EGLO connect.z Turcona-Z Smart LED Ceiling Panel User Manual

1. Entwodiksyon

Thank you for choosing the EGLO connect.z Turcona-Z Smart LED Ceiling Panel. This intelligent lighting fixture offers a wide range of features, including tunable white light (warm to cool), RGB color options, and dimming capabilities. Control is seamless via the AwoX app, an optional connect.z remote, or voice commands through compatible smart home systems like Amazon Alexa and Google Nest using ZigBee 3.0 technology.

Image 1.1: The EGLO connect.z Turcona-Z Smart LED Ceiling Panel.

2. Enfòmasyon sou Sekirite

Please read these safety instructions carefully before installation and use. Failure to follow these instructions may result in electric shock, fire, or other hazards.

• Sekirite elektrik: Always disconnect power at the main circuit breaker before installing, cleaning, or servicing the fixture. Installation should be performed by a qualified electrician if you are unsure.
• Itilize andedan kay la sèlman: This product is rated IP20, meaning it is protected against solid objects larger than 12.5mm but has no protection against water. Do not use in wet or damp kote yo ye.
• Voltage: Asire rezèv la voltage matches the fixture's requirements (230 Volts).
• Chalè: Do not cover the fixture or place it near heat sources.
• Netwayaj: Sèvi ak yon twal mou epi sèk pou netwaye. Pa sèvi ak pwodui netwayaj abrazif oswa solvan.
• LED ki pa ka ranplase: The LED light source in this luminaire is not replaceable. When the light source reaches its end of life, the entire luminaire shall be replaced.

3. Pake kontni

Verifye ke tout konpozan yo prezan epi yo pa domaje:

• 1x EGLO connect.z Turcona-Z Smart LED Ceiling Panel (Model 900062)
• Montaj pyès ki nan konpitè (vis, lank)
• Manyèl Enstriksyon

4. Enstalasyon

Follow these steps for proper installation. If you are not confident in performing electrical work, consult a qualified electrician.

1. Dekonekte pouvwa: Fèmen elektrisite nan disjoncteurs prensipal la anvan ou kòmanse enstalasyon an.
2. Prepare Sifas Montage: Choose a suitable location on the ceiling. Use the mounting bracket as a template to mark the drilling points.
3. Enstale Support Mounting: Drill holes at the marked points and insert appropriate wall anchors (if necessary). Secure the mounting bracket to the ceiling using the provided screws.
4. Koneksyon fil elektrik: Connect the household electrical wires to the fixture's wires. Ensure correct polarity (Live to Live, Neutral to Neutral, Ground to Ground). Use appropriate wire connectors.
5. Tache aparèy: Carefully align the LED panel with the mounting bracket and secure it in place. Ensure all connections are firm and the fixture is stable.
6. Retabli pouvwa: Once the fixture is securely mounted and wired, restore power at the circuit breaker.

Imaj 4.1: View of the mounting mechanism and internal components.

Image 4.2: Product dimensions: 120 cm (47.24 inch) length, 10 cm (3.94 inch) width, 7.5 cm (2.95 inch) height.

5. Initial Setup and Smart Home Integration

The EGLO connect.z Turcona-Z offers flexible control options.

5.1. AwoX App Control (Bluetooth)

1. Telechaje App: Download the 'AwoX Smart CONTROL' app from your smartphone's app store (iOS or Android).
2. Pèmèt Bluetooth: Asire w ke Bluetooth aktive sou smartphone ou.
3. Pè aparèy: Open the AwoX app and follow the on-screen instructions to add a new device. The app will detect your EGLO connect.z light.
4. Kontwòl: Once paired, you can control the light's functions directly from the app.

5.2. ZigBee 3.0 Smart Home Integration (Voice Control)

For voice control via Amazon Alexa or Google Nest, a compatible smart home hub with integrated ZigBee bridge is required.

1. Ensure Hub Compatibility: Verify your smart home hub (e.g., Amazon Echo 4th Gen, Google Nest Hub) supports ZigBee 3.0. For older Echo devices (1st-3rd Gen) or Echo Show models, an additional WiFi + Zigbee Gateway might be necessary.
2. Mòd Dekouvèt: Put your smart home hub into device discovery mode (refer to your hub's instructions).
3. Power Cycle Light: Turn the EGLO connect.z light off and on at the wall switch to initiate pairing mode.
4. Peyaj: The hub should detect and add the light. You can then assign it to a room or group.

Image 5.1: Voice control is possible with compatible voice assistants like Alexa and Google Nest.

Image 5.2: Compatibility chart for Alexa and Google Home. Some devices may require an additional Zigbee Gateway.

5.3. Optional connect.z Remote Control

An EGLO connect.z remote control (EGLO 99099) can be purchased separately for direct control without a smartphone or voice assistant.

Image 5.3: The optional EGLO connect.z remote control (EGLO 99099).

6. Operasyon Enstriksyon

The EGLO connect.z Turcona-Z offers a variety of functions accessible through the AwoX app or compatible smart home systems.

6.1. Basic Functions (App/Remote/Voice)

• On/Off: Limen oswa etenn limyè a.
• Dimming: Adjust the brightness level from 1% to 100%.
• Tanperati koulè: Change the white light from warm white (2700K) to neutral white to cool white (6500K).
• Koulè RGB: Select from millions of colors to create different moods.

Image 6.1: The panel providing warm white illumination.

Image 6.2: The panel providing cool white illumination.

Image 6.3: The panel displaying vibrant RGB colors.

6.2. Advanced App Functions

The AwoX app unlocks additional smart features:

• Revèy: Schedule the light to turn on or off at specific times.
• Twilight Simulation: Gradually dim the light to simulate sunset.
• Limyè lannwit: Set a very low brightness for subtle illumination.
• Favoris: Save your preferred light settings (brightness, color, color temperature) for quick access.
• Gwoupman: Control multiple EGLO connect.z lights simultaneously by grouping them in the app.
• Limyè Alam: Use the light to gently wake you up by gradually increasing klète.
• Presence Simulation: Mimic occupancy by turning lights on and off randomly when you are away.
• Disco Function: Synchronize light changes with music or create dynamic color effects.

Imaj 6.4: Plis paseview of app functions including Timer, RGB, Dimming, Save Favorites, Color Temperature, Save Light Groups, Twilight Simulation, Night Light, Disco Function, Light Alarm, and Presence Simulation.

7. Antretyen

The EGLO connect.z Turcona-Z LED panel requires minimal maintenance.

• Netwayaj: Asire w ke kouran an koupe anvan ou netwaye li. Siye aparèy la avèk yon twal mou, sèk oswa yon ti kras mouye.amp cloth. Do not use harsh chemicals, abrasive cleaners, or sprays directly on the light.
• Dirije lavi: The integrated LED light source has an average lifespan of 20,000 hours and is not user-replaceable.

NAN. Depanaj

If you encounter issues with your EGLO connect.z Turcona-Z, refer to the following common problems and solutions:

9. Espesifikasyon

10. Garanti ak sipò

For warranty information and customer support, please refer to the documentation provided with your purchase or visit the official EGLO websit la. Kenbe prèv acha ou a pou nenpòt reklamasyon garanti.