Entwodiksyon
This manual provides essential information for the safe and effective operation of your Amazon Basics Class II Cross-Line Laser Level. Please read these instructions thoroughly before use and retain them for future reference.
Enfòmasyon sou Sekirite
WARNING: CLASS II LASER PRODUCT
This device emits a Class II laser beam. Avoid direct eye exposure to the laser beam. Do not stare into the beam. Do not intentionally direct the laser beam at others. Use caution when operating the laser level to prevent accidental exposure.
- Always operate the laser level in a safe manner.
- Pa eseye modifye oswa demonte aparèy la.
- Kenbe soti nan atenn timoun yo.
- Ensure the work area is clear of obstructions and reflective surfaces that could redirect the laser beam.
Kontni pake
- Amazon Basics Class II Cross-Line Laser Level
- L-shaped Magnetic Pivoting Base
- Pote Étui
- Manyèl itilizatè
Pwodwi souview
The Amazon Basics Cross-Line Laser Level is designed to project bright horizontal, vertical, or cross-line laser beams for various leveling and alignment tasks. Its compact design and versatile mounting options make it suitable for indoor and outdoor use.
Karakteristik kle:
- Projects horizontal, vertical, and cross-line green laser beams.
- 59-foot (708 inch) range for indoor and outdoor applications.
- Automatic self-leveling mode for quick and accurate setup.
- Manual mode for locking the laser at desired angles.
- Durable plastic and metal construction with a soft rubber exterior for enhanced grip.
- Battery-operated (AA batteries, not included).
Enstalasyon
1. Enstalasyon batri
- Locate the battery compartment on the bottom of the laser level.
- Glise kouvèti lòj batri a louvri.
- Insert two AA batteries (not included), ensuring correct polarity (+/-).
- Fèmen kouvèti lòj batri a byen.
2. Monte Aparèy la
The laser level can be used freestanding or mounted using the included L-shaped magnetic pivoting base. The base features a 1/4-inch screw thread for attachment to the laser level and magnets for securing to metallic surfaces. It is also compatible with standard tripods (not included).
Enstriksyon Operasyon
1. Power On/Off
To turn the device on, slide the lock switch on the side to the unlocked position. To turn off, slide the switch to the locked position.
2. Automatic (Self-Leveling) Mode
When the lock switch is in the unlocked position, the laser level will automatically self-level within 4 degrees. If the device is outside this range, the laser lines will blink to indicate it is not level. Adjust the device's position until the laser lines become solid, indicating a level projection.
3. Manyèl Mode
To use the laser at a specific angle (e.g., for stair railings), slide the lock switch to the locked position. The laser lines will remain fixed at the angle you set. The lines may blink in manual mode to indicate that the self-leveling feature is disengaged.
4. Laser Line Selection
Press the power button on top of the device to cycle through different laser line modes: horizontal line, vertical line, or cross-line (both horizontal and vertical).
Antretyen
- Keep the laser level clean and free of dust and debris. Use a soft, dry cloth for cleaning.
- Store the device in its carrying pouch in a cool, dry place when not in use.
- Retire pil yo si ou pa pral itilize aparèy la pou yon peryòd tan pwolonje pou anpeche flit.
- Pa plonje aparèy la nan dlo oswa ekspoze li nan tanperati ekstrèm.
Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Liy lazè yo ap flache. | In Automatic mode, the device is not level (outside 4-degree range). In Manual mode, blinking is normal. | In Automatic mode, adjust the device's position until the lines become solid. No action needed in Manual mode. |
| No laser lines. | Batteries are dead or incorrectly installed. Device is off. | Check battery polarity and replace if necessary. Ensure the lock switch is in the unlocked position. |
| Laser lines are dim. | Low battery power. Bright ambient light. | Replace batteries. Use the laser level in areas with less ambient light for better visibility. |
Espesifikasyon
- Mak: Amazon Basics
- Nimewo Modèl: CLL-002
- Klas lazè: Klas II
- Kalite lazè: Green Cross-Line Laser
- Ranje: 59 pye / 708 pous
- Self-nivelman Range: ± 4 degre
- Materyèl: 70% plastik, 30% metal
- Koulè: Jòn/Nwa
- Sous pouvwa: 2 x AA pil (pa enkli)
- Dimansyon pwodwi: 2.8" L x 2.4" W x 3.3" H
- Pwa atik: 12 ons (0.34 kilogram)
- Mòd operasyon: Otomatik / Manyèl
Garanti ak sipò
Pou enfòmasyon sou garanti a oswa pou sipò kliyan, tanpri al gade paj ofisyèl Amazon Basics la. websit la oubyen kontakte sèvis kliyan Amazon dirèkteman. Kenbe resi acha ou a pou reklamasyon garanti.
