Entwodiksyon
This manual provides comprehensive instructions for the operation and maintenance of your Timex DGTL 40mm Digital Watch, Model TW5M419009J. Designed for active wear, this watch features a digital display, alarm, stopwatch, timer, and INDIGLO® backlight. Please read this manual carefully to ensure proper use and to maximize the lifespan of your watch.

Figi 1: Devan view of the Timex DGTL 40mm Digital Watch.
Karakteristik kle
- 40 mm Matte White Resin Case with pink accents.
- Digital display with time, date, and day of week.
- Fonksyon alam.
- Sports Stopwatch.
- Two Time Zones capability.
- INDIGLO® light-up watch dial for low-light conditions.
- Water resistant to 50 meters (164 feet).
- White Resin Strap, adjustable for wrist circumferences 135 - 190mm (5.3 - 7.5in).
Enstalasyon ak Konfigirasyon Inisyal
Your Timex DGTL watch comes with a pre-installed lithium metal battery. Before first use, you may need to remove a plastic tab from the crown or button area if present, which prevents battery drain during shipping.
Identifying Watch Buttons
Your watch typically features multiple buttons for navigation and setting. While specific labels may vary, common functions include:
- bouton mòd: Used to cycle through different display modes (Time, Alarm, Stopwatch, Timer, Second Time Zone).
- Set/Adjust Button: Used to enter and exit setting modes, or confirm selections.
- Kòmanse / Stop bouton: Used to start and stop functions (e.g., stopwatch, timer) or increment values during setting.
- Limyè bouton: Activates the INDIGLO® backlight or may be used to reset values.

Figi 2: Side view of the watch, illustrating button placement. Refer to your watch for specific button labels.
Mete tan ak dat
- Nan ekspozisyon tan nòmal la, peze bouton an Bouton Mode repeatedly until the time setting mode is indicated (often by flashing digits).
- Peze a Set/Adjust Button to select the digit or segment you wish to change (e.g., hours, minutes, 12/24-hour format, year, month, day). The selected segment will flash.
- Sèvi ak la Bouton Start/Stop to increment the flashing value. Hold the button to advance rapidly.
- Kontinye peze la Set/Adjust Button to move to the next segment (minutes, AM/PM, year, month, day) and adjust using the Bouton Start/Stop.
- Yon fwa tout paramèt yo kòrèk, peze bouton an Bouton Mode or Set/Adjust Button (depending on model) to exit the setting mode and return to the normal time display.
Setting Second Time Zone (T2)
- Nan ekspozisyon tan nòmal la, peze bouton an Bouton Mode repeatedly until "T2" or "Second Time Zone" is displayed.
- Peze a Set/Adjust Button to enter the T2 setting mode. The hour digits will flash.
- Sèvi ak la Bouton Start/Stop pou ajiste lè yo.
- Peze a Set/Adjust Button to move to minutes and adjust using the Bouton Start/Stop.
- Peze a Set/Adjust Button again to save and exit T2 setting.
Enstriksyon Operasyon
Using the INDIGLO® Backlight
Pou klere kadran mont lan nan kondisyon ki pa twò klere, peze bouton an Limyè bouton. The INDIGLO® backlight will activate for a few seconds.
Sèvi ak kronomètr la
- Peze a Bouton Mode repeatedly until the stopwatch display appears (usually indicated by "STP" or "CHRO").
- Peze a Bouton Start/Stop pou kòmanse distribisyon.
- Peze a Bouton Start/Stop ankò pou mete tan an sou poz.
- Pou rekòmanse, peze bouton an Bouton Start/Stop.
- To reset the stopwatch to zero, while paused, press the Limyè bouton or a dedicated Reset Button.
Anviwònman ak Sèvi ak Alam la
- Peze a Bouton Mode repeatedly until the alarm display appears (usually indicated by "ALM").
- Peze a Set/Adjust Button pou antre nan mòd reglaj alam lan. Chif èdtan yo ap flache.
- Sèvi ak la Bouton Start/Stop pou ajiste lè alam lan.
- Peze a Set/Adjust Button to move to minutes and adjust using the Bouton Start/Stop.
- Peze a Set/Adjust Button ankò pou sove lè alam lan.
- Pou aktive oswa dezaktive alam la, anjeneral peze bouton an Bouton Start/Stop while in the alarm display mode. An alarm icon will appear when active.
- Lè alam lan sonnen, peze nenpòt bouton pou fèmen l.
Antretyen
Netwaye Mont Ou
Pou netwaye mont ou a, siye l ak yon twal mou.amp cloth. Avoid using harsh chemicals or abrasive cleaners, as these can damage the resin case and strap. For the resin strap, mild soap and water can be used, followed by thorough rinsing and drying.
Rezistans dlo
Your Timex DGTL watch is water resistant to 50 meters (164 feet). This means it is suitable for light swimming and showering. However, it is pa suitable for diving or prolonged submersion. To maintain water resistance, do not press any buttons underwater.

Figure 3: Timex Water Resistance Guidelines. Your watch is rated for 50 meters.
Watches labeled water-resistant without a depth indicated can withstand splashes and rain, but should not be submerged. To maintain water resistance, do not press any buttons under water unless your watch is indicated as 200 meter water resistant.
Ranplasman batri
The watch uses one Lithium Metal battery. When the display dims or functions become erratic, it may be time to replace the battery. Battery replacement should ideally be performed by a qualified watch technician to ensure proper sealing and maintain water resistance. Attempting to replace the battery yourself may void the warranty and compromise the watch's water resistance.

Figi 4: Retounen view of the watch, showing the case back where the battery is accessed.
Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Ekran mont lan vid oswa li pa klere byen. | Batri ki fèb oswa ki vid. | Ranplase pil la. Gade seksyon "Ranplasman pil" la. |
| Cannot set time/date. | Incorrect button sequence; watch in wrong mode. | Ensure you are in the correct setting mode. Follow the "Setting Time and Date" instructions carefully. Press buttons firmly. |
| Bouton yo pa reponn. | Watch may be in a locked mode; internal malfunction; water ingress. | Try pressing all buttons to see if any respond. If unresponsive after a battery change, contact Timex support. Avoid pressing buttons underwater. |
| INDIGLO® backlight not working. | Batri fèb; pwoblèm fonksyone. | Replace the battery. If the issue persists, contact Timex support. |
| Alam lan pa sonnen. | Alarm is not activated; alarm volume too low (if adjustable); malfunction. | Ensure the alarm is set and activated (check for alarm icon on display). Re-set the alarm time. |
Espesifikasyon
- Nimewo Modèl: TW5M419009J
- Dyamèt ka: 40 mm
- Materyèl ka: Matte White Resin
- Materyèl senti: Rezin blan
- Sikonferans ponyèt: 135 - 190mm (5.3 - 7.5in)
- Rezistans dlo: XNMX Mèt (50 Mèt)
- Kalite ekspozisyon: Digital
- Ekleraj: INDIGLO®
- Kalite batri: 1 batri ityòm metal (enkli)
- Pwa atik: 38.56 g
- Manifakti: Timex
- Depatman: Unisex-granmoun
Garanti ak sipò
Your Timex watch is covered by a manufacturer's warranty. For detailed information regarding warranty terms, conditions, and duration, please refer to the warranty card included with your purchase or visit the official Timex websit.
For customer support, service, or to find authorized service centers, please visit the Timex official support page: Sipò Timex.





