1. Entwodiksyon
Thank you for choosing the Imetec Eco Ceramic Fan Heater, Model 4033. This appliance is designed to provide efficient and comfortable heating for your indoor spaces. Featuring advanced ceramic technology, it offers rapid heating with reduced energy consumption. Please read this manual carefully before use to ensure safe and optimal operation.
Figure 1: Imetec Eco Ceramic Fan Heater, Model 4033.
2. Enfòmasyon sou Sekirite
Toujou swiv prekosyon sekirite debaz yo lè w ap itilize aparèy elektrik pou diminye risk dife, chòk elektrik, ak blesi pou moun.
- Pa kouvri aparèy chofaj la pou evite surchof.
- Kenbe materyèl ki ka pran dife lwen aparèy chofaj la.
- Do not use in bathrooms or wet areas.
- Asire voltage specified on the rating label corresponds to your mains supply voltage.
- Deploge aparèy la lè li pa itilize oswa anvan w netwaye.
3. Pwodwi Features
- Teknoloji seramik: Provides rapid and efficient heating.
- Ekonomize enèji: Reduced energy consumption by up to 40%.
- Versatile Temperature Settings: Offers 3 temperature levels (cool, warm, very warm) for year-round use.
- Anti-Dust Filter: Helps maintain air quality.
- Ambient Thermostat: Allows you to select and maintain your desired room temperature.
Konsomasyon enèji redwi
3 Nivo Tanperati
Filtè anti-pousyè
Anbyen Thermostat
4. Enstalasyon
- Debake: Carefully remove the fan heater from its packaging. Retain the packaging for future storage or transport.
- Plasman: Place the heater on a firm, level surface, ensuring it is at least 1 meter (3 feet) away from walls, furniture, and curtains. Do not place it directly under a power socket.
- Koneksyon pouvwa: Ensure the heater is switched off (turn the control knob to '0' or 'OFF'). Plug the power cord into a suitable 240V AC electrical outlet.
Figure 2: Ensure proper placement and connection.
5. Operasyon Enstriksyon
The Imetec Eco Ceramic Fan Heater features a control knob for power and temperature settings, and a thermostat knob for ambient temperature control.
Figure 3: Control knob for power and temperature settings.
- Power On/Temperature Selection:
- Turn the main control knob clockwise to select the desired operating mode:
- Fan Only (Cool Air): Pou sikilasyon lè san chalè.
- Low Heat (Warm Air): For gentle heating, typically 1200W.
- High Heat (Very Warm Air): For rapid and powerful heating, typically 2000W.
- Ajisteman tèmostat:
- Once a heat setting is selected, turn the thermostat knob (usually the inner knob) clockwise to increase the desired room temperature.
- Aparèy chofaj la ap fonksyone jiskaske li rive nan tanperati ki fikse a, apresa li pral limen epi etenn pou kenbe li.
- Vire bouton tèmosta a nan sans kontrè zegwi mont lan pou diminye tanperati ou vle a.
- Pouvwa Off: Turn the main control knob counter-clockwise to the '0' or 'OFF' position. Unplug the appliance from the power outlet when not in use for extended periods.
Figure 4: The fan heater provides comfortable warmth in various indoor environments.
6. Antretyen
Regular maintenance ensures the longevity and efficient operation of your fan heater.
- Netwaye eksteryè a:
- Toujou debranche aparèy chofaj la epi kite l refwadi nèt anvan ou netwaye li.
- Siye sifas eksteryè yo ak yon mou, damp twal. Pa sèvi ak pwodui netwayaj abrazif oswa solvang.
- Ensure no water enters the interior of the appliance.
- Cleaning the Anti-Dust Filter:
- The anti-dust filter is located at the rear of the unit.
- Gently remove the filter cover and the filter itself.
- Clean the filter with a soft brush or vacuum cleaner to remove accumulated dust.
- Rinse the filter under running water if necessary, ensuring it is completely dry before reinserting.
- Reattach the filter and cover securely.
- Depo: Si w ap sere aparèy chofaj la pou yon bon bout tan, netwaye l byen epi sere l nan anbalaj orijinal li nan yon kote ki sèk e fre.
Figure 5: Location of the anti-dust filter at the back of the unit.
NAN. Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Chofaj pa limen. | Not plugged in; power switch off; no power at outlet; safety cut-out activated. | Check power cord connection; ensure main control knob is on a heat setting; check household fuse/circuit breaker; unplug, wait 10 minutes, then plug in again. |
| No heat, only fan operates. | Main control knob set to fan-only mode; thermostat set too low. | Turn main control knob to a heat setting (Low Heat or High Heat); increase thermostat setting. |
| Heater produces unusual noise. | Dust accumulation on fan blades; loose internal component. | Clean the anti-dust filter and fan area (ensure unit is unplugged); if noise persists, contact customer support. |
| Heater smells burnt. | Dust on heating elements; new unit initial burn-off. | Unplug immediately. Clean dust from elements (when cool). If new, a slight smell is normal for first few uses. If smell persists or is strong, discontinue use and contact support. |
8. Espesifikasyon
| Mak | Imetec |
| Modèl | 4033 |
| Koulè | Blan |
| Voltage | 240 Volt |
| Kantite vitès | 3 |
| Karakteristik espesyal | Electric, Ceramic Technology, Thermostat |
| Pwa atik | 1.57 Kilogram |
| Dimansyon (L x W x H) | 34.79 x 24.8 x 18.9 cm |
| Faktè fòm | Pedestal |
| Andedan kay la / Deyò Itilizasyon | Andedan kay la |
9. Garanti ak sipò
This Imetec Eco Ceramic Fan Heater, Model 4033, comes with a standard manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms and conditions, including warranty duration and coverage details.
For technical support, troubleshooting assistance beyond what is provided in this manual, or warranty claims, please contact Imetec Customer Service. Contact information can typically be found on the official Imetec websit la oubyen sou anbalaj pwodwi a.
Resous sou entènèt: For additional information and support, visit the official Imetec websit: www.imetec.com
