FAAC E045S 790077 Control Board User Manual

1. Entwodiksyon

This manual provides comprehensive instructions for the installation, operation, and maintenance of the FAAC E045S control board, model code 790077. This original FAAC control unit is designed for swing gate automation systems operating on a 230V power supply.

The E045S control board is compatible with various FAAC swing gate motors, including models 402, 422, 415 (230V), 412, 413, and 770N (230V). It features programming via a display and buttons, supports a maximum motor power of 800W, and includes inputs for BUS accessories and SAFECODER safety management. The E045S is fully interchangeable with the E045 model.

It is designed to command one or two operators and integrates with 2easy and OMNIdec technologies, making it compatible with the XF 433XF 868 quick-fit module and external receivers. This flexibility makes it suitable for automating swing gates with ease of installation.

2. Enfòmasyon sou Sekirite

Enstriksyon enpòtan pou sekirite:

Se sèlman pèsonèl kalifye ki dwe fè enstalasyon ak antretyen.
Disconnect power before performing any work on the control board or connected components.
AVÈTISMAN: For continued protection against fire, replace fuses only with the same type and rating. Refer to the "Maintenance" section for specific fuse ratings.
Asire w ke sistèm nan byen konekte atè.
The control unit does not include an external watertight box. Ensure it is installed in a suitable protective enclosure to prevent exposure to moisture and environmental elements.
Adhere to all local electrical codes and regulations during installation.

3. Pwodwi souview

The FAAC E045S control board is a sophisticated electronic circuit designed for reliable gate automation. Below is an image of the control board with key components highlighted.

Figure 1: FAAC E045S Control Board (Model 790077)

This image displays the FAAC E045S control board, a green printed circuit board with various electronic components. Prominently visible are the main transformer, multiple terminal blocks for wiring connections, fuses, and a digital display. The board is designed for 230V gate automation systems.

Konpozan kle:

Transfòmatè: Bay volim nesesè atage conversion for the board's operation. (Visible at the top-center of the board).
Fuses (F1, F2): Overcurrent protection for the circuit. F1 is rated 5A, F2 is rated 0.8AS.
Connectivity Module: Facilitates communication and integration with other systems.
Ekspozisyon dijital: Used for programming and displaying operational status.
Blòk tèminal: Green screw terminals for connecting power (P E N L), motors (1-8), and various accessories and inputs (9-11, 13-14, 15-18, 20-21).
Pò USB: For potential diagnostics or firmware updates.
Radio Module Connection: Indicated by "RADIO" on the board, for connecting wireless receivers.

4. Enstalasyon ak Enstalasyon

Before beginning installation, ensure the main power supply is disconnected. The E045S control board is designed for 230V systems.

4.1. Mounting the Control Board

Mount the control board inside a suitable, protective enclosure. This board does not come with an external watertight box.
Ensure the enclosure provides adequate ventilation and protection from environmental factors (dust, moisture, extreme temperatures).

4.2. Koneksyon elektrik

Refer to the terminal block labels on the board for correct wiring. All connections must be secure to prevent loose contacts.

Table 1: Terminal Block Connections Overview
Blòk Tèminal	Deskripsyon
P E N L	Main Power Supply (Phase, Earth, Neutral, Line) - 230V AC
1-8	Motor Connections (for one or two operators)
9-11, 13-14, 15-18, 20-21	Inputs for accessories (e.g., Open, Open pedestrian, Stop (closed), BUS 2easy, Power + Earth for accessories 24V), and outputs for flashing lights.

Connect the 230V AC main power supply to the P E N L terminals.
Connect the gate motors to terminals 1-8 according to the motor's wiring diagram.
Connect safety devices (photocells, safety edges) to the appropriate safety inputs.
Connect control devices (keypads, push buttons, receivers) to the Open, Open pedestrian, and Stop inputs.
If using BUS 2easy accessories, connect them to the dedicated BUS terminals.
For external receivers, the board is compatible with the XF 433XF 868 quick-fit module.

5. Operasyon Enstriksyon

The FAAC E045S control board features a user-friendly interface for programming and operation.

5.1. Premye Limen

Once all electrical connections are made and verified, restore power to the control board.
The digital display will illuminate, indicating the board is powered.

5.2. Pwogramasyon

Programming is performed via the integrated LED display and push buttons. Detailed programming steps are typically found in the specific programming manual included with the product. Key programming features include:

Paramèt motè: Adjusting opening/closing speeds, force, and pause times.
Safety Device Configuration: Setting up photocells, safety edges, and SAFECODER management.
Aprantisaj kontwòl remote: Pairing new remote controls with the system.
Mòd operasyon: Selecting different operational logics (e.g., automatic closing, step-by-step).

The board supports programming and configuration through Simply Connect connectivity devices, offering advanced setup options.

5.3. Manyèl Operasyon

In case of power failure or system malfunction, most FAAC gate systems allow for manual release of the gate operators. Refer to your specific motor's manual for instructions on how to manually disengage the motor and open/close the gate.

6. Antretyen

Regular maintenance ensures the longevity and reliable operation of your FAAC E045S control board and gate automation system.

6.1. Ranplasman Fuse

If the control board loses power or specific functions cease, check the fuses. Always disconnect the main power supply before inspecting or replacing fuses.

F1 Fuse: Rated 5A. This fuse protects the primary power input.
F2 Fuse: Rated 0.8AS. This fuse protects secondary circuits.
General Protection Fuse: The board also features a 2.5A protection fuse for certain outputs.
Enpòtan: Always replace a blown fuse with a new fuse of the exact same type and rating to prevent fire hazards and damage to the board.

6.2. Enspeksyon jeneral

Periodically inspect the control board for any signs of damage, corrosion, or loose connections.
Ensure the enclosure is sealed and free from dust, insects, or moisture ingress.
Tcheke tout koneksyon fil elektrik pou sere ak entegrite.

NAN. Depanaj

Seksyon sa a bay konsèy pou pwoblèm komen. Pou pwoblèm konplèks, kontakte yon teknisyen kalifye.

Tablo 2: Senaryo depanaj komen
Pwoblèm	Kòz posib	Solisyon
Pòtay la pa reponn a kòmandman yo.	Pa gen kouran, fizib boule, kontwòl remote ki gen pwoblèm, aparèy sekirite a aktive.	Check power supply and fuses. Verify remote control battery. Inspect safety devices (photocells) for obstructions or misalignment.
Pòtay ouvè men li pa fèmen.	Safety device activated, programming error.	Check safety devices. Review programming settings for automatic closing or safety input logic.
Motè yo pa ap deplase.	Motor wiring issue, motor fault, control board fault.	Verify motor connections. If possible, test motors directly (with caution). Consult a technician if the board is suspected to be faulty.
Ekran an montre yon kòd erè.	Defo sistèm espesifik.	Refer to the detailed programming manual for a list of error codes and their corresponding solutions.

8. Espesifikasyon

Technical specifications for the FAAC E045S Control Board (Model 790077):

Nimewo Modèl: 790077
Mak: FAAC
Pwovizyon pou pouvwa: 220-240V AC
Max Motor Power: 800W
Board Max Power Consumption: 4W
Fuse F1 Rating: 5A
Fuse F2 Rating: 0.8 AS
Pwoteksyon Fuzib: 2.5A (for certain outputs)
Pwogramasyon: LED Display and push buttons, Simply Connect compatible
Antre: Open, Open pedestrian, Stop (closed), BUS 2easy, Power + Earth for accessories 24V
Sòti: Flashing light, Motors, 24V accessories power supply
Konpatibilite: FAAC motors 402, 422, 415 (230V), 412, 413, 770N (230V)
Dimansyon (Anbalaj): 20.2 x 14 x 7.3 cm
Pwa (Anbalaj): 380 gram
ASIN: B09DT4J2N8

9. Garanti ak sipò

Enfòmasyon sou garanti:

Warranty terms and conditions for the FAAC E045S control board are typically provided with the product packaging. Please refer to the documentation included in the box for specific warranty details, duration, and coverage.

Sipò teknik:

For technical assistance, troubleshooting beyond this manual, or spare parts inquiries, please contact FAAC customer support or an authorized FAAC service center. Contact information can usually be found on the FAAC official websit oswa nan dokiman an pwodwi.

You may also find additional resources and FAQs on the FAAC websit la oubyen atravè founisè pwodwi ou a.

	Manyèl Enstalasyon ak Operasyon Operatè Pòtay Batan Elektwomekanik FAAC S418 Gid konplè pou Operatè Pòtay Battant Elektwomekanik FAAC S418 la, ki kouvri enstalasyon, operasyon, antretyen, prekosyon sekirite, ak espesifikasyon teknik. Gen ladan detay sou tablo kontwòl E024U a ak akseswa yo.
	FAAC 770 In-Ground Swing Gate Operator: Installation, Control Board, and Maintenance Manual This manual provides comprehensive instructions for the FAAC 770 in-ground swing gate operator, covering installation, safety guidelines, the E024U control board, programming, maintenance, spare parts, and warranty. It details technical specifications and operational logic for automated vehicular swing gates.
	Manyèl Enstalasyon ak Operatè Baryè Batan FAAC S418 Gid konplè pou operatè baryè elektrik FAAC S418 la, ki kouvri enstalasyon, espesifikasyon teknik, prekosyon sekirite, operasyon, antretyen, ak detay sou tablo kontwòl la.
	FAAC 390 Articulated Arm Swing Gate Operator Manual Comprehensive installation, operation, and safety manual for the FAAC 390 Articulated Arm Swing Gate Operator. Includes technical specifications, electrical diagrams, programming details, and maintenance guidelines.
	Manyèl Enstalasyon ak Antretyen Operatè Baryè Balansan FAAC 390 24V ak Bra Atikile Manyèl konplè enstalasyon, operasyon ak antretyen pou Operatè Baryè Balansan Bra Atikile FAAC 390 24V a, ki gen ladan enstriksyon sekirite, espesifikasyon teknik ak depanaj pou tablo kontwòl E024U a.
	FAAC S450H 24V Hydraulic Swing Gate Operator Manual Comprehensive installation and user manual for the FAAC S450H 24V Hydraulic Swing Gate Operator. Includes safety instructions, technical specifications, installation guides, programming, and troubleshooting.