Entwodiksyon
This manual provides essential information for the safe and effective use of the OEMTOOLS 25300 22mm Crank Bolt Socket. Please read these instructions thoroughly before operation to ensure proper usage and to prevent potential damage or injury.
Enfòmasyon sou Sekirite
AVÈTISMAN: Always wear appropriate personal protective equipment, including safety glasses, when using this tool. Failure to do so may result in serious injury.
- Ensure the socket size matches the fastener size (22mm) to prevent stripping or damage.
- Use only with a 1/2 inch drive impact wrench or breaker bar.
- Do not exceed the recommended torque specifications for the fastener being removed or installed.
- Kenbe men ak rad lwen pati k ap deplase yo pandan w ap opere.
- Store the tool in a dry, secure location away from children.
Image: The OEMTOOLS 25300 22mm Crank Bolt Socket, highlighting the importance of using it only on 22mm harmonic balancer bolts to prevent damage or injury.
Pwodwi souview
The OEMTOOLS 25300 is a heavy-duty 22mm crank bolt socket designed for removing stubborn harmonic balancer bolts. Its construction and design features contribute to its effectiveness:
- Materyèl: Constructed from durable Chrome Molybdenum Steel.
- Gwosè kondwi: 1/2 inch drive for compatibility with standard impact wrenches.
- Konsepsyon: Deep, counterweighted design with 6 points of contact for increased torque and reduced risk of rounding fasteners.
- Gwosè: 22mm metric size, clearly marked on the socket.
Imaj: Yon gwo plan view of the OEMTOOLS 25300 22mm Crank Bolt Socket, showing its robust construction and clear size markings.
Enstalasyon
- Inspect the Tool: Before each use, inspect the socket for any signs of damage, cracks, or wear. Do not use a damaged tool.
- Verify Fastener Size: Confirm that the crank bolt you intend to remove is a 22mm fastener. Using an incorrect size can damage both the fastener and the socket.
- Select Power Tool: Attach the 22mm crank bolt socket to a 1/2 inch drive impact wrench or a suitable breaker bar. Ensure a secure connection.
Image: The OEMTOOLS 25300 22mm Crank Bolt Socket being securely attached to a 1/2 inch drive impact wrench, demonstrating proper tool setup.
Enstriksyon Operasyon
This socket is designed to provide increased torque for removing stubborn crank bolts, particularly harmonic balancer bolts.
- Mete priz la an pozisyon: Carefully place the 22mm socket onto the crank bolt, ensuring it is fully seated and engaged with all six points of the fastener.
- Aplike fòs:
- With Impact Wrench: Activate the impact wrench in the loosening (counter-clockwise) direction. Apply steady pressure. The weighted design of the socket assists in breaking loose stubborn bolts.
- With Breaker Bar: Aplike yon ogmantasyon fiksasing force to the breaker bar in the loosening direction. Avoid sudden jerking motions.
- Remove Bolt: Once the bolt begins to loosen, continue to rotate until it can be removed by hand or with less force.
- Installation (if applicable): For installation, reverse the process. Ensure the bolt is threaded correctly by hand before using the tool. Tighten to the manufacturer's specified torque using a torque wrench.
Image: A mechanic utilizing the OEMTOOLS 25300 22mm Crank Bolt Socket with an impact wrench to remove a crank bolt from a vehicle's engine, illustrating the tool in action.
Antretyen
- Netwayaj: After each use, wipe the socket clean of any grease, dirt, or debris. A mild solvent can be used if necessary, followed by thorough drying.
- Lubrifikasyon: No specific lubrication is required for the socket itself.
- Depo: Store the socket in a dry environment to prevent rust. Keep it organized with other tools to prevent loss and ensure easy access.
- Enspeksyon: Regularly inspect the socket for any signs of wear, such as rounded edges on the hex opening or cracks in the material. Replace the socket if any damage is observed.
Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Socket slips or rounds fastener | Incorrect socket size; Socket not fully seated; Fastener already damaged. | Ensure correct 22mm size. Fully seat socket. If fastener is damaged, use a specialized extraction tool. |
| Crank bolt remains stuck | Excessive torque on bolt; Rust/corrosion; Insufficient power from impact wrench. | Apply penetrating oil. Use a more powerful impact wrench or a longer breaker bar for increased leverage. Ensure impact wrench is set to maximum power. |
| Socket appears damaged after use | Over-stressing the tool; Manufacturing defect. | Do not exceed tool limits. Contact OEMTOOLS support for warranty claim if defect is suspected. |
Espesifikasyon
- Nimewo Modèl: 25300
- Gwosè: 22mm
- Sistèm kondwi: 1/2 inch drive
- Materyèl: Chrome Molybdenum Steel
- Fini: Chrome-Plated (Black)
- Pwa atik: Apeprè 1.96 liv
- Dimansyon pwodwi: Apeprè 4.5 x 2 x 2 pous
- Gam Fastener Konpatib: 22mm
Image: The OEMTOOLS 25300 22mm Crank Bolt Socket with its dimensions (3-3/4" length, 1-5/8" width) clearly indicated, providing a visual reference for its size.
Enfòmasyon sou Garanti
The OEMTOOLS 25300 22mm Crank Bolt Socket is covered by an OEMTOOLS Limited Lifetime Warranty. For detailed information regarding warranty terms, conditions, and claims procedures, please refer to the official OEMTOOLS websit oswa kontakte depatman sèvis kliyan yo.
Sipò pou Kliyan
For technical assistance, product inquiries, or warranty claims, please contact OEMTOOLS customer support. Visit the official OEMTOOLS websit la pou plis enfòmasyon kontak ak lòt resous.
Resous sou entènèt: www.oemtools.com
