Bosch EasyImpact 600 Hammer Drill and X-Line Drill Bit Set User Manual

Entwodiksyon

This manual provides essential information for the safe and effective operation, maintenance, and care of your Bosch EasyImpact 600 Hammer Drill and the accompanying 34-piece X-Line Drill Bit Set. Please read these instructions thoroughly before using the product for the first time. Keep this manual for future reference.

Enstriksyon Sekirite

Always observe general power tool safety warnings and instructions provided with the product. Failure to follow all instructions may result in electric shock, fire, and/or serious injury.

• Sekirite Zòn Travay: Kenbe zòn travay la pwòp epi byen limen. Zòn ki dezòdone oswa ki fè nwa yo ka lakòz aksidan. Pa sèvi ak zouti elektrik nan atmosfè eksplozif, tankou lè gen likid, gaz oswa pousyè ki ka pran dife.
• Sekirite elektrik: Priz zouti elektrik yo dwe koresponn ak priz la. Pa janm modifye priz la nan okenn fason. Pa maltrete kòd la. Kenbe kòd la lwen chalè, lwil, bor byen file, oswa pati k ap deplase.
• Sekirite Pèsonèl: Always wear eye protection. Use hearing protection when operating the drill. Dress properly; avoid loose clothing or jewelry. Secure long hair.
• Itilizasyon ak swen zouti elektrik: Pa fòse zouti elektrik la. Sèvi ak zouti elektrik ki kòrèk la pou aplikasyon w lan. Dekonekte ploge a nan sous kouran an anvan ou fè nenpòt ajisteman, chanje akseswa, oswa sere zouti elektrik yo.
• Kickback: Be prepared for kickback. Hold the tool firmly with both hands.

Kontni pake

Verifye ke tout atik yo prezan lè w ap debale yo:

• Bosch EasyImpact 600 Hammer Drill
• Manch oksilyè
• Pwofondè Stop
• Bosch 34-piece X-Line Drill and Bit Set (for wood, masonry, and metal)
• Manyèl itilizatè

Image: Bosch EasyImpact 600 Hammer Drill and its dedicated carrying case.

Image: The Bosch 34-piece X-Line Drill and Bit Set, showcasing various bits for wood, masonry, and metal.

Pwodwi souview

Familiarize yourself with the main components of the Bosch EasyImpact 600 Hammer Drill:

1. Keys Chuck
2. Mode Selector (Drilling / Hammer Drilling)
3. Speed Pre-selection Wheel
4. On/Off switch
5. Lock-on Button (for continuous operation)
6. Pou pi devan / ranvèse switch wotasyon
7. Manch oksilyè
8. Pwofondè Stop

Image: The Bosch EasyImpact 600 Hammer Drill, illustrating its main components including the auxiliary handle and depth stop.

Enstalasyon

1. Mete manch oksilyè a an plas

The auxiliary handle can be rotated to any position for optimal grip and control. Loosen the handle by turning it counter-clockwise, position it as desired, and then tighten it clockwise until secure.

2. Inserting the Depth Stop

Insert the depth stop into the auxiliary handle. Adjust its position to set the desired drilling depth. Secure it by tightening the auxiliary handle.

3. Inserting Drill Bits

1. Asire w ke dril la debranche nan sous kouran an.
2. Open the keyless chuck by turning it counter-clockwise until the jaws are wide enough to accept the drill bit.
3. Mete ti moso an konplètman nan mandrin a.
4. Tighten the chuck firmly by turning it clockwise until the bit is securely gripped. Do not overtighten.

Enstriksyon Operasyon

1. Chwazi Mode Operasyon

• Drilling (Rotary): For drilling in wood, metal, plastic, and tiles. Set the mode selector to the drill symbol.
• Perçage ak mato: For drilling in masonry and concrete. Set the mode selector to the hammer drill symbol.

2. Ajiste vitès

Use the speed pre-selection wheel to set the desired rotational speed. Lower speeds are suitable for larger drill diameters and softer materials, while higher speeds are for smaller diameters and harder materials. The on/off switch also allows for variable speed control based on trigger pressure.

3. Kòmanse ak kanpe

• To start the drill, press the On/Off switch.
• For continuous operation, press the lock-on button while the On/Off switch is depressed.
• To stop the drill, release the On/Off switch. If locked on, press and release the On/Off switch briefly.

4. Wotasyon pou pi devan/pou pi devan

The forward/reverse rotation switch changes the direction of rotation. Use forward rotation for drilling and reverse rotation for loosening screws or freeing jammed drill bits.

Antretyen

1. Netwayaj

Keep the ventilation slots of the power tool clean to prevent overheating. Regularly clean the chuck and housing with a soft, damp twal. Pa sèvi ak solvang oswa pwodui netwayaj abrazif.

2. Depo

Store the drill and accessories in a dry, secure place, out of reach of children. Use the provided carrying case for protection.

3. Drill Bit Care

Clean drill bits after use. Sharpen or replace dull bits to maintain optimal performance and prevent strain on the drill.

Depanaj

• Drill does not start: Check if the power cord is properly connected. Ensure the On/Off switch is fully depressed.
• Reduced drilling performance: Check if the drill bit is sharp and suitable for the material. Ensure the correct operating mode (drilling/hammer drilling) is selected.
• Vibwasyon twòp: Ensure the drill bit is correctly inserted and tightened in the chuck. Check for damaged drill bits.
• Surchof: Ensure ventilation slots are clear. Do not overload the tool. Allow for cooling periods during prolonged use.

Espesifikasyon

Garanti ak sipò

Bosch power tools are manufactured to high-quality standards. For warranty information, please refer to the warranty card included with your product or visit the official Bosch website for your region. In case of questions or issues, contact Bosch customer service.

Note: Bosch may update product packaging and labeling. This does not affect the product's performance or quality. If you receive a product with different packaging or labeling than expected, rest assured it is the same genuine Bosch product with identical specifications and benefits.

For service, spare parts, or accessories, please contact your local Bosch service center or authorized dealer. You can find contact information on the official Bosch websit.