THOMSON TT700 Premium Turntable User Manual

1. Entwodiksyon

Mèsi pou acha aasing the THOMSON TT700 Premium Turntable. This manual provides essential information for the proper setup, operation, and maintenance of your new turntable. Please read this manual thoroughly before use and retain it for future reference.

The TT700 is designed to deliver a high-quality vinyl listening experience, featuring a belt-drive system, an AT91 Audio Technica cartridge, adjustable counterweight, and antiskating control.

2. Enfòmasyon enpòtan sou sekirite

• Sous pouvwa: Ensure the turntable is connected to a 230V AC power supply.
• Plasman: Place the turntable on a stable, level surface away from direct sunlight, heat sources, and excessive dust or vibrations.
• Imidite: Pa ekspoze aparèy la anba lapli, imidite, oswa likid.
• Vantilasyon: Pa bloke ouvèti vantilasyon.
• Netwayaj: Disconnect the power before cleaning. Use a soft, dry cloth. Avoid abrasive cleaners.
• Sèvis: Pa eseye fè antretyen aparèy la tèt ou. Konfye tout antretyen bay pèsonèl kalifye.
• Timoun: Keep out of reach of children. Small parts could be a choking hazard.

3. Pake kontni

Verifye ke tout atik sa yo enkli nan pakè ou a:

• THOMSON TT700 Turntable Unit
• Plat
• Dust Cover (Removable Transparent Cover)
• AT91 Audio Technica Cartridge (pre-installed or separate)
• Kontrepwa
• Slipmat
• RCA Audio Kab
• RCA to AUX-IN 3.5mm Adapter
• Power Adapter (230V Mains Power Supply)
• Manyèl Itilizatè (dokiman sa a)

4. Pwodwi souview

Familiarize yourself with the components of your TT700 turntable:

5. Enstriksyon Enstalasyon

5.1 Debalaj ak plasman

1. Ak anpil atansyon retire tout eleman nan anbalaj la.
2. Place the turntable on a flat, stable, and level surface.
3. Install the transparent dust cover by aligning its hinges with the slots at the back of the turntable.

5.2 Enstalasyon plato ak senti

1. Mete plato a sou aks santral la.
2. Locate the drive belt (usually pre-installed on the underside of the platter or around the motor pulley). If not pre-installed, carefully stretch the belt around the motor pulley and the inner rim of the platter.
3. Place the slipmat on top of the platter.

5.3 Cartridge and Tonearm Setup

The AT91 Audio Technica cartridge is typically pre-installed. If not, follow the cartridge manufacturer's instructions for installation.

1. Balanse bra a: Gently remove the stylus protector. While holding the tonearm, rotate the counterweight at the rear until the tonearm floats freely and is perfectly level.
2. Mete Fòs Suivi a: Once balanced, hold the counterweight stationary and rotate the numbered ring on the counterweight to '0'. Then, rotate the entire counterweight (including the numbered ring) counter-clockwise to the recommended tracking force for the AT91 cartridge (refer to cartridge specifications, typically 2.0 grams).
3. Set Antiskating: Adjust the antiskating dial (refer to Figure 3) to match the tracking force you set. This helps prevent the stylus from skipping inwards.

5.4 Koneksyon Audio

The TT700 features a pre-amplified output, allowing direct connection to an amplifier oswa sistèm stereo.

• RCA Sòti: Connect the supplied RCA audio cable from the 'LINE/PHONO OUT' jacks on the turntable to the corresponding 'LINE IN' or 'AUX IN' jacks on your amplifier oswa oratè ki mache ak pisans.
• AUX-IN 3.5mm: If your audio system only has a 3.5mm AUX-IN, use the supplied RCA to AUX-IN 3.5mm adapter.

5.5 Koneksyon pouvwa

1. Connect the power adapter to the DC input jack on the turntable.
2. Plug the power adapter into a suitable 230V AC wall outlet.

6. Operasyon Enstriksyon

6.1 Jwe yon Disk

1. Place a vinyl record on the platter, centered on the spindle.
2. Select the correct playback speed (33 or 45 RPM) using the speed selector switch (refer to Figure 4). For 45 RPM records, you may need a 45 RPM adapter (not included).
3. Move the tonearm lift lever to the 'UP' position to raise the tonearm.
4. Deplase bra a dousman sou rainur ou vle kòmanse sou disk la.
5. Lower the tonearm lift lever to the 'DOWN' position to slowly lower the stylus onto the record. Playback will begin.
6. Use the 'Start/Stop' button to initiate or pause platter rotation.

6.2 Adjusting Pitch

The TT700 features a Pitch Control knob. This allows for fine adjustment of the playback speed.

• Rotate the 'PITCH CONTROL' knob clockwise to slightly increase the playback speed or counter-clockwise to decrease it.

6.3 Stopping Playback and Automatic Return

1. At the end of a record, the tonearm will automatically return to its rest position.
2. To stop playback manually, move the tonearm lift lever to the 'UP' position, then gently guide the tonearm back to its rest.
3. Switch the speed selector to 'OFF' to power down the unit.

7. Antretyen

7.1 Netwaye Stylus la

A clean stylus ensures optimal sound quality and extends record life.

• Use a soft stylus brush, brushing gently from back to front (in the direction of the tonearm).
• Do not use excessive force or brush from side to side.

7.2 Netwaye platin an

• Wipe the turntable cabinet and dust cover with a soft, dry, lint-free cloth.
• Avoid using harsh chemicals or abrasive cleaners, as they can damage the finish.

NAN. Depanaj

9. Espesifikasyon

• Non modèl: TT700
• Mak: THOMSON
• Koulè: Nwa
• Kalite kondwi: Belt Drive
• Vitès: 33 1/3 RPM, 45 RPM
• Katouch: AT91 Audio Technica
• Karakteristik: Adjustable Counterweight, Antiskating, Pitch Control, Automatic Tonearm Return, Pre-amplifye
• Koneksyon: RCA Line/Phono Output, Auxiliary (via RCA to 3.5mm adapter)
• Aparèy konpatib: Headphones (via connected amplifier/receiver)
• Materyèl: Vinyl (referring to the product's primary use, not construction material)
• Pwa atik: 4 Kilogram
• Pwovizyon pou pouvwa: 230V AC

10. Garanti ak sipò

For warranty information, please refer to the warranty card included with your product or visit the official THOMSON website. For technical support or service inquiries, please contact THOMSON customer service through their official channels.