TOTAL Automatic Plastic Water Sprinkler

1. Entwodiksyon

This manual provides essential instructions for the safe and efficient setup, operation, and maintenance of your TOTAL Automatic Plastic Water Sprinkler, Model THPS13601. Please read this manual thoroughly before using the product to ensure optimal performance and longevity. Keep this manual for future reference.

2. Enstriksyon Enstalasyon

Follow these steps to correctly set up your automatic water sprinkler:

1. Depake aspersè a: Carefully remove all components from the packaging. Ensure no parts are missing or damaged.
2. Pozisyon: Select a suitable location in your garden or lawn that requires irrigation.
3. Ground Insertion: Firmly insert the ground spike of the sprinkler into the soil. Ensure it is stable and upright to prevent tipping during operation.
4. Koneksyon kawotchou: Connect a standard 3/4 inch garden hose to the sprinkler's water inlet. Hand-tighten the connection to ensure it is secure and leak-free.

Figi 1: Plis paseview of the TOTAL Automatic Plastic Water Sprinkler.

Figure 2: Dimensions of the sprinkler, approximately 46.5 cm (18.3 inches) in height.

3. Operasyon Enstriksyon

Once the sprinkler is set up, follow these steps for operation:

1. Louvri rezèv dlo a: Gradually turn on the water supply from your faucet. Observe the sprinkler to ensure it is functioning correctly and there are no leaks.
2. Adjust Spray Distance and Pattern: Use the adjustment mechanisms on the sprinkler head to control the spray distance and pattern. This allows you to customize the irrigation area.
3. Set Rotation Angle: The sprinkler features a 360-degree rotating function. Adjust the rotation stops to set the desired irrigation angle, from a partial arc to a full 360-degree circle.
4. Siveye pèfòmans: Periodically check the sprinkler's operation to ensure even water distribution and proper rotation. Adjust as necessary.

4. Antretyen

Regular maintenance helps prolong the life of your sprinkler:

• Netwayaj bouch: Periodically inspect the sprinkler nozzles for any blockages caused by dirt, debris, or mineral deposits. Clean them gently with a small brush or pin if necessary.
• Netwayaj jeneral: Wipe down the exterior of the sprinkler with a damp twal pou retire pousyè tè ak salte.
• Depo ivè: Before the first frost, disconnect the sprinkler from the hose, drain any remaining water, and store it in a dry, protected area to prevent freezing damage.

NAN. Depanaj

If you encounter issues with your sprinkler, refer to the following common problems and solutions:

• Sprinkler Not Rotating or Stuck:
  • Check for debris obstructing the rotating mechanism. Clean if necessary.
  • Ensure adequate water pressure. Low pressure can hinder rotation.
  • If the plastic components appear to be causing friction, carefully inspect for excess material. In some cases, a small amount of plastic may need to be gently trimmed with a knife to allow free movement.
• Modèl espre inegal:
  • Inspect nozzles for blockages and clean them.
  • Verify that the water pressure is sufficient and consistent.
• Dlo koule:
  • Ensure all hose connections are tightly secured.
  • Check the sprinkler body for any visible cracks or damage. If damaged, replacement may be necessary.

6. Espesifikasyon

7. Garanti ak sipò

For warranty information or technical support, please refer to the documentation provided with your purchase or contact TOTAL customer service. Keep your proof of purchase for any warranty claims.