RecPro RP-2093-W

RecPro RV Solar Ventilation Fan

Model: RP-2093-W | Brand: RecPro

Entwodiksyon

The RecPro RV Solar Ventilation Fan is designed to provide efficient ventilation for recreational vehicles, marine applications, campers, sheds, and trailers. This fan operates primarily using solar power, offering a convenient and energy-efficient solution for air circulation. It helps to reduce heat buildup and improve air quality within enclosed spaces.

Enfòmasyon sou Sekirite

Kontni pake

Verifye ke tout bagay yo prezan anvan ou kòmanse enstalasyon an:

Espesifikasyon

MakRecPro
Nimewo ModèlRP-2093-W
KoulèBlan
Sous pouvwaSolè Powered
Wattage7 wat
Voltage12 Vòlt (DC)
Kantite lam3
Longè lam7 pous
Dimansyon pwodwi7 x 5.5 x 3.63 pous
Pwa atik13.7 ons
Chanje KalitePouse bouton
Kantite Nivo Pouvwa3

Enstalasyon ak Enstalasyon

This solar ventilation fan is designed for outdoor use and requires direct sunlight for operation. It is compatible with ventilation holes up to 5-1/4 inches. Professional installation is recommended for optimal performance and safety.

  1. Chwazi Kote: Select a mounting location on your RV, marine vessel, camper, shed, or trailer that receives ample direct sunlight throughout the day. Ensure the surface is flat and clear of obstructions.
  2. Prepare Ouvèti a: If a ventilation hole does not exist, carefully cut a circular opening of approximately 5-1/4 inches (13.3 cm) in diameter. Ensure the opening is clean and free of debris.
  3. Aplike selan: Apply a suitable RV-grade sealant (not included) around the perimeter of the opening on the exterior surface to create a watertight seal. This step is critical to prevent water leaks.
  4. Position Fan Unit: Place the fan unit into the prepared opening, ensuring the solar panel faces upwards towards the sky. Align the pre-drilled mounting holes on the fan's base with the mounting surface.
  5. Vantilatè an sekirite: Use the provided mounting screws to securely fasten the fan unit to the surface. Do not overtighten the screws.
  6. Final Seal: Apply an additional bead of sealant over the screw heads and around the base of the fan unit to ensure a complete watertight seal.
RecPro RV Solar Ventilation Fan, white unit with solar panel and fan components

Figure 1: RecPro RV Solar Ventilation Fan (White) showing both the top solar panel unit and the bottom fan unit.

Diagram showing dimensions of the RecPro Solar Powered Ceiling Vent with Fan

Figure 2: Dimensional diagram for the RecPro Solar Powered Ceiling Vent with Fan, indicating a 5½" top diameter and 7" bottom diameter for the fan unit, and a height of 3⅜".

Enstriksyon Operasyon

The RecPro RV Solar Ventilation Fan is designed for simple operation. Its primary power source is the integrated solar panel.

Anba view of the RecPro RV Solar Ventilation Fan showing the fan blades and internal components

Figi 3: Anba view of the fan unit, showing the fan blades and the location of the push button switch (not explicitly visible but implied by design).

Antretyen

Regular maintenance ensures the longevity and optimal performance of your solar ventilation fan.

Top view of the RecPro RV Solar Ventilation Fan showing the solar panel

Figi 4: Top view of the fan unit, highlighting the solar panel for cleaning and inspection.

Depanaj

PwoblèmKòz posibSolisyon
Fan not spinning or very slow.Insufficient direct sunlight.
Panèl solè a sal oswa bouche.
Fan blades are obstructed.
Ensure the fan is in direct sunlight.
Netwaye sifas panèl solè a.
Remove any obstructions from the fan blades.
Low koule lè.Ensifizan limyè solèy la.
Fan is set to a lower power level.
Airflow path is obstructed.
Relocate to a sunnier spot or wait for stronger sunlight.
Press the push button switch to cycle to a higher power level.
Clear any obstructions from the intake or exhaust path.
Bri dwòl pandan operasyon an.Konpozan ki lach.
Debris in fan mechanism.
Damaged fan blades.
Check all mounting screws for tightness.
Carefully inspect and remove any debris.
If blades are damaged, contact customer support for replacement options.
Water leakage around the unit.Improperly sealed installation.
Deteriorated sealant.
Inspect and reapply RV-grade sealant around the entire unit, especially at the base and screw points.

Enfòmasyon sou Garanti

RecPro products are manufactured to high-quality standards. For specific warranty details, including coverage period and terms, please refer to the warranty card included with your purchase or visit the official RecPro websit la. Kenbe prèv acha ou pou reklamasyon garanti.

Sipò pou Kliyan

If you have any questions, require technical assistance, or need to report an issue with your RecPro RV Solar Ventilation Fan, please contact RecPro customer support:

Please have your model number (RP-2093-W) and purchase date available when contacting support.

Dokiman ki gen rapò - RP-2093-W

Preview Manyèl Itilizatè Frijidè RECPRO 6.3 pye kib pou RV ki mache ak gaz ak elektrik RP-2165 RP-2166
Manyèl itilizatè ak gid enstalasyon pou frijidè RV RECPRO 6.3 pye kib ki mache ak gaz ak elektrik, modèl RP-2165 ak RP-2166. Li kouvri enstalasyon, operasyon, depanaj, ak espesifikasyon teknik.
Preview PurePro® PROK-320 Single Handle Kitchen Faucet Installation Guide
Official installation guide for the PurePro® PROK-320 single handle kitchen faucet. Includes tools required, cleaning instructions, important warnings, step-by-step installation procedures, and a detailed parts breakdown.
Preview Manyèl Itilizatè Klipsch Reference Premiere Series - Enstalasyon, Plasman, ak Koneksyon
Manyèl itilizatè konplè pou oratè Klipsch Reference Premiere Series, ki kouvri konfigirasyon, plasman nan chanm nan, gid koneksyon, entegrasyon Dolby Atmos, antretyen, ak anrejistreman pwodwi. Gen ladan detay modèl pou RP-8060FA, RP-8000F, RP-6000F, RP-5000F, RP-4000F, RP-600M, RP-500M, RP-400M, RP-502S, RP-402S, RP-500SA, RP-504C, RP-404C, RP-600C, RP-500C, RP-400C, ak RP-160M.
Preview Manyèl Itilizatè Oratè Klipsch Reference Premiere yo
Manyèl itilizatè pou oratè Klipsch Reference Premiere, ki kouvri enfòmasyon sou konfigirasyon, plasman, koneksyon, antretyen, ak garanti. Li gen ladan espesifikasyon detaye ak dyagram pou plizyè modèl tankou RP-8060FA, RP-8000F, RP-6000F, RP-5000F, RP-4000F, RP-600M, RP-500M, RP-400M, RP-502S, RP-402S, RP-500SA, RP-504C, RP-404C, RP-600C, RP-500C, ak RP-400C.
Preview Gid Detay ak Asanblaj Pyès Robine PurePro PROL-250
Detay sou pati yo ak detay eksploze yo view Deskripsyon pou wobinèt PurePro PROL-250 la, ki gen ladan nimewo pyès yo, deskripsyon yo, ak enfòmasyon pou kontakte sèvis kliyan nan men FW Webb Konpayi.