LEXiBOOK Power Puppy Smart Robot Dog DOG01BK Instruction Manual

1. Entwodiksyon

Welcome to the world of the LEXiBOOK Power Puppy, your new interactive robot companion. This manual provides essential information for the safe and effective use of your Power Puppy, including setup, operation, maintenance, and troubleshooting. Please read this manual thoroughly before first use and retain it for future reference.

2. Enfòmasyon sou Sekirite

• Laj rekòmande: Apwopriye pou timoun ki gen laj 3 ane ak plis.
• Sekirite batri: Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries. Remove batteries if the product is not used for an extended period.
• Danje toufe: Small parts may be present. Not suitable for children under 3 years without adult supervision.
• Sipèvizyon: Yo rekòmande sipèvizyon adilt pandan y ap jwe.
• Chaje: Only use the provided USB charging cable for the robot's rechargeable battery. Do not attempt to charge non-rechargeable batteries.

3. Pake kontni

Asire w tout atik yo prezan nan pakè a:

• 1 x LEXiBOOK Power Puppy Smart Robot Dog
• 1 x kontwòl remote
• 1 x Rechargeable Battery (for robot)
• 1 x USB Chaje Kab

Imaj 3.1: The LEXiBOOK Power Puppy robot dog, its remote control, a green rechargeable battery, and a USB charging cable.

4. Enstalasyon

4.1. Charging the Robot's Battery

1. Locate the battery compartment on the Power Puppy.
2. Mete batri a rechargeable nan lòj la.
3. Connect the USB charging cable to the robot and a suitable USB power source (e.g., computer USB port, USB wall adapter).
4. The robot's indicator light will show charging status (refer to product for specific light behavior).
5. Allow approximately 2 hours for a full charge. Disconnect once fully charged.

4.2. Enstale Batri Remote Kontwòl

The remote control requires 2 x AA batteries (not included).

1. Louvri lòj batri a sou do a nan kontwòl remote la.
2. Mete 2 nouvo pil AA, asire w polarite a kòrèk (+/-).
3. Fèmen lòj batri a byen.

Imaj 4.1: The LEXiBOOK Power Puppy robot dog in black with blue accents, accompanied by its black remote control.

5. Operasyon Enstriksyon

5.1. Powering On / Off

• To turn on the Power Puppy, locate the power switch (usually on the underside or back) and slide it to the 'ON' position.
• Pou etenn li, glise switch la nan pozisyon 'OFF'.

5.2. Fonksyon kontwòl Remote

The remote control allows for various commands and interactions. Refer to the diagram below for button layout and functions:

Imaj 5.1: A close-up of the Power Puppy's remote control, highlighting various buttons for different commands and functions.

• Kle direksyon: Control forward, backward, left, and right movement.
• Efè limyè: Activates various light patterns on the robot's eyes and collar.
• Sit Down / Sit Up: Commands the robot to sit or stand.
• Songs / Music: Jwe plizyè kalite melodi mizik.
• Bonjou: Initiates a greeting action.
• Nimewo: The robot barks to count numbers.
• Kontwòl jès: Activates the gesture control mode.
• Pwogram: Enters programming mode (see 5.4).
• Kanpe sou men: Commands the robot to perform a handstand.
• Volim: Ajiste volim son an.
• Angry / Enervated: Triggers an 'angry' or 'enervated' reaction.
• Sispann: Anpeche tout aksyon aktyèl yo.
• Go Down / Get Up: Commands the robot to lower or raise its body.
• Pompe: Commands the robot to perform push-up movements.
• Yoga: Commands the robot to perform a yoga pose.
• Animal Sounds & Guard: Plays animal sounds or activates guard mode.
• Follow-Me: Activates the 'Follow-Me' function (see 5.3).
• Demo: Initiates a demonstration sequence of various tricks.

5.3. Gesture Control and Follow-Me Function

The Power Puppy responds to hand gestures and can follow you.

• Kontwòl jès: Press the 'Gesture Control' button on the remote. The robot will then respond to specific hand movements (e.g., moving forward when a hand is placed in front of it). Experiment with different gestures to discover its reactions.
• Fonksyon swiv mwen: Activate this function via the remote. The Power Puppy will attempt to follow your movements, staying close to you.

5.4. Programming Function

You can program a sequence of movements and actions for your Power Puppy.

1. Press the 'Program' button on the remote control to enter programming mode.
2. Input your desired sequence of commands using the remote control buttons.
3. Press the 'Program' button again to save and execute the sequence. The robot will then perform the programmed actions.

5.5. Karakteristik entèaktif

• Tactile Response: The Power Puppy reacts to caresses on its head, often initiating a dance or other affectionate response.
• Efè son ak limyè: The robot features LED lights in its eyes and on its collar, which illuminate during various actions and expressions. It also produces a variety of sounds, including barking, music, and animal imitations.
• Tricks and Movements: The Power Puppy can perform numerous tricks such as sitting, lying down, begging, doing push-ups, handstands, and yoga poses.

Imaj 5.2: Four images showing the Power Puppy in different poses: lying down, standing on hind legs, sitting, and doing a handstand.

Imaj 5.3: Yon bò view of the LEXiBOOK Power Puppy, showcasing its black body with blue robotic details and wheels for feet.

6. Antretyen

• Netwayaj: Wipe the robot and remote control with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
• Swen batri: Remove batteries from the remote control if it will not be used for an extended period. Fully charge the robot's rechargeable battery before long-term storage.
• Depo: Sere Power Puppy a nan yon kote ki fre epi sèk, lwen limyè solèy dirèk ak tanperati ekstrèm.

NAN. Depanaj

• Robo a pa reponn:
  • Ensure both the robot and remote control are powered on.
  • Check if the robot's rechargeable battery is fully charged.
  • Replace the batteries in the remote control if they are low or depleted.
  • Ensure there are no obstructions between the remote control and the robot.
• Robot Not Moving Correctly:
  • Verify the robot is on a flat, smooth surface.
  • Check for any debris or hair caught in the wheels or joints.
• Batri pa kenbe chaj:
  • Ensure the USB charging cable is properly connected to both the robot and the power source.
  • Eseye yon lòt sous kouran USB.
  • If the issue persists, the rechargeable battery may need replacement. Contact customer support.

8. Espesifikasyon

Imaj 8.1: An image illustrating the approximate dimensions of the Power Puppy robot dog: 28cm height, 25.7cm length, and 16cm width.

9. Garanti

The LEXiBOOK Power Puppy comes with a 2-ane garanti. This product was designed and developed in Europe and manufactured in China. Please retain your proof of purchase for warranty claims.

10. Sipò

For further assistance, technical support, or warranty inquiries, please visit the official LEXiBOOK websit la oubyen kontakte depatman sèvis kliyan yo. Gade anbalaj pwodwi a pou plis enfòmasyon kontak.

• Sipò sou entènèt: Visit the LEXiBOOK Store on Amazon
• Manifakti: Lexibook