Entwodiksyon
This instruction manual provides essential information for the safe and efficient use of your Imetec Eco Ceramic Diffusion Fan Heater, Model 4035. Please read this manual thoroughly before operating the appliance and retain it for future reference.
The Imetec Eco Ceramic Diffusion Fan Heater features ceramic heating technology for efficient warmth, an Eco Technology mode for reduced energy consumption, 6 temperature settings, a timer function, and an oscillating base for uniform heat distribution. It also includes an anti-freeze function and comes with a remote control for convenient operation.
Figure 1: Imetec Eco Ceramic Diffusion Fan Heater, Model 4035.
Enstriksyon Sekirite Enpòtan
- Asire w ke aparèy la mete sou yon sifas ki estab, plat, epi ki reziste chalè.
- Do not cover the heater or obstruct the air inlets/outlets.
- Kenbe materyèl ki ka pran dife yo nan yon distans ki an sekirite ak aparèy chofaj la.
- Pa sèvi ak aparèy chofaj la nan twalèt, zòn lesiv, oswa lòt kote ki mouye menm jan an.
- Unplug the heater from the power outlet when not in use or before cleaning.
- Pa opere aparèy chofaj la ak yon kòd oswa ploge ki domaje.
- Aparèy sa a se pou itilize andedan kay la sèlman.
Enstalasyon
- Debake: Carefully remove the heater from its packaging. Retain packaging for storage if desired.
- Plasman: Place the heater on a firm, level surface, ensuring there is at least 50 cm of clear space around the front, sides, and rear of the appliance to allow for proper air circulation. Do not place it directly under a power outlet.
- Koneksyon pouvwa: Asire voltage indicated on the rating label matches your mains supply. Insert the power plug firmly into a suitable grounded electrical outlet.
Figure 2: Proper placement of the fan heater in a room.
Enstriksyon Operasyon
The Imetec Eco Ceramic Diffusion Fan Heater can be operated using the control panel on the unit or the supplied remote control.
Figure 3: Control panel of the fan heater.
Power On/Off
- Peze a Bouton pouvwa (
) sou panèl kontwòl la oswa sou kontwòl remote la pou limen oswa etenn aparèy chofaj la.
Temperature and Heat Settings
- The heater offers 6 temperature functions. Use the '+' epi '-' buttons on the control panel or remote to adjust the desired temperature.
- The digital display will show the selected temperature.
- The heater will automatically maintain the set temperature.
Fonksyon osilasyon
- Peze a Bouton osilasyon (
) to activate or deactivate the oscillating movement, which helps distribute heat evenly across the room.
Fonksyon revèy
- Peze a Bouton revèy (
) to set the operating duration. Each press will increase the timer setting. The heater will automatically turn off once the set time has elapsed.
Fonksyon Anti-Jèl
- This function automatically activates the heater if the room temperature drops below a certain threshold (typically 5°C) to prevent freezing. Refer to the full product manual for specific activation details.
Kontwòl Remote
- The remote control allows you to operate all functions of the heater from a distance. Ensure the remote control has working batteries and is pointed towards the heater's receiver.
Antretyen
Netwayaj
- Toujou debranche aparèy chofaj la nan priz kouran an epi kite l refwadi nèt anvan ou netwaye li.
- Siye sifas eksteryè yo ak yon mou, damp twal. Pa sèvi ak pwodui netwayaj abrazif oswa solvang.
- Pa plonje aparèy chofaj la nan dlo oswa nenpòt lòt likid.
- Periodically clean the air inlets and outlets with a vacuum cleaner to remove dust and lint.
Depo
- Si w ap sere aparèy chofaj la pou yon bon bout tan, netwaye l byen epi mete l tounen nan anbalaj orijinal li.
- Store the heater in a cool, dry place, away from direct sunlight and moisture.
Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Chofaj pa limen. | No power supply; power button not pressed; safety switch activated (e.g., tip-over). | Check power cord connection and wall outlet. Press the power button. Ensure the heater is upright on a flat surface. |
| Chofaj la limen men li pa pwodui chalè. | Temperature setting too low; Eco mode active; air inlets/outlets blocked. | Increase the temperature setting. Check for obstructions and clear them. |
| Remote kontwòl pa travay. | Dead batteries; remote not pointed at receiver; obstruction. | Replace batteries. Ensure clear line of sight to the heater's control panel. |
| Bri oswa odè dwòl. | Dust accumulation; internal fault. | Unplug and clean the heater. If the problem persists, discontinue use and contact customer support. |
If you encounter issues not listed here or if solutions do not resolve the problem, please contact Imetec customer support.
Espesifikasyon
- Mak: Imetec
- Modèl: 4035
- Koulè: Nwa ak blan
- Dimansyon (L x W x H): 57.8 x 25.8 x 22.4 cm
- Pwa: 2.2 kg
- Number of Temperature Settings: 6
- Karakteristik espesyal: Oscillating, Timer, Anti-freeze function, Remote Control
- Itilizasyon: Andedan kay la
- ASIN: B0987BBB14
Garanti ak sipò pou kliyan
Your Imetec Eco Ceramic Diffusion Fan Heater is covered by a manufacturer's warranty. Please refer to the warranty card included with your product for specific terms and conditions.
For technical assistance, spare parts, or warranty claims, please contact Imetec customer support through their official websit la oswa enfòmasyon kontak yo bay nan dokimantasyon pwodwi ou a.
You can visit the official Imetec store for more information: Imetec Store.
