1. Entwodiksyon
Thank you for choosing the IKEA NOLLATTA Digital Alarm Clock. This manual provides essential information for the safe and efficient use of your new alarm clock. Please read it thoroughly before use and keep it for future reference.
The IKEA NOLLATTA is a modern digital alarm clock featuring a clear LED display, adjustable brightness, and a compact design suitable for various spaces. It operates via a USB power cable and includes a battery backup for time memory.
2. Enfòmasyon sou Sekirite
- Ensure the product is connected to a compatible USB power source (5V/1A adapter, not included).
- Pa ekspoze revèy la nan dlo oswa imidite twòp.
- Keep the clock away from direct sunlight and heat sources.
- Only use the specified CR2032 3V lithium battery for time memory. Incorrect battery type may cause damage.
- Do not attempt to disassemble or repair the clock yourself. Contact qualified service personnel for assistance.
- Keep batteries out of reach of children. Swallowing batteries can be fatal.
3. Pake kontni
Verifye ke tout atik yo prezan nan pakè a:
- IKEA NOLLATTA Digital Alarm Clock (Main Unit)
- USB Power Cable (1.5m)
- Desktop kanpe
- Manyèl itilizatè
Note: A CR2032 3V lithium battery is required for time memory backup but is sold separately and not included in the package. A 5V/1A USB power adapter is also required and sold separately.
4. Pwodwi souview
The IKEA NOLLATTA features a minimalist design with a clear LED display. The main unit includes control buttons on the back for setting time and alarms, and a light sensor for automatic brightness adjustment.

Figure 1: IKEA NOLLATTA Digital Alarm Clock in a bedroom setting.

Figi 2: Dèyè view of the clock, highlighting the control buttons, USB port, and battery compartment.
Control Buttons (Rear of Clock):
- Bouton MODE: Used to switch between time, date, and temperature display modes, and to enter setting modes.
- UP bouton: Used to increase values during setting, or to adjust brightness.
- DESANN bouton: Used to decrease values during setting, or to adjust brightness.
Lòt Karakteristik:
- Capteur limyè: Ajiste klète ekran an otomatikman selon limyè anbyen an.
- Port pouvwa USB: Connects the clock to a power source using the included USB cable.
- Lòj batri: Holds a CR2032 3V lithium battery for time memory backup.
5. Enstalasyon
5.1. Koneksyon pouvwa
- Insert the small end of the included USB power cable into the USB power port on the back of the clock.
- Connect the other end of the USB cable to a 5V/1A USB power adapter (not included) and plug it into a wall outlet. The display will light up.
5.2. Installing Time Memory Battery (CR2032, sold separately)
The CR2032 battery provides backup power to retain time settings in case of a power outage or when the USB cable is disconnected. The display will not be active on battery power alone, but the internal clock and alarm settings will be preserved.
- Jwenn lòj batri a sou do revèy la.
- Louvri kouvèti lòj batri a.
- Insert one CR2032 3V lithium battery, ensuring correct polarity (+/-).
- Fèmen kouvèti lòj batri a byen.
5.3. Plasman
The IKEA NOLLATTA can be placed on a flat surface using the included desktop stand or mounted on a wall.
- Plasman Desktop: Attach the desktop stand to the bottom of the clock. Place the clock on a stable, flat surface.
- Montaj mi: The clock has keyhole slots on the back for wall mounting. Use appropriate screws and wall plugs (not included) for your wall type. Ensure the clock is securely mounted before releasing li.
6. Operasyon Enstriksyon
6.1. Mete Tan ak Dat
- Peze epi kenbe la MÒD button for 3 seconds to enter time setting mode. The hour digits will start blinking.
- Sèvi ak la UP epi DESANN bouton pou ajiste lè a.
- Peze MÒD ankò pou ale nan anviwònman minit la. Sèvi ak UP epi DESANN pou ajiste minit yo.
- Kontinye peze MÒD to cycle through setting the year, month, and day, adjusting each with the UP epi DESANN bouton.
- Apre ou fin mete jou a, peze MÒD pou sòti nan mòd anviwònman an.
6.2. 12/24-Hour Format Selection
Nan mòd ekspozisyon tan nòmal, peze la UP bouton an pou chanje ant fòma 12 èdtan ak 24 èdtan.
6.3. Anviwònman Alam
The alarm function works even when the display is turned off.
- Peze a MÒD button repeatedly until "AL" appears on the display, indicating alarm mode.
- Peze epi kenbe la MÒD button for 3 seconds. The alarm hour digits will start blinking.
- Sèvi ak la UP epi DESANN bouton yo pou mete lè alam ou vle a.
- Peze MÒD again to move to alarm minute setting. Use UP epi DESANN yo mete minit yo.
- Peze MÒD pou konfime ak sòti paramèt alam.
- To activate/deactivate the alarm, in alarm mode ("AL" displayed), press the UP bouton an. Yon ikòn alam ap parèt/disparèt sou ekran an.
- When the alarm sounds, press any button to snooze. To turn off the alarm, press and hold the MÒD bouton.
6.4. Ajisteman klète
The clock offers 3 levels of brightness (High, Medium, Low) and an automatic adjustment mode, as well as an OFF setting for the display.
- Nan mòd ekspozisyon tan nòmal, peze la DESANN button repeatedly to cycle through brightness levels: High → Medium → Low → OFF.
- The clock also features an automatic brightness adjustment function via its built-in light sensor.
6.5. Display Rotation Mode
The clock can cycle through displaying time, date, and temperature.
- Nan mòd ekspozisyon tan nòmal, peze la MÒD button briefly to switch between Time, Date, and Temperature displays.
- To activate automatic cycling through Time, Date, and Temperature, press and hold the MÒD button until the display starts rotating.
- To stop automatic cycling and return to a static display, press the MÒD bouton yon ti tan ankò.
7. Antretyen
7.1. Netwayaj
Wipe the clock surface with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish.
7.2. Ranplasman batri
If the time memory function is no longer working during power disconnection, replace the CR2032 3V lithium battery in the battery compartment (refer to section 5.2).
NAN. Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Display is off, but alarm still works. | USB power cable disconnected, or power outage. | This is normal behavior if a CR2032 battery is installed for time memory. Reconnect the USB cable to restore the display. |
| Revèy la pa limen. | Pa gen ekipman pou pouvwa. | Ensure the USB cable is securely connected to both the clock and a working 5V/1A USB power adapter. Check the power outlet. |
| Time/Date settings are lost after power disconnection. | CR2032 battery is dead or not installed. | Install a new CR2032 3V lithium battery (sold separately) in the battery compartment. |
| Ekran an twò klere/fèb. | Paramèt klète a bezwen ajisteman. | Peze a DESANN button to cycle through brightness levels (High, Medium, Low, OFF). The clock also has an automatic brightness feature. |
9. Espesifikasyon
- Modèl: NOLLATTA (704.993.50)
- Koulè: Blan
- Dimansyon (apeprè): Length: 21.5 cm, Height: 8.5 cm, Depth: 4 cm
- Materyèl: Clock face: Polystyrene plastic; Back cover/feet: ABS plastic
- Sous pouvwa: USB (5V/1A adapter required, not included)
- Batri Backup: 1 x CR2032 3V Lithium Battery (sold separately) for time memory
- Longè kab: 1.5m USB cable included
- Kalite ekspozisyon: Dirije Digital
- Karakteristik: 3-level dimming, 12/24-hour format, alarm function, automatic brightness adjustment
10. Garanti ak sipò
For information regarding warranty, returns, or technical support, please refer to the purchase documentation or contact your IKEA retailer directly. Keep your proof of purchase for any warranty claims.





