Ground Zero Iridium 2600W Max 1Ohm Mono Class D Full Range Amplifier

Entwodiksyon

Thank you for choosing the Ground Zero Iridium GZIA 1.1500D Mono Class D Full Range Amplifizè. Manyèl sa a bay enfòmasyon esansyèl pou bon enstalasyon, operasyon ak antretyen ou. ampTanpri li manyèl sa a avèk atansyon anvan ou eseye enstalasyon oswa operasyon pou asire pèfòmans ak sekirite optimal.

The GZIA 1.1500D is a powerful mono amplifier designed for car audio systems, featuring Class D technology for high efficiency and compact size. It includes variable active crossover, bass boost, and phase shift controls for precise audio tuning.

Karakteristik kle

• Mono ampkonsepsyon lifier
• Efficient Class D technology
• Variable active crossover and bass boost
• Adjustable phase shift
• Ekipman pou pouvwa ki estab
• Large terminals for secure connections
• Black anodized heatsink for effective heat dissipation
• Includes bass remote control
• D 'wo nivo ak fonksyon oto-sou

Ki sa ki nan bwat la

Upon unpacking, please verify that all items are present and undamaged:

• Ground Zero Iridium GZIA 1.1500D Amplifier
• High level adapter cable
• Bass kontwòl remote
• Montaj pyès ki nan konpitè (vis)
• Manyèl Itilizatè (dokiman sa a)

Enstriksyon Sekirite

To prevent injury or damage to the amplifier, vehicle, or other property, please observe the following safety precautions:

• Enstalasyon pwofesyonèl rekòmande: Installation of car audio components requires experience with electrical wiring and vehicle systems. If you are unsure, consult a professional installer.
• Dekonekte batri: Toujou dekonekte tèminal negatif batri machin nan anvan ou kòmanse nenpòt travay elektrik pou evite kous kout.
• Bon vantilasyon: Asire w la amplifier is mounted in a location with adequate airflow to prevent overheating. Do not cover the heatsink.
• Montaj sekirite: Monte la amplifier securely to prevent it from coming loose during vehicle operation or in the event of a collision.
• Fil elektrik kòrèk: Use appropriate gauge wiring for power, ground, and speaker connections as specified in the installation section. Incorrect wiring can cause damage or fire.
• Evite imidite: Pa ekspoze a amplifier a imidite oswa tanperati ekstrèm.
• Pwoteksyon Fuse: Always use the correct fuse rating as specified for the amplifier.

Enstalasyon ak Enstalasyon

Careful planning and execution are crucial for optimal performance and safety. Follow these general guidelines for installation.

Kote montaj

Choose a dry, well-ventilated location away from direct sunlight and heat sources. Ensure sufficient space around the amplifier for air circulation. Common locations include under seats, in the trunk, or behind rear seats.

Koneksyon fil elektrik

Refer to the diagram below for connection points. Ensure all connections are tight and secure to prevent power loss or short circuits.

Figi 1: Anlè ak Anba View of GZIA 1.1500D Amplifier showing controls and connection terminals. The top panel includes REMOTE, BASS BOOST, LPF, PHASE, GAIN, INPUT (RCA and High-Level), and POWER/PROTECT indicators. The bottom panel shows SPEAKER, FUSE, +12V, REM, and GND terminals.

Koneksyon pouvwa (+12V)

Connect a heavy-gauge power cable (e.g., 4 AWG or larger, depending on cable length and system power requirements) directly from the vehicle's positive battery terminal to the +12V terminal on the amplifier. Install an inline fuse holder within 18 inches (45 cm) of the battery, using a fuse rated appropriately for the amplifier (refer to specifications for total fuse rating).

Koneksyon tè (GND)

Connect a heavy-gauge ground cable (same gauge as power cable) from the GND terminal on the amplifier to a clean, unpainted metal point on the vehicle's chassis. Ensure a solid, low-resistance connection. Sand away any paint or rust from the contact point.

Aktivite a Distans (REM)

Connect a remote turn-on wire (typically 18 AWG) from your head unit's remote output to the REM terminal on the amplifizè. Fil sa a siyalize amplifier to turn on when the head unit is powered on.

Note: The GZIA 1.1500D features a high-level input with an auto-on function. If using high-level inputs, the remote wire connection may not be necessary as the amplifier can detect an audio signal and turn on automatically.

Speaker Connection (SPEAKER)

Connect your subwoofer(s) to the SPEAKER terminals. This is a mono amplifier, so ensure your speakers are wired to present a stable impedance to the amplifier (minimum 1 Ohm). Observe correct polarity (+ to + and - to -) for optimal sound.

Input Connection (INPUT)

Antre RCA: Connect RCA cables from your head unit's pre-out (subwoofer or full-range) to the RCA INPUT terminals on the amplifier.

Antre wo nivo: If your head unit does not have RCA outputs, use the included high-level adapter cable to connect to your head unit's speaker outputs. Connect the speaker wires from the head unit to the high-level input connector, then plug the connector into the HI INPUT (AUTO ON) port on the amplifier.

Initial Setup and Adjustments

After all connections are made, double-check your wiring before reconnecting the vehicle's battery. Once powered on, proceed with the following adjustments:

• Akeri kontwòl: Start with the GAIN control at minimum. Play a familiar track and slowly increase the gain until you hear distortion, then back off slightly. This matches the amplifier's input sensitivity to your head unit's output.
• LPF (Filtè ki ba pase): Adjust the LPF to filter out frequencies above your subwoofer's operating range. A common starting point is 80-100 Hz.
• Bass ranfòse: Use the BASS BOOST control sparingly. Excessive bass boost can cause distortion and damage to speakers.
• Faz: Adjust the PHASE switch (0° or 180°) to achieve the best bass response and integration with your front speakers. Listen for the strongest, most impactful bass.

Opere a Amplifier

Yon fwa enstale epi konfigire, la amplifier operates automatically with your vehicle's audio system. The POWER indicator light will illuminate when the amplifier is on. If the PROTECT light illuminates, it indicates a fault condition (e.g., short circuit, overheating, low voltage). Refer to the troubleshooting section.

Figi 2: Devan view of the Ground Zero GZIA 1.1500D amplaviyè, montreasing its sleek black anodized heatsink with the "GROUND ZERO IRIDIUM HIGH POWER AMPLIFIER" branding.

Antretyen

The Ground Zero GZIA 1.1500D ampLifter a mande yon antretyen minimòm. Swiv direktiv sa yo pou asire l dire lontan:

• Kenbe pwòp: Siye detanzantan amplifier's exterior with a soft, dry cloth to remove dust. Do not use liquid cleaners or solvents.
• Asire vantilasyon: Tcheke regilyèman ke amplifier's heatsink fins are not obstructed by debris or wiring, ensuring proper airflow.
• Tcheke Koneksyon: Occasionally inspect all power, ground, remote, and speaker connections to ensure they remain tight and free of corrosion.
• Evite Surcharge: Pa opere a amplifier beyond its specified power ratings or with speaker impedances lower than 1 Ohm, as this can lead to overheating and damage.

Depanaj

Si ou fè eksperyans pwoblèm ak ou amplifier, konsilte tablo ki anba a anvan ou chèche asistans pwofesyonèl:

Espesifikasyon

The following are key technical specifications for the Ground Zero Iridium GZIA 1.1500D amplifier:

• Modèl: GZIA 1.1500D
• Kalite: Mono Amplifier
• Teknoloji: Klas D
• Maksimòm pwodiksyon pouvwa: 2600W (Max)
• Minimum Stable Impedance: 1 Ohm
• Voltage: 14 Vòlt (Nominal)
• Maksimòm Pwovizyon pou Voltage: 14 Volts
• Dimansyon pwodwi (L x W x H): 14.17 x 7.56 x 1.93 pous (36 x 19.2 x 4.9 cm)
• Pwa: Apeprè 9.13 liv (4.14 kg)
• Kalite montaj: Sifas mòn
• Karakteristik: Variable active crossover, bass boost, phase shift, stable power supply, large terminals, black anodized heatsink, bass remote control, high level input with auto on function.

Garanti ak sipò

Ground Zero products are manufactured to high quality standards. This amplifier is covered by a limited warranty against defects in materials and workmanship. The specific terms and duration of the warranty may vary by region and retailer. Please retain your proof of purchase for warranty claims.

For technical support, warranty service, or further inquiries, please contact your authorized Ground Zero dealer or visit the official Ground Zero website. Do not attempt to repair the amplifier yourself, as this may void the warranty and cause further damage.