WORKPRO 12V Pink Cordless Drill and Home Tool Kit User Manual

1. Enfòmasyon enpòtan sou sekirite

Toujou li epi konprann tout avètisman sekirite, enstriksyon, ilistrasyon, ak espesifikasyon ki vini ak zouti elektrik sa a. Si ou pa swiv tout enstriksyon ki anba yo, sa ka lakòz chòk elektrik, dife, ak/oswa blesi grav.

• Kenbe zòn travay pwòp epi byen limen. Zòn ankonbre oswa nwa yo envite aksidan.
• Pa opere zouti elektrik nan atmosfè eksplozif, tankou nan prezans likid ki ka pran dife, gaz oswa pousyè. Zouti elektrik kreye etensèl ki ka limen pousyè oswa lafimen.
• Kenbe timoun yo ak moun ki t ap gade yo lwen pandan w ap opere yon zouti elektrik. Distraksyon ka lakòz ou pèdi kontwòl.
• Mete ekipman pwoteksyon pèsonèl apwopriye, tankou linèt sekirite, pwoteksyon tande, ak gan.
• Ensure the drill driver is fully charged before initial use to ensure optimal performance and safety.
• All tools in this kit meet or exceed ANSI (American National Standards Institute) specifications for added safety.

2. Pwodwi souview ak Konpozan

The WORKPRO 12V Pink Cordless Drill and Home Tool Kit is a comprehensive 61-piece set designed for DIY projects and home maintenance. It includes a powerful cordless drill and a variety of essential hand tools, all neatly organized in a portable storage bag.

Figi 2.1: Plis paseview of the WORKPRO 61-piece Pink Cordless Drill and Home Tool Kit, including the drill, hand tools, and storage bag.

2.1 Cordless Drill Components

Figure 2.2: Detailed diagram illustrating the key components of the 12V Cordless Drill, including the chuck, torque adjustment collar, 2-speed gear control, LED light, variable speed switch, battery capacity indicator, forward/reverse rotation control, soft grip handle, battery pack release button, and battery pack.

• Chuck: Holds drill bits and screwdriver bits.
• Kolye Ajisteman Koupl: Pèmèt seleksyon 18+1 paramèt koupl pou divès aplikasyon.
• 2-Speed Gear Control: Switches between low speed (0-400 RPM) for driving screws and high speed (0-1500 RPM) for drilling.
• Limyè ki ap dirije: Eklere zòn travay la pou pi bon vizibilite.
• Variable Speed Switch: Controls the drill's speed based on pressure applied.
• Endikatè kapasite batri: Montre chaj batri ki rete a.
• Forward/Reverse Rotation Control: Changes the direction of rotation for drilling or removing screws.
• Manch grip mou: Bay yon manyen konfòtab ak an sekirite.
• Battery Pack Release Button: Used to detach the battery pack.
• Pake batri: 12V Lithium-ion battery, with an extra 2AH battery included for replacement.

2.2 Hand Tool Components

Figure 2.3: A selection of the hand tools included in the kit, such as a hammer, utility knife, measuring tape, level, pliers, and adjustable wrench, along with various drill bits and screwdriver bits.

The kit includes a comprehensive selection of hand tools for various household tasks:

• Grif mato
• Measuring Tape (3M/10ft)
• Kouto itilite
• Nivo Lespri Bondye
• Glise pens jwenti
• Kle reglabl
• Asòti Drill Bits
• Bits tournevis asòti
• And other essential accessories.

3. Enstalasyon ak Asanble

3.1 Chaje batri a

The 12V Lithium-ion battery should be fully charged before its first use to ensure optimal performance and battery longevity. Use only the WORKPRO 12V Li-ion Charger provided with the kit.

Figure 3.1: The 12V Lithium-ion battery pack connected to its charger for recharging.

1. Konekte chargeur a nan yon priz kouran estanda.
2. Insert the battery pack into the charger. Ensure it clicks into place securely.
3. Allow the battery to charge until the indicator light on the charger signals a full charge (refer to charger manual for specific indicator details).
4. Yon fwa li chaje, dekonekte batri a nan plato a epi debranche plato a nan priz la.

3.2 Enstale/Retire Pak Batri a

1. To install: Align the battery pack with the base of the drill handle and slide it in until it clicks securely into place.
2. To remove: Press the battery pack release button located on the side of the battery pack and slide the battery out of the drill handle.

3.3 Enstale Mòso Perçage/Tounvis

Figi 3.2: Close-up view of the keyless chuck, demonstrating how to open and close it to insert or remove drill and screwdriver bits.

1. Vire mandrin lan nan sans kontrè ak zegwi mont lan pou louvri machwè yo.
2. Mete ti bout perçage a oswa ti bout tournevis ou vle a nan mandrin lan.
3. Vire mandrin lan nan sans zegwi mont lan pou sere machwa yo byen sere otou mèch la. Asire w mèch la santre epi byen kenbe.

4. Operasyon Enstriksyon

4.1 Variable Speed and Torque Adjustment

The drill features a variable speed trigger and a 2-speed gear control, along with an 18+1 position torque adjustment collar, allowing precise control for various tasks.

Figure 4.1: Illustration of the 2-speed transmission, recommending 0-1500 RPM for drilling and 0-400 RPM for screwdriving applications.

• Seleksyon vitès: Use the 2-speed gear control switch on top of the drill.
  • Position '1' (Low Speed): 0-400 RPM, ideal for driving screws and applications requiring higher torque.
  • Position '2' (High Speed): 0-1500 RPM, suitable for drilling into various materials.
• Ajisteman koupl: Rotate the torque adjustment collar to select the desired torque setting (1-18) or the drill mode.
  • Lower settings (1-5) are for small screws or soft materials.
  • Higher settings (6-18) are for larger screws or harder materials.
  • The drill icon setting is for drilling applications, providing maximum torque.
• Deklanche vitès varyab: The speed of the drill is controlled by the amount of pressure applied to the trigger switch. Pressing further increases the speed.

4.2 Operasyon Avanse/Aryè

The forward/reverse rotation control switch is located above the trigger. Push the switch to the left for forward rotation (drilling/driving) and to the right for reverse rotation (removing screws/bits). Center position locks the trigger for safety.

4.3 Sèvi ak limyè ki ap dirije a

Figure 4.2: The integrated LED light on the drill illuminating a dark work area, enhancing visibility during operation.

The integrated LED light automatically illuminates when the trigger is pressed, providing improved visibility in dimly lit work areas.

4.4 General Use of Hand Tools

The hand tools included in this kit are designed for common household tasks. Always select the correct tool for the job and ensure it is used safely and correctly.

Figure 4.3: A person using the WORKPRO hammer to secure a frame, demonstrating typical use of the hand tools.

Figure 4.4: A person using the WORKPRO cordless drill to assemble furniture, showcasing the drill's utility for common home projects.

• mato: Use for driving and pulling nails. Ensure a firm grip and clear swing path.
• Mezire tep: For accurate measurements. Extend carefully and retract slowly.
• Kouto itilite: For cutting various materials. Always extend blade only as needed and retract fully after use. Use with caution.
• Spirit Level: For checking horizontal and vertical alignment.
• Pliers/Wrench: For gripping, bending, or turning objects. Ensure a secure grip to prevent slipping.

5. Antretyen

5.1 Netwayaj

• Always disconnect the battery pack from the drill before cleaning.
• Sèvi ak yon mou, damp cloth to wipe down the exterior of the drill and hand tools. Do not use harsh chemicals or abrasive cleaners.
• Kenbe ouvèti vantilasyon yo pwòp de pousyè ak debri pou anpeche yo chofe twòp.

5.2 Swen ak Depo Batri

• Sere pil yo nan yon kote ki fre, sèk, lwen limyè solèy la dirèk ak tanperati ekstrèm.
• Pou depo alontèm, chaje batri a apeprè 50% kapasite li.
• Do not store batteries in a discharged state to prevent deep discharge and damage.
• The portable storage bag is ideal for organizing and protecting all tools when not in use.

NAN. Depanaj

7. Espesifikasyon

8. Garanti ak sipò

For information regarding product warranty, returns, or technical support, please refer to the warranty card included with your purchase or visit the official WORKPRO website. Contact details for customer service are typically provided on the manufacturer's packaging or websit.

WORKPRO Tools is committed to quality and customer satisfaction.