Manyèl Itilizatè Tèsè Kab Millenium MCT-10 la

1. Entwodiksyon

The Millenium MCT-10 Cable Tester is a versatile and essential tool designed for quickly and accurately testing various audio and data cables. It supports a wide range of connector types, including XLR, TRS Jack, Phono, DIN, and SpeakON, making it ideal for musicians, audio engineers, and IT professionals. This manual provides detailed instructions on the setup, operation, maintenance, and troubleshooting of your MCT-10 Cable Tester.

2. Enfòmasyon sou Sekirite

Please read and understand all safety instructions before operating the device. Keep this manual for future reference.

• Pa ekspoze aparèy la nan dlo oswa imidite twòp.
• Evite jete oswa sibi aparèy la nan gwo enpak.
• Pa eseye ouvri oswa modifye aparèy la. Konfye tout antretyen bay pèsonèl kalifye.
• Sèvi ak sèlman kalite pil ki espesifye a epi asire polarite ki kòrèk la pandan enstalasyon an.
• Retire pil si aparèy la pa pral itilize pou yon peryòd pwolonje.

3. Pake kontni

Verifye ke tout atik yo prezan nan pakè a:

• Millenium MCT-10 Cable Tester unit
• Two test leads with banana plugs and alligator clips (red and black)
• Manyèl Itilizatè (dokiman sa a)

Figure 3.1: Millenium MCT-10 Cable Tester with its two included test leads.

4. Pwodwi souview

The MCT-10 features a robust design with multiple input/output ports and intuitive indicators for efficient cable testing.

Figure 4.1: Top panel layout of the MCT-10 Cable Tester.

4.1. Kontwòl ak Endikatè

• Rotary switch: Selects the pin to be tested (1-5).
• LED Indicators (1-5): Illuminate to show corresponding pins connected.
• Dirije tè: Illuminates to indicate a connection (short circuit) from a pin to the shell/ground.
• Battery Check LED: Illuminates when the rotary switch is fully clockwise, indicating a charged battery.

4.2. Connector Types

The MCT-10 supports the following connector types for testing:

• XLR: Male and Female (3-pin)
• TRS Jack: 6.35mm (1/4 pous)
• Phono (RCA): Standard RCA connectors
• DIN: 3-pin, 5-pin, 7-pin, 8-pin (MIDI, etc.)
• SpeakON: 4-pol
• Banana Jacks: For continuity testing with included leads.

5. Enstalasyon

5.1. Enstalasyon batri

The MCT-10 requires a 9V battery (not included) for operation. The battery compartment is located on the bottom of the unit.

1. Jwenn kouvèti konpatiman batri a anba aparèy la.
2. Lift the cover to withdraw it.
3. Connect a 9V battery to the battery clip, ensuring correct polarity (+ to + and - to -).
4. Place the battery into the compartment and replace the cover, ensuring it clicks securely into place.

Figure 5.1: Battery compartment on the underside of the MCT-10.

6. Operasyon Enstriksyon

The MCT-10 allows for comprehensive testing of various cable types. Always ensure the cable is disconnected from all equipment before testing.

6.1. Standard Cable Testing (XLR, TRS, Phono, DIN, SpeakON)

1. Connect one end of the cable to be tested into the corresponding input port on one side of the MCT-10.
2. Connect the other end of the cable into the corresponding output port on the opposite side of the MCT-10. For example, an XLR male connector into the XLR female port, and an XLR female connector into the XLR male port.
3. Rotate the rotary switch clockwise, cycling through pins 1 to 5.
4. Obsève endikatè LED yo:
   • A pair of LEDs (e.g., '1' on the left and '1' on the right) will illuminate simultaneously if the corresponding pins are connected correctly.
   • If a pin is short-circuited to the shell/ground, the "Ground" LED will illuminate along with the corresponding pin LED.
   • If an LED does not illuminate for a specific pin, it indicates an open circuit (broken wire) for that pin.
   • If unexpected LEDs illuminate, it indicates a short circuit between pins.

Figure 6.1: MCT-10 in operation, testing a cable.

6.2. Continuity Testing with Banana Jacks

The MCT-10 can also be used as a basic continuity tester for individual wires or components using the included test leads.

1. Insert the banana plugs of the red and black test leads into the corresponding banana jacks on the MCT-10.
2. Touch the alligator clips to the two points you wish to test for continuity.
3. If there is continuity (a complete circuit), the "Battery Check" LED will illuminate, and an audible beeper will sound.

6.3. Battery Check Function

To check the battery level of the MCT-10:

1. Rotate the rotary switch fully clockwise to the "Battery Check" position.
2. If the "Battery Check" LED illuminates brightly, the battery has sufficient charge. If it is dim or does not illuminate, the battery needs to be replaced.

7. Antretyen

7.1. Netwayaj

Clean the exterior of the MCT-10 with a soft, dry cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the finish or internal components.

7.2. Depo

Store the device in a cool, dry place away from direct sunlight and extreme temperatures. If storing for an extended period, remove the battery to prevent leakage.

7.3. Ranplasman batri

Replace the 9V battery when the "Battery Check" LED appears dim or does not illuminate during the battery check function, or if the unit fails to power on. Refer to Section 5.1 for battery installation instructions.

NAN. Depanaj

If you encounter issues with your MCT-10 Cable Tester, refer to the following table for common problems and solutions:

9. Espesifikasyon

10. Enfòmasyon sou Garanti

The Millenium MCT-10 Cable Tester comes with a manufacturer's warranty. For detailed information regarding warranty terms, conditions, and duration, please refer to the official Millenium websit la oubyen kontakte kote ou te achte a. Kenbe prèv acha ou a pou reklamasyon garanti.

11. Sipò pou Kliyan

For technical assistance, troubleshooting beyond this manual, or service inquiries, please contact Millenium customer support. Contact information can typically be found on the official Millenium websit la oubyen sou anbalaj pwodwi a.