1. Entwodiksyon
This manual provides comprehensive instructions for the installation, operation, and maintenance of the Elitech MTC-6000N Microcomputer Controller. The MTC-6000N is a versatile digital temperature controller designed for precise temperature management in cold rooms, refrigerators, and other cooling systems. It features advanced functions including cooling, defrosting, fan control, auxiliary output, and RS-485 communication for remote monitoring. Additionally, it offers temperature calibration, high/low temperature alarms, over-range alarms, and sensor failure alarms to ensure reliable performance.
2. Pwodwi souview
The Elitech MTC-6000N is engineered for ease of use and high accuracy, featuring a multi-functional button panel and a clear dual-screen display for intuitive operation and monitoring.
Figi 2.1: Devan view of the Elitech MTC-6000N controller, showing the dual digital displays for room temperature and off temperature, along with control buttons and indicator lights.
Figure 2.2: Elitech MTC-6000N controller with icons illustrating its key features: 3 Sensors, Cooling, Defrosting, Alarm, Fan, and RS-485 communication.
3. Karakteristik kle
- Siveyans Adistans: Equipped with RS485 communication function for real-time remote monitoring of cold storage conditions.
- Operasyon fasil: Features a multi-functional button panel allowing common functions to be operated with a single button, simplifying setup without needing to navigate complex menus.
- Segondè Presizyon: Utilizes high-precision sensors and chips designed to withstand 3000 times of high and low temperature shocks, ensuring minimal drift and stable performance.
- Ekspozisyon klè: Large-sized panel with dual-screen temperature display, intuitively showing current temperature and set temperature simultaneously.
- Sòti miltip: Provides refrigeration, dual defrosting, fan, and alternative four-way outputs for comprehensive control.
- Detèktè doub: Includes dual sensors for storage temperature and defrosting temperature.
Figure 3.1: The Elitech MTC-6000N controller shown in a cold storage setting, highlighting its application.
4. Espesifikasyon teknik
| Paramèt | Valè |
|---|---|
| Nimewo Modèl | MTC-6000N-SG |
| Mak | Elitech |
| ASIN | B097D7GF6P |
| UPC | 781454242269 |
| Pwovizyon pou pouvwa | 110V |
| Batri obligatwa | Non |
| Mounting Size | 92 * 44mm / 3.6 * 1.7in |
| Dimansyon (apeprè) | 100mm (length) x 82.5mm (height) x 51mm (depth) |
Figure 4.1: Dimensional drawing of the Elitech MTC-6000N controller, showing approximate measurements for length, height, depth, and mounting hole size.
5. Enstalasyon ak Enstalasyon
5.1 Prekosyon sekirite
- Ensure power is disconnected before any installation or wiring.
- Enstalasyon ta dwe fèt pa pèsonèl kalifye.
- Verify kòrèk voltage (110V) before connecting power.
- Avoid installing in environments with excessive moisture, dust, or corrosive gases.
5.2 Montaj
The MTC-6000N is designed for panel mounting. Ensure the cutout dimensions are 92mm x 44mm (3.6in x 1.7in). Secure the controller firmly in place using the provided clips or mounting hardware.
5.3 Dyagram fil elektrik
Refer to the following diagram for proper wiring connections. Pay close attention to power supply, sensor inputs, and output relays for cooling, defrosting, fan, and auxiliary functions. The RS485 communication ports (A and B) are for remote monitoring connections.
Figure 5.1: Detailed wiring diagram for the Elitech MTC-6000N controller, showing connections for power, sensors, and various outputs.
5.4 Enstalasyon Capteur
The controller uses two temperature sensors: one for room temperature and one for defrosting temperature. Install the room temperature sensor in the area where temperature control is critical. Install the defrosting sensor near the evaporator coil to accurately monitor defrosting cycles.
Figure 5.2: Illustration of the three sensors included with the MTC-6000N: two temperature sensors for active use and one spare sensor.
6. Operasyon Enstriksyon
6.1 Ekspozisyon ak Endikatè
The MTC-6000N features a dual-screen display. The upper display shows the current room temperature, and the lower display shows the set temperature or other parameter values during configuration. Various indicator lights illuminate to show the status of cooling, defrosting, fan, and alarm functions.
6.2 Fonksyon bouton
- SET bouton: Used to enter parameter setting mode and confirm changes.
- Bouton HEVE/BA: Used to navigate through parameters and adjust values.
- Bouton pouvwa: Vire inite a sou / sou.
- Bouton dekonjle: Initiates manual defrosting cycle.
- Bouton AUX: Controls the auxiliary output.
Figure 6.1: A hand interacting with the control panel of the Elitech MTC-6000N, demonstrating its user-friendly interface.
6.3 Parameter Settings (Example)
Pou mete tanperati a vle:
- Peze a SET button once. The lower display will flash, showing the current set temperature.
- Sèvi ak la UP or DESANN buttons to adjust the temperature to your desired value.
- Peze a SET button again to confirm and save the setting.
For advanced parameter settings (e.g., defrost interval, fan delay, alarm thresholds), refer to the detailed parameter table in the full product manual (if available) or contact Elitech support for specific codes and ranges.
7. Antretyen
7.1 Netwayaj
Regularly clean the surface of the controller with a soft, damp twal. Pa sèvi ak pwodui netwayaj abrazif oswa solvan, paske sa yo ka domaje ekran an oswa casing. Ensure no liquid enters the unit.
7.2 Sensor Check
Periodically inspect the temperature sensors for any physical damage or corrosion. Ensure they are securely connected and positioned correctly for accurate readings.
7.3 Koneksyon elektrik
Occasionally check all electrical connections to ensure they are tight and free from signs of overheating or loose wiring. Disconnect power before performing any checks.
NAN. Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Kontwolè pa limen | Pa gen kouran; Fil elektrik ki lach; Fuzib ki boule. | Check power source; Verify wiring connections; Inspect and replace fuse if necessary. |
| Lekti tanperati ki pa kòrèk | Faulty sensor; Sensor not properly installed; Sensor cable damage. | Check sensor connection and placement; Replace sensor if faulty; Inspect sensor cable for damage. |
| Cooling/Defrosting not activating | Incorrect parameter settings; Relay failure; Wiring issue to load. | Review and adjust set parameters; Check relay functionality; Verify wiring to cooling/defrosting unit. |
| Alam kontinyèlman aktif | Temperature out of set range; Sensor failure; Alarm parameter misconfiguration. | Check actual temperature vs. set limits; Verify sensor operation; Adjust alarm parameters. |
Si pwoblèm nan pèsiste apre ou fin eseye solisyon sa yo, tanpri kontakte sèvis kliyan Elitech pou plis asistans.
9. Garanti ak sipò
9.1 Enfòmasyon sou Garanti
Elitech products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Elitech websit la. Kenbe resi acha ou kòm prèv acha pou reklamasyon garanti.
9.2 Sipò pou Kliyan
For technical assistance, troubleshooting, or inquiries regarding your Elitech MTC-6000N controller, please contact Elitech customer support. You can find contact information on the Elitech websit entènèt la oubyen atravè magazen kote ou te achte pwodwi a.
Elitech Official Websit: www.elitechlog.com
