Manyèl itilizatè

1. Entwodiksyon

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Hanwha Techwin XNO-6120R/LPR 2MP Low Speed LPR Outdoor IR Network Bullet Camera. This camera is designed for specialized applications such as parking lots, drive-thrus, and entry gates, capable of accurately capturing license plates at speeds up to 35 MPH.

Karakteristik kle yo enkli:

• 2 Megapixel (1920 x 1080) Resolution: Provides clear, high-definition video.
• 12X Optical Zoom (5.2 ~ 62.4mm): Allows for detailed magnification of distant objects.
• H.265/H.264/MJPEG Codec Support: Konpresyon videyo efikas pou optimize depo ak Pleasant.
• Embedded LPR Solution: Integrated license plate recognition for low-speed applications.
• Analiz Videyo Avanse: Includes loitering, directional detection, fog detection, audio detection, digital auto tracking, sound classification, and tampdeteksyon an.
• High Powered IR LEDs: Provides readable length for LPR up to 65 ft in low-light conditions.
• Pwoteksyon Anviwònman Solid: IP67/IP66, NEMA 4X, and IK10 ratings ensure durability in harsh outdoor environments.
• Wide Dynamic Range (WDR): 150dB WDR for clear images in challenging lighting.

2. Enfòmasyon sou Sekirite

Please read all safety instructions carefully before installing and operating the camera. Failure to comply with these instructions may result in injury or damage to the device.

• Sous pouvwa: Use only the specified power supply (12VDC/24VAC/PoE). Incorrect voltage may damage the camera.
• Anviwònman enstalasyon: Ensure the installation location is stable and can support the camera's weight. Avoid installing in areas with excessive vibration or direct exposure to corrosive substances.
• Dlo ak imidite: Although the camera is IP67/IP66 rated for outdoor use, ensure all connections are properly sealed to prevent water ingress. Do not submerge the camera.
• Sèvis: Pa eseye demonte oswa repare kamera a tèt ou. Konfye tout antretyen bay pèsonèl kalifye.
• Tanperati: The camera is designed to operate within -40°C ~ +55°C (-40°F ~ +131°F). Ensure the operating environment stays within this range.

3. Pake kontni

Verifye ke tout konpozan yo prezan nan pake a:

• Hanwha Techwin XNO-6120R/LPR Camera Unit
• Backbox (included)
• Installation Guide / Quick Start Guide (not provided in this manual, but typically included)
• Mounting Hardware (screws, anchors - specific types may vary)
• Waterproof RJ45 Connector Kit (if applicable)

Note: The package contents may vary slightly depending on the region or specific bundle.

4. Pwodwi souview

The XNO-6120R/LPR is a bullet-style network camera. Familiarize yourself with its main components:

Figi 4.1: Ang devan view of the Hanwha Techwin XNO-6120R/LPR bullet camera. This image shows the main lens, the IR illuminators around the lens, and the integrated sun shield. The camera body is dark gray with "WISENET" branding on the side.

Figi 4.2: Side view of the Hanwha Techwin XNO-6120R/LPR bullet camera, illustrating the adjustable mounting bracket and the base plate with screw holes for installation. The camera's cylindrical body extends from the base.

• Lantiy: 12X optical zoom lens (5.2mm ~ 62.4mm) with auto-focus.
• IR poul: High-powered infrared illuminators for night vision and LPR.
• Lojman: Weatherproof (IP67/IP66) and vandal-resistant (IK10) bullet housing.
• Mounting Support: Adjustable bracket for precise positioning.
• Cable Gland/RJ45 Connection: Located at the rear for network and power connections.
• Pò USB: For easy installation and maintenance.
• Fant pou kat SD: Dual SD card slots for local storage.

5. Enstalasyon

5.1. Physical Installation and Mounting

1. Chwazi yon kote: Chwazi yon bon kote deyò ki bay bon jan kalite limyè. view for LPR, ensuring it is within range of power and network connections. Consider the camera's operating temperature range.
2. Preparasyon Sifas Montage: Use the included backbox as a template to mark drilling points on the mounting surface. Ensure the surface is strong enough to support the camera.
3. Secure the Backbox: Attach the backbox securely to the mounting surface using appropriate screws and anchors.
4. Attach Camera to Backbox: Connect the camera unit to the backbox, ensuring proper alignment and secure fastening.
5. Ajiste ang: Loosen the adjustment screws on the mounting bracket to set the desired camera angle and field of view. Tighten screws once adjusted.

5.2. Fil elektrik ak Koneksyon

The XNO-6120R/LPR supports Power over Ethernet (PoE), 12VDC, or 24VAC power inputs.

1. Rezo Koneksyon: Connect an RJ45 Ethernet cable from your network switch (preferably PoE-enabled) to the camera's RJ45 port. Ensure the connection is secure and waterproof using the provided kit if necessary.
   

   Figi 5.2.1: Example of an RJ45 Ethernet cable, used for network and PoE connection to the camera.
2. Koneksyon kouran (si w pa itilize PoE): If not using PoE, connect a 12VDC or 24VAC power adapter to the camera's power input terminal. Refer to the camera's wiring diagram for correct polarity.
3. Enstalasyon kat SD: If local storage is desired, insert compatible SD cards into the dual SD card slots.

5.3. Inisyal Konfigirasyon

After physical installation and connection, access the camera's web koòdone pou konfigirasyon inisyal la.

1. Dekouvri Kamera: Use the Hanwha Techwin Device Manager software (available on the Hanwha Techwin website) to discover the camera on your network. The camera will typically obtain an IP address via DHCP.
2. Aksè Web Entèfas: Louvri a web navigatè a epi antre adrès IP kamera a.
3. Konekte: Enter the default username and password (refer to the quick start guide or Hanwha Techwin documentation for defaults, and change immediately for security).
4. Anviwònman rezo: Configure static IP address, subnet mask, gateway, and DNS settings if required for your network.
5. Dat ak Lè: Set the correct date, time, and time zone. Configure NTP synchronization for accuracy.
6. Mizajou mikrolojisyèl: Check for and install the latest firmware version from the Hanwha Techwin websit pou asire pèfòmans ak sekirite optimal.

6. Opere

6.1. Viv View and Basic Controls

Once configured, you can access the camera's live view through its web interface or a compatible VMS (Video Management System).

• Live Stream: View manje videyo an tan reyèl.
• Kontwòl Zoom: Use the digital zoom controls in the interface to adjust the 12X optical zoom.
• Ajisteman konsantre: The camera features auto-focus. Manual adjustments can be made via the web interface if needed.
• Anviwònman imaj: Adjust brightness, contrast, saturation, sharpness, WDR, and day/night mode settings to optimize image quality for specific lighting conditions.

6.2. LPR (License Plate Recognition) Configuration

The XNO-6120R/LPR features an embedded LPR solution. Proper configuration is crucial for accurate plate recognition.

1. Access LPR Settings: Navigate to the LPR/Analytics section in the camera's web koòdone.
2. Define Detection Zone: Draw a detection zone that covers the area where license plates are expected to appear. Ensure the zone is optimized for the camera's field of view and the expected vehicle speed (up to 35 MPH).
3. Set Recognition Parameters: Configure parameters such as minimum/maximum plate size, angle tolerance, and character set.
4. Aksyon evènman: Define actions to be taken upon plate recognition, such as sending metadata to a VMS, triggering an alarm, or logging data.
5. Tès: Conduct thorough testing with various vehicles and lighting conditions to verify LPR accuracy.

6.3. Advanced Video Analytics

The camera supports various intelligent video analytics:

• Loitering Detection: Detects objects remaining in a defined area for too long.
• Directional Detection: Triggers an event when an object moves in a specified direction.
• Fog Detection: Improves image clarity in foggy conditions and can trigger alerts.
• Deteksyon odyo: Triggers events based on sound levels or specific sound classifications.
• TampDeteksyon ering: Alerts if the camera is obstructed, moved, or spray-painted.

Configure these analytics in the camera's web interface under the "Event" or "Analytics" sections, defining detection zones, sensitivity, and associated actions.

6.4. Anrejistreman ak Lektur

Record video to local SD cards, a Network Video Recorder (NVR), or a compatible VMS.

• Anrejistreman Orè: Set up continuous recording, event-triggered recording (e.g., by LPR or motion detection), or scheduled recording.
• Konfigirasyon Depo: Format SD cards via the web interface. Configure network storage (NAS/NVR) settings.
• Lektur: Aksè anrejistre footage through the camera's web interface (for SD card recordings) or your NVR/VMS for network recordings. Use date/time filters and event logs to locate specific incidents.

7. Antretyen

7.1. Netwayaj

Netwayaj regilye ede kenbe yon bon jan kalite imaj optimal epi pwolonje lavi kamera a.

• Lens and Housing: Gently wipe the lens and camera housing with a soft, clean, lint-free cloth. For stubborn dirt, use a mild, non-abrasive cleaning solution specifically designed for optical lenses.
• Evite: Do not use strong detergents, solvents, or abrasive materials, as these can damage the lens coating or housing finish.
• Frekans: Clean as needed, especially in dusty or high-traffic environments.

7.2. Mizajou Firmware

Periodically check the Hanwha Techwin website for new firmware versions. Firmware updates often include bug fixes, performance improvements, and new features.

1. Download mikrolojisyèl: Telechaje dènye firmwèr la file for your specific model (XNO-6120R/LPR) from the official Hanwha Techwin support page.
2. Aksè Kamera: Log in to the camera's web koòdone.
3. Mizajou Pwosesis: Navigate to the "System" or "Maintenance" section and locate the firmware update option. Follow the on-screen instructions to upload and install the firmware.
4. Pa entèwonp: Do not power off the camera or disconnect the network during the firmware update process, as this can brick the device.

7.3. Konsiderasyon anviwònman

Ensure the camera's operating environment remains within specified limits to prevent damage and ensure longevity.

• Tanperati: Verify that the ambient temperature stays between -40°C ~ +55°C (-40°F ~ +131°F). The built-in heater assists in cold conditions.
• Imidite: Maintain humidity levels within the camera's specified operating range.
• Vibration: Minimize exposure to excessive vibration, which can affect image stability and component lifespan.

NAN. Depanaj

This section addresses common issues you might encounter with the XNO-6120R/LPR camera.

9. Espesifikasyon

10. Garanti ak sipò

For warranty information, please refer to the official Hanwha Techwin warranty policy available on their websit la oubyen kontakte konsesyonè otorize ou a. Kenbe prèv acha ou a pou reklamasyon garanti.

For technical support, product documentation, and software downloads, visit the official Hanwha Techwin support website. You may also contact their customer service or your local distributor for assistance.

Note: Specific warranty terms and support availability may vary by region.