Entwodiksyon
This manual provides essential information for the proper use and maintenance of your Compustar 2WT13R-SF 2-Way Color LCD Remote. This remote is designed to provide advanced control and feedback for compatible Compustar vehicle security and remote start systems.
Konpatibilite
Nòt Konpatibilite Enpòtan:
- This remote ONLY works with the Compustar PRO-T13 System. It will NOT work with other systems.
- You MUST HAVE Compustar Antenna Model ANT-2WSF for this remote to function correctly.
Ensure your existing system meets these requirements before attempting to use this remote.
Pwodwi souview
Karakteristik kle
- 2-Way Communication: Receive instant confirmation on the remote's LCD screen.
- Color LCD Display: Provides clear visual feedback on vehicle status.
- Up to 3 Mile Range: Extended operating range for convenience.
- Ergonomic Design: Comfortable to hold and use.
- Real-time Vehicle Status: Displays battery voltage and interior temperature (if supported by system).
Konpozan Remote
The Compustar 2WT13R-SF remote features a vibrant color LCD screen and intuitive buttons for controlling your vehicle's functions.
Imaj: Devan view of the Compustar 2WT13R-SF remote, displaying its color LCD screen with vehicle status icons and control buttons.
Imaj: Angle view of the Compustar 2WT13R-SF remote, showcasing its sleek design and button placement.
Enstalasyon
This remote is a replacement or additional remote for an existing Compustar PRO-T13 system. It requires programming to your vehicle's system to function.
Important: This package DOES NOT INCLUDE programming instructions. You must use the instructions that came with your PRO-T13 system or consult a certified Compustar installer for programming.
Typically, programming involves a sequence of steps using the vehicle's ignition and the remote's buttons. Refer to your PRO-T13 system's installation or user manual for detailed programming procedures.
Operasyon
The 2WT13R-SF remote provides intuitive control over your vehicle's functions. The exact functions and button presses may vary slightly based on your PRO-T13 system's configuration.
Fonksyon debaz:
- Fèmen: Peze a Fèmen button (usually indicated by a closed padlock icon) once to lock your vehicle's doors. The remote will provide visual and audible confirmation.
- Debloke: Peze a Debloke button (usually indicated by an open padlock icon) once to unlock your vehicle's doors. Confirmation will be displayed on the LCD.
- Kòmanse/Arè a distans: Peze epi kenbe la Kòmanse/Stop button (often a power icon) for approximately 2-3 seconds to remote start or stop your vehicle. The LCD will show engine status.
- Lage kòf: Peze epi kenbe la Kòf button (if available, usually an open trunk icon) for 2-3 seconds to pop the trunk.
- Panik: Peze epi kenbe la Panik button (if available, often a horn icon) for 2-3 seconds to activate the vehicle's alarm. Press again to disarm.
Refer to your PRO-T13 system manual for advanced features, custom button programming, and detailed LCD icon explanations.
Antretyen
Ranplasman batri:
The 2WT13R-SF remote uses a replaceable battery. When the battery icon on the LCD indicates low power, or the remote's range decreases significantly, it's time to replace the battery.
- Chèche lòj batri a sou do remote la.
- Carefully open the compartment using a small flat-head screwdriver or a coin.
- Note the orientation of the old battery and remove it.
- Insert a new battery (typically a CR2032 coin cell, but verify with your PRO-T13 manual or the remote's markings) with the positive (+) side facing up.
- Fèmen lòj batri a byen.
Swen ak netwayaj:
- Avoid exposing the remote to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture.
- Netwaye telekòmand lan avèk yon twal mou epi sèk. Pa sèvi ak pwodui chimik ki agresif oswa pwodui netwayaj abrazif.
- Protect the LCD screen from scratches. Consider purchasing a protective case.
Depanaj
Pwoblèm komen ak solisyon:
- Remote pa reponn:
- Check the remote's battery and replace if low.
- Ensure you are within range of the vehicle and the ANT-2WSF antenna.
- Verify the remote is properly programmed to your PRO-T13 system. If unsure, consult your system's manual or a professional installer.
- Kout distans operasyon:
- Ranplase pil telekòmand lan.
- Ensure there are no major obstructions (buildings, hills) between the remote and the vehicle.
- Check for sources of radio interference in the area.
- Pwoblèm ekspozisyon LCD:
- Si ekran an fèb oswa li ap tranble, ranplase pil la.
- If the display is blank, ensure the remote is powered on (if applicable) and the battery is charged.
For persistent issues, contact Compustar customer support or a certified Compustar dealer.
Espesifikasyon
| Karakteristik | Detay |
|---|---|
| Nimewo Modèl | 2WT13R-SF |
| Mak | Compustar |
| Koneksyon Teknoloji | Enfrawouj (Note: While listed as Infrared, remote start systems typically use Radio Frequency for primary communication.) |
| Aparèy konpatib | Compustar PRO-T13 System |
| Max Kantite Aparèy Sipòte | 1 (pa telekòmand) |
| Karakteristik espesyal | Ergonomik |
| Pwa atik | 1.76 ons |
| Dimansyon pake | 4.53 x 2.44 x 1.18 pous |
| Dat Premye Disponib | 24 mas 2021 |
Garanti ak sipò
This Compustar product is covered by the manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your original Compustar PRO-T13 system or visit the official Compustar websit.
For technical support, troubleshooting assistance beyond this manual, or to locate a certified installer, please contact Compustar customer service or your authorized Compustar dealer.
