode. A single VX600 unit can manage up to 3.9 million pixels, with maximum output resolutions of 10,240 pixels in width and 8,192 pixels in height, making it suitable for ultra-wide and ultra-high LED screens. The VX600 is capable of receiving diverse video signals and processing high-resolution images, offering features such as stepless output scaling, low latency, and pixel-level brightness and chroma calibration for an optimized display experience. It is compatible with NovaStar's NovaLCT and V-Can software for simplified infield operations, including screen configuration, Ethernet port backup settings, layer management, preset management, and firmware updates.

2. Pwodwi Features

• 6x Gigabit Ethernet Output ports for display connectivity.
• 1x HDMI 1.3 input with loop-through capability.
• 1x DVI input with loop-through capability.
• 1x 3G-SDI input with loop-through capability.
• 1x 10G optical fiber port (OPT1) for high-bandwidth connections.
• Integrated video processing and control.
• Supports up to 3.9 million pixels.
• Maximum output width of 10,240 pixels and height of 8,192 pixels.
• Stepless output scaling.
• Low latency processing.
• Pixel-level brightness and chroma calibration.
• Compatible with NovaLCT and V-Can software for advanced control.

3. Fizik Plis paseview

3.1 Panèl devan

Figure 1: NovaStar VX600 Front Panel

The front panel of the VX600 provides access to the main control interface and status display. Key components include:

• 1. Ekspozisyon ekran: Shows current status, input/output resolutions, and menu options.
• 2. MENU Knob: Yo itilize li pou navige nan meni yo epi ajiste paramèt yo.
• 3. ESC Button: Exits current menu or cancels an operation.
• 4. CONTROL Buttons: Includes MAIN, PIP1, PIP2, and SCALE for picture-in-picture and scaling functions.
• 5. INPUTS Buttons: Selects video input sources such as HDMI1, HDMI2, DVI, SDI, OPT1/2, and MOSAIC.
• 6. FUNCTION Buttons: Provides access to PRESET recall, TEST patterns, FREEZE frame, and a customizable FN button.

3.2 Panèl dèyè

Figure 2: NovaStar VX600 Rear Panel

The rear panel houses all input and output connectors, as well as the power interface:

• Pò USB: For connecting to a computer for control and firmware updates.
• Ethernet Control Port: For network-based control.
• GENLOCK IN/LOOP: For synchronization with external video sources.
• HDMI 1.3 IN & LOOP: Primary HDMI input with a loop-through output.
• DVI IN & LOOP: DVI input with a loop-through output.
• 3G-SDI IN & LOOP: SDI input with a loop-through output.
• OUTPUT Ethernet Ports (1-6): Gigabit Ethernet ports for connecting to LED display receiving cards.
• OPT Ports (1-2): 10G optical fiber ports for high-bandwidth output.
• HDMI 1.3 Output: Dedicated HDMI output.
• Antre pouvwa: AC power connector (100-240V, 50/60Hz).
• ON / OFF switch: Entèriptè prensipal pou pouvwa aparèy la.

4. Enstriksyon Enstalasyon

4.1 Koneksyon pouvwa

1. Ensure the VX600 is placed on a stable, well-ventilated surface.
2. Connect the provided AC power cable to the power input port on the rear panel.
3. Ploge lòt bout kab pouvwa a nan yon priz kouran apwopriye.
4. Do not switch on the device until all other connections are made.

4.2 Koneksyon Antre

1. Connect your video sources (e.g., computer, media player, camera) to the desired input ports on the rear panel (HDMI IN, DVI IN, 3G-SDI IN).
2. If using multiple VX600 units or external monitoring, utilize the LOOP outputs for signal pass-through.

4.3 Koneksyon Sòti

1. Connect standard Ethernet cables from the VX600's OUTPUT Ethernet Ports (1-6) to the receiving cards of your LED display panels.
2. For long-distance or high-bandwidth applications, connect optical fiber cables to the OPT ports.

4.4 Control Connection

1. For initial configuration and advanced control, connect a computer to the VX600 via the USB port or the Ethernet Control port on the rear panel.
2. Install the NovaLCT or V-Can software on your computer.

5. Operasyon Enstriksyon

5.1 Power On/Off

After all connections are secure, flip the ON/OFF switch on the rear panel to power on the VX600. The front panel display will illuminate, indicating the device is starting up. To power off, flip the switch back to the OFF position.

5.2 Navigasyon debaz ak seleksyon antre

1. Sèvi ak la MENU Knob on the front panel to navigate through the on-screen menus. Press the knob to confirm selections.
2. Peze a ESC bouton to go back to the previous menu or exit the current menu.
3. To select a video input source, press the corresponding button in the ENTRÈ section (e.g., HDMI1, DVI). The active input will be displayed on the screen.

5.3 Screen Configuration (Using Software)

For detailed screen setup, including resolution, mapping, and calibration, use the NovaLCT or V-Can software on a connected computer. Refer to the software's dedicated manual for comprehensive instructions on:

• Sending card configuration.
• Receiving card mapping.
• Brightness and color adjustment.
• Pixel-level calibration.

5.4 Layer Management and Presets

• Sèvi ak la KONTWÒL buttons (MAIN, PIP1, PIP2, SCALE) to manage display layers and adjust scaling directly from the front panel.
• La PRESET button allows you to save and recall frequently used screen configurations.

6. Antretyen

• Netwayaj: Regularly clean the exterior of the device with a soft, dry cloth. Avoid using liquid cleaners directly on the unit.
• Vantilasyon: Asire w ke ouvèti vantilasyon yo vid epi pa bouche pou anpeche surchof.
• Jesyon kab: Periodically check all cable connections for security and integrity. Loose connections can lead to signal loss or instability.
• Mizajou mikrolojisyèl: Check the NovaStar official website for the latest firmware updates. Apply updates as recommended to ensure optimal performance and access to new features.

NAN. Depanaj

7.1 No Display on LED Screen

• Tcheke pouvwa: Ensure the VX600 is powered on and the power cable is securely connected.
• Verifye sous Antre: Confirm the correct input source is selected on the front panel.
• Inspect Output Connections: Ensure Ethernet cables from the VX600 to the LED display are properly connected.
• Konfigirasyon ekran: Use NovaLCT/V-Can software to verify the screen configuration and mapping are correct for your LED display.

7.2 Image Distortion or Flickering

• Input Signal Quality: Check the quality of the input video signal. Try a different source or cable.
• Entegrite kab: Replace any damaged or excessively long video or Ethernet cables.
• Resolution and Scaling: Ensure the input resolution is supported and scaling settings are correctly configured in the VX600 or via software.
• Pousantaj rafrechisman: Verify the refresh rate settings are compatible with your LED display.

7.3 Control Software Not Connecting

• Koneksyon USB/Etènèt: Ensure the USB or Ethernet control cable is securely connected between the computer and the VX600.
• Enstalasyon chofè: Verify that the necessary drivers for the VX600 are installed on your computer.
• Version lojisyèl: Use the latest version of NovaLCT or V-Can software.
• Anviwònman rezo: If using Ethernet control, ensure your computer's network settings (IP address) are compatible with the VX600's default or configured settings.

8. Espesifikasyon

9. Garanti ak sipò

For warranty information, technical support, or service inquiries regarding your NovaStar VX600 LED Display Controller, please refer to the official NovaStar website or contact your authorized NovaStar dealer. Keep your purchase receipt as proof of purchase for warranty claims. Support resources typically include online documentation, FAQs, and direct contact options for technical assistance.