KAIWEETS KT360A Laser Level Instruction Manual

1. Enfòmasyon enpòtan sou sekirite

Please read and understand all safety instructions before operating this device. Failure to follow these instructions may result in laser radiation exposure or other hazards.

• Sekirite lazè: Do not point the laser directly into eyes. This product is a Class II laser device, with output power less than 1mW.
• Evite ekspoze je dirèk nan reyon lazè a.
• Pa demonte aparèy la. Se sèlman pèsonèl otorize ki dwe fè reparasyon yo.
• Kenbe aparèy la pa rive nan men timoun yo.

2. Pwodwi souview

The KAIWEETS KT360A is a 3x360 green line laser level designed for precise leveling and alignment tasks. It features high visibility green laser lines and self-leveling capabilities, making it suitable for various indoor and outdoor applications.

Image: The KAIWEETS KT360A laser level emitting bright green 360-degree lines.

Karakteristik kle:

• 3 x 360° Green Laser Lines: One horizontal and two vertical lines provide full room coverage for floors, walls, and ceilings.
• Segondè Vizibilite: Green laser technology offers 4 times better visibility compared to red lasers.
• Self-Leveling Function: Automatically levels within ±4° range.
• Mode batman kè: Allows use with a laser detector (not included) for extended range up to 196ft/60m in bright conditions.
• Individual Line Control: Laser lines can be switched on and off independently.
• Pwodwi pou Telefòn enkli: Comes with a small adapter for fine adjustment and a telescopic tripod for versatile placement.

3. Pake kontni

Verifye ke tout atik yo prezan nan pakè ou a:

• KAIWEETS KT360A Laser Level
• Small Adapter (for fine adjustment)
• Telescopic Tripod (Max height 3.7m/12.18ft)
• Mounting Bracket with 1/4"-20 Mounting Thread and 5/8"-11 Thread Adapter (part of tripod kit)
• Manyèl Itilizatè (dokiman sa a)

Image: Complete KAIWEETS KT360A kit, showing the laser level, adapter, and tripod components.

4. Enstalasyon

4.1 Installing the Laser Level

1. Ensure the laser level is placed on a stable, level surface or mounted securely.
2. The device can be mounted onto a tripod using its standard mounting thread.
3. For fine adjustments, attach the laser level to the provided adapter.

Image: Demonstrates multiple ways of placing the laser level, including on a magnetic bracket and a tripod.

4.2 Asanblaj Tripod la

1. Unfold the tripod legs and extend them to the desired height.
2. Assemble the telescopic pole sections if using the full height.
3. Attach the mounting bracket to the top of the pole.
4. Secure the laser level to the mounting bracket using the 1/4"-20 thread. Use the 5/8"-11 thread adapter if necessary.

Image: The telescopic tripod components, including pole sections, base, and mounting bracket.

Image: The KAIWEETS KT360A laser level mounted on the telescopic tripod, projecting horizontal and vertical lines on a wall.

4.3 Using the Adapter for Fine Adjustment

The small adapter allows for precise positioning of the laser level.

• Attach the laser level to the adapter.
• Use the micro knob on the adapter to rotate the laser level 360° clockwise or counterclockwise for horizontal alignment.
• The adapter also provides X-axis and Y-axis adjustments for fine-tuning the laser line position within a 1 cm range.

Image: The small adapter for the laser level, showing its robust construction and adjustment knobs.

Image: The laser level mounted on the adapter, illustrating its 360-degree rotation, X-axis, and Y-axis fine adjustment capabilities.

5. Operasyon Enstriksyon

5.1 Limen/Etenn ak Seleksyon Mòd

1. Pouvwa sou: Slide the main switch to the "ON" position. The laser level will automatically enter self-leveling mode.
2. Mòd oto-nivelman: When the pendulum is unlocked, the device will self-level. If the tilt angle exceeds 4°, the laser lines will flash rapidly to indicate an out-of-level condition.
3. Manual Mode (Slope Mode): To use the device at an angle, lock the pendulum by sliding the main switch to the "OFF" position while the device is on. The laser lines will remain active but will not self-level, allowing for angled projections.
4. Switching Laser Lines: Press the dedicated buttons on the control panel to cycle through horizontal and vertical laser lines independently.
5. Mode batman kè: Activate pulse mode for use with a laser detector in bright outdoor conditions. Refer to the device's specific button for pulse mode activation.
6. Pouvwa Off: Slide the main switch to the "OFF" position to lock the pendulum and power off the device.

Image: The laser level in operation, projecting a horizontal line and two vertical lines, creating a 90-degree cross-section on the wall and floor.

6. Antretyen

• Netwayaj: Keep the laser level clean. Use a soft, damp twal pou siye deyò a. Pa sèvi ak pwodui netwayaj abrazif oswa solvan.
• Swen Lantiy: Gently clean the laser output windows with a soft, lint-free cloth. Avoid scratching the lenses.
• Depo: Store the device in its original carrying case in a dry, dust-free environment when not in use.
• Batri: If the device uses removable batteries, remove them during long periods of storage to prevent leakage.
• Kalibrasyon: Regular calibration checks are recommended to ensure accuracy, especially after drops or impacts.

NAN. Depanaj

8. Espesifikasyon

• Modèl: KT360A
• Klas lazè: Klas II, <1mW
• Laser Color: Vèt
• Liy lazè: 3 x 360° (1 Horizontal, 2 Vertical)
• Self-nivelman Range: ± 4°
• Pulse Mode Range: Up to 196ft/60m (with detector, not included)
• Tripod Max Height: 3.7m / 12.18ft
• Ajisteman adaptè: 360° rotation, X/Y axis fine adjustment (within 1 cm)

9. Garanti ak sipò

KAIWEETS bay yon Sèvis apre-lavant 3 ane for the KT360A laser level kit.

For technical support, warranty claims, or any questions regarding your product, please contact KAIWEETS customer service through their official channels or the retailer where the product was purchased.

Please have your model number (KT360A) and purchase information ready when contacting support.