1. Enfòmasyon sou Sekirite
Please read and understand all instructions before attempting to install, operate, or maintain this product. Failure to follow these instructions may result in electric shock, fire, property damage, or personal injury.
- Toujou dekonekte kouran an nan panèl sèvis la anvan ou travay sou vantilatè a.
- All wiring must comply with local electrical codes and standards.
- This fan is suitable for use over a bathtub or shower when connected to a GFCI (Ground Fault Circuit Interrupter) protected branch circuit.
- Do not use this fan with any solid-state speed control device unless specifically approved.
- Asire bon baz pou anpeche chòk elektrik.
- Mete linèt sekirite ak gan pandan enstalasyon an.
2. Pwodwi souview
The Akicon BPT14-80CL Bathroom Exhaust Fan with Light is designed to provide efficient ventilation and illumination for your bathroom. It features an ultra-quiet operation and a selectable LED light to enhance comfort and functionality.
Karakteristik kle:
- Konstriksyon kalite siperyè: Features a black-coated galvanized steel casing and a durable copper ball-bearing motor for long-lasting performance.
- Operasyon trankil: Operates at a low noise level of 2.0 sones, effectively removing odors and humidity from spaces up to 80 square feet.
- Ekleraj ki ap dirije enèji ki efikas: Includes selectable LED lights with color temperatures of 3000K, 4000K, and 5000K, providing ample brightness for your bathroom. The fan and light can be wired to operate jointly or separately.
- Enstalasyon fasil: Designed for straightforward installation or replacement, even without attic access.
Image: Akicon Bathroom Exhaust Fan highlighting key features.
3. Espesifikasyon
| Karakteristik | Detay |
|---|---|
| Mak | Akicon |
| Non modèl | BPT14-80CL |
| Koulè | Lwil oliv fwote an kwiv |
| Konsepsyon fanatik elektrik | Fanatik echapman |
| Sous pouvwa | AC |
| Style | Modèn |
| Dimansyon pwodwi | 13"D x 13"W x 7.75"H |
| Kalite chanm | Twalèt |
| Karakteristik espesyal | Dirije limyè |
| Itilizasyon Rekòmande | Sikilasyon lè |
| Nivo bri | 2 son |
| Wattage | 27.6 wat |
| Fini Kalite | Lwil oliv fwote |
| Kapasite Flow Air | 80 pye kib pou chak minit (CFM) |
| Vitès | 1 RPM |
| Chanje Kalite | Pouse bouton |
| Konpozan ki enkli | Twous limyè |
| Itilizasyon Andedan kay la / Deyò | Andedan kay la |
| Espesifikasyon Met | HVI, UL |
| Metòd kontwòl | Remote (if applicable, check product details) |
| Efikasite | Segondè |
| Èske san fil? | Non |
| Kantite Nivo Pouvwa | 1 |
| Kalite motè | Copper Ball-Bearing Motor |
| Kalite enstalasyon | Brikoleur |
| Pwa atik | 12.2 liv |
| Kalite aliye | Mòn plafon |
Image: Detailed specifications including airflow, sound level, and light temperature options.
4. Enstalasyon
This section provides detailed instructions for installing your Akicon bathroom exhaust fan. Ensure you have all necessary tools and safety equipment before beginning.
Tcheke anvan enstalasyon:
- Verify that your soffit or attic has sufficient space for the fan housing.
- Housing Dimensions: 8-1/2" x 8-1/2" x 5-3/4".
- Light Cover Diameter: 13 inches.
- Ceiling Opening Size: 9" x 9".
Image: Installation dimensions and requirements.
Image: Technical dimensions of the fan unit.
Installation Steps (with attic access):
- Prepare Ouvèti a: Starting next to a joist, trace an outline for the housing. Use a drywall saw to cut the opening to the required size (9"x9").
- Lojman an sekirite: Screw the fan housing into the joists using appropriate fasteners.
- Konekte kanalizasyon yo: Attach the ventilation duct to the fan's duct connector. Apply HVAC tape over the connection to ensure an airtight seal.
- Fil elektrik: Connect the house wires to the fan wires. Remember to connect black to black, white to white, and ground to ground. Place insulation over and around the fan housing.
- Koneksyon limyè: Plug in the light connection cable.
- Enstale griyaj la ak limyè a: Install the grille, screw in the LED bulbs, and then attach the glass cover.
Installation Steps (no attic access):
If attic access is not available, this model allows for installation from below the ceiling.
- Remove Motor: Disconnect the wires connecting the motor to the housing. Remove the fixing screws on the outside of the housing to detach the motor assembly.
- Mete Lojman: After connecting the ventilation duct, send the housing into the ceiling opening.
- Lojman an sekirite: Secure the housing to the joist from below the ceiling using appropriate screws.
- Konekte fil yo: Connect the wires correctly according to the label on the wires.
- Reinstall Motor: Reinstall the motor back into the housing and connect the plugs.
- Enstale griyaj la ak limyè a: Install the grille, screw in the LED bulbs, and then attach the glass cover.
Enstalasyon Videyo:
Video: Step-by-step installation guide for the Akicon Bathroom Exhaust Fan with Light (Model OH1480).
5. Operasyon Enstriksyon
The Akicon BPT14-80CL fan and light can be operated independently or together, depending on how they were wired during installation.
- Operasyon Fan: Use the designated wall switch to turn the exhaust fan ON or OFF. The fan will remove moisture and odors from the room.
- Limyè operasyon: Use the designated wall switch to turn the LED light ON or OFF.
- Seleksyon Tanperati Koulè: The LED light offers three selectable color temperatures: 3000K (Warm White), 4000K (Cool White), and 5000K (Daylight). To change the color temperature, locate the toggle switch on the fan housing (typically accessible by removing the glass cover) and slide it to your desired setting.
6. Antretyen
Antretyen regilye asire pèfòmans optimal ak lonjevite fanatik echapman ou an.
Netwayaj:
- Dekonekte pouvwa: Toujou etenn kouran an nan disjonktè a anvan ou netwaye.
- Remove Grille and Cover: Carefully remove the glass cover and the decorative grille.
- Konpozan pwòp: Wash the grille and glass cover with mild soap and water. Wipe the fan blades and interior of the housing with a damp twal. Asire w tout pyès yo byen sèk anvan ou reasanble yo.
- Remonte: Reattach the grille and glass cover.
Ranplasman anpoul:
The LED bulbs in this unit are user-replaceable.
- Dekonekte pouvwa: Fèmen kouran nan disjoncteurs a.
- Remove Glass Cover: Gently twist and remove the glass cover.
- Ranplase anpoul: Unscrew the old bulbs and screw in new compatible LED bulbs.
- Re-enstale kouvèti a: Reattach the glass cover by twisting it back into place.
Image: Illustration of LED bulb and panel types, relevant for bulb replacement.
NAN. Depanaj
If you encounter issues with your Akicon exhaust fan, refer to the following common problems and solutions:
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Fanatik pa fonksyone | Pa gen pouvwa nan inite a Koneksyon fil elektrik ki lach Motè fonksyone byen | Tcheke disjonktè a ak switch miray la. Verifye tout koneksyon fil yo byen fèm (asire w ke kouran an koupe anvan). Kontakte sèvis kliyan si motè a gen pwoblèm. |
| Limyè pa limen | Anpoul ki lach Anpoul boule Koneksyon fil elektrik ki lach | Ensure bulbs are screwed in tightly. Ranplase anpoul yo. Verify light connection plug and wiring (ensure power is off first). |
| Twòp bri pandan operasyon an | Vis aliye ki lach Obstruction nan lam fanatik yo Pwoblèm motè | Sere boulon aliye vis. Turn off power and remove any debris from fan blades. Contact customer support if noise persists after checking. |
| Limyè flickers | Koneksyon anpoul ki lach Anpoul defo Pwoblèm fil elektrik | Ensure bulbs are screwed in tightly. Ranplase anpoul yo. Tcheke koneksyon fil yo (asire w ke kouran an koupe anvan). |
8. Garanti ak sipò
The Akicon BPT14-80CL Bathroom Exhaust Fan comes with a 3-ane garanti bon jan kalite. It is HVI-certified and UL listed for installation over showers and tubs with GFCI protection.
For any questions, problems, or missing parts, please contact Akicon Customer Service. Our service hours are 8 a.m. to 6 p.m. EST, Monday-Friday.
You can reach Akicon Customer Service through the seller 'Office&Home Improvement' on Amazon or via the contact information provided with your product packaging.
