Manyèl Itilizatè Machin Tanbou Analòg Behringer RD-6 la

1. Entwodiksyon

The Behringer RD-6 is an analog drum machine designed to provide classic drum sounds with modern connectivity. It features eight analog drum voices, a 16-step sequencer, and USB/MIDI integration for seamless studio workflow. This manual provides essential information for setting up, operating, and maintaining your RD-6 unit.

2. Enstriksyon Sekirite Enpòtan

• Li enstriksyon sa yo byen anvan ou itilize aparèy la.
• Kenbe enstriksyon sa yo pou referans nan lavni.
• Obsève tout avètisman yo epi swiv tout enstriksyon yo.
• Pa sèvi ak aparèy sa a toupre dlo.
• Netwaye sèlman ak yon twal sèk.
• Pa bloke okenn ouvèti vantilasyon. Enstale li dapre enstriksyon manifakti a.
• Pa enstale tou pre okenn sous chalè tankou radyatè, rejis chalè, recho, oswa lòt aparèy (tankou amplifiers) ki pwodui chalè.
• Pwoteje kòd elektrik la pou yo pa mache oswa kwense, sitou nan priz, resipyan konvenyans, ak pwen kote yo sòti nan aparèy la.
• Itilize sèlman atachman/akseswa manifakti a espesifye.
• Deploge aparèy sa a pandan tanpèt zèklè oswa lè li pa itilize pou yon peryòd tan ki long.
• Refere tout sèvis yo bay pèsonèl sèvis kalifye. Reparasyon nesesè lè aparèy la domaje nenpòt fason, tankou kòd kouran oswa ploge domaje, likid koule oswa objè tonbe nan aparèy la, aparèy la te ekspoze a lapli oswa imidite, li pa fonksyone nòmalman. , oswa li te tonbe.

3. Enstalasyon

3.1 Debake

Carefully unpack your RD-6 unit. Inspect for any signs of damage during transit. Retain the packaging for future transport or storage.

3.2 Koneksyon pouvwa

Konekte adaptè pouvwa a enkli nan DC ENTRE on the rear panel of the RD-6 and then to a suitable power outlet. Ensure the power switch is in the OFF position before connecting.

3.3 Koneksyon Audio

The RD-6 offers various audio output options:

• MELANJE: Connect a standard 1/4-inch TS cable from the MIX OUT jack to your mixer or audio interface for the main stereo output.
• VOICE OUT: Individual 1/4-inch TS outputs are available for each drum voice (OH/CH, CP, CY, LT/HT, SD, BD). Use these to process individual drum sounds separately.
• TELEFÒN: Connect stereo headphones to the 1/4-inch TRS PHONES jack for monitoring.

3.4 Koneksyon MIDI ak USB

The RD-6 supports MIDI and USB for integration with other musical equipment and computers:

• MIDI ANTRE/SÒTI/TRAVÈSE: Use standard 5-pin MIDI cables to connect the RD-6 to other MIDI devices. MIDI IN receives clock and note data, MIDI OUT sends internal clock and pattern data, and MIDI THRU passes through incoming MIDI data.
• USB: Connect a USB cable from the RD-6's USB port to your computer for MIDI communication and firmware updates.

3.5 Trigger Outputs

The RD-6 features two Deklanche SOTI jacks (1/8-inch TS) that can send trigger pulses to control external modular synthesizers or other compatible equipment.

Figure 1: Rear panel connections of the Behringer RD-6. This image displays the DC input, MIDI IN/OUT/THRU, USB port, MIX OUT, individual VOICE OUTs, and START/STOP jack.

4. Operasyon

4.1 Front Panel Overview

The front panel of the RD-6 provides access to all controls for sound generation, sequencing, and performance.

Figure 2: Behringer RD-6 front panel. This image shows the tempo knob, accent control, individual drum voice controls, mode selector, step buttons, and distortion section.

4.2 vwa tanbou

The RD-6 features eight distinct analog drum voices:

• Bass Drum (BD): Controls for tone and decay.
• Snare Drum (SD): Controls for tone and snare level.
• Low Tom (LT) / High Tom (HT): Shared controls for tone and decay.
• Cymbal (CY) / Clap (CP): Shared controls for level.
• Open Hat (OH) / Closed Hat (CH): Shared controls for level.

Each voice has a dedicated level knob. The aksan knob globally controls the intensity of accented steps.

4.3 Sequencing

The RD-6 features a 16-step sequencer for creating drum patterns.

1. Chwazi Enstriman: Peze a ENSTRIMAN button and then one of the 8 instrument buttons (BD, SD, LT/HT, CY/CP, OH/CH) to select the drum voice you wish to program.
2. Chwazi mòd: Vire a MÒD bouton pou WRITE PATTERN.
3. Antre Etap yo: Peze a ETAP buttons (1-16) to activate or deactivate the selected instrument on that step. An illuminated LED indicates an active step.
4. Add Accent: While in WRITE PATTERN mode, hold the aksan button and press a STEP button to add an accent to that step.
5. Save Pattern: After programming, turn the MÒD bouton pou PLAY PATTERN. The pattern is automatically saved.
6. Kòmanse/Stop: Peze a KÒMANSE/KANPE button to begin or end pattern playback.
7. Tempo: Adjust the playback speed using the TEMPO bouton.

4.4 Pattern Chaining

You can chain multiple patterns to create longer sequences or full songs. The RD-6 supports chaining up to 250 bars.

4.5 Distòsyon

The RD-6 includes a built-in distortion effect. Use the DISTORSYON ON/OFF switch to activate it. Adjust the TON epi NIVO knobs to shape the distortion effect.

5. Antretyen

5.1 Netwayaj

Clean the unit with a soft, dry cloth. Do not use liquid cleaners or solvents. Ensure the unit is powered off and unplugged before cleaning.

5.2 Depo

When not in use for extended periods, store the RD-6 in a cool, dry place, away from direct sunlight and extreme temperatures. It is recommended to use the original packaging for storage and transport.

NAN. Depanaj

7. Espesifikasyon

8. Garanti ak sipò

Pou enfòmasyon detaye sou garanti a ak sipò teknik, tanpri al gade paj ofisyèl Behringer la. websit la oubyen kontakte distribitè lokal ou a. Kenbe prèv acha ou pou reklamasyon garanti.