Pwodwi souview
The Feit Electric FC8/3CCT/LED is an 8-inch non-dimmable LED circline light bulb designed for indoor use. This bulb offers selectable color temperatures, allowing users to choose between Warm White, Cool White, or Daylight settings using an integrated switch. It provides 1400 lumens of light output with a 15-watt input power and is rated for 25,000 life hours at 120V.
Karakteristik kle yo enkli:
- Compact circline design for efficient illumination.
- Easy plug-and-play installation, eliminating the need to replace or remove old ballasts.
- Three selectable color temperatures: Neutral White (3500K), Cool White (4000K), or Daylight (6500K).
- Energy-efficient LED technology with a long lifespan.
- 1400 Lumens brightness, 15 Watt power consumption, 120V operation.
Enfòmasyon sou Sekirite
- AVÈTISMAN: Risk pou chòk elektrik. Dekonekte kouran an anvan enstalasyon oswa antretyen.
- Do not use with dimmers. This bulb is non-dimmable.
- Ensure the fixture is rated for the bulb's voltage (120V).
- Pa demonte anpoul la. Pa gen pyès ki ka sèvi ak li anndan l.
- Apwopriye pou damp locations, but not for direct exposure to water.
Enstalasyon ak Enstalasyon
This LED circline bulb is designed for easy replacement of existing fluorescent circline lamps without requiring ballast removal or rewiring. Follow these steps for proper installation:
- Etenn pouvwa: Before beginning installation, ensure the power to the light fixture is completely turned off at the circuit breaker or fuse box.
- Retire ansyen anpoul: Carefully remove the existing fluorescent circline lamp soti nan aparèy la.
- Chwazi Tanperati Koulè: Locate the integrated switch on the side of the Feit Electric FC8/3CCT/LED bulb. Before installing, slide the switch to your desired color temperature: Neutral White (3500K), Cool White (4000K), or Daylight (6500K). Note: This switch is difficult to access once installed, so select your preferred color before installation.
- Enstale nouvo anpoul: Insert the pins of the new LED circline bulb into the lamp holder of your fixture. Ensure it is securely seated.
- Retabli pouvwa: Yon fwa anpoul la byen enstale, retabli kouran an nan aparèy la.
Image: Feit Electric FC8/3CCT/LED circline bulb with its integrated switch for color temperature selection. The switch allows selection between Neutral White (3500K), Cool White (4000K), and Daylight (6500K) before installation.
Image: Product packaging for the Feit Electric 8-inch Circular Lamp, highlighting its selectable white feature and key specifications like 15W power usage, 1400 lumens, and T9 replacement.
Enstriksyon Operasyon
Once installed, the Feit Electric FC8/3CCT/LED bulb operates like a standard light bulb. Use your existing wall switch to turn the light fixture on or off.
- Seleksyon Tanperati Koulè: The desired color temperature (Warm White, Cool White, or Daylight) must be selected using the switch on the bulb itself anvan installation. It cannot be changed via the wall switch.
- Ki pa dimmable: This bulb is not compatible with dimmer switches. Using it with a dimmer may cause damage to the bulb or the dimmer, and will void the warranty.
Antretyen
The Feit Electric FC8/3CCT/LED bulb requires minimal maintenance.
- Netwayaj: Ensure the power is off before cleaning. Wipe the bulb with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
- Ranplasman: Due to its long lifespan, frequent replacement is not expected. When replacement is necessary, follow the "Setup and Installation" steps in reverse to remove the old bulb and install a new one.
Depanaj
If you experience issues with your Feit Electric FC8/3CCT/LED bulb, refer to the following common problems and solutions:
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Anpoul pa limen. | Pa gen pouvwa nan aparèy la. Bulb not properly installed. Anpoul defo. | Tcheke disjoncteurs/fuse. Ensure bulb pins are fully seated in the lamp detantè. Test bulb in a known working fixture or replace. |
| Limyè a ap tranble oubyen li fèb. | Entèriptè gradatè ki pa konpatib. Koneksyon ki lach. | This bulb is non-dimmable. Remove any dimmer switches and use a standard on/off switch. Re-seat the bulb firmly. |
| Tanperati koulè ki pa kòrèk. | Switch CCT a pa byen regle. | Turn off power, remove bulb, and adjust the CCT switch to the desired setting before re-installing. |
Espesifikasyon
| Spesifikasyon | Valè |
|---|---|
| Non modèl | FC8/3CCT/LED |
| Mak | Feit elektrik |
| Kalite limyè | dirije |
| Karakteristik espesyal | Non Dimmable, Selectable Color Temperature |
| Wattage | 15 Watts |
| Enkandesan ekivalan Wattage | 22 Watts |
| Gwosè fòm anpoul | FC8 (8-inch Circline) |
| Baz anpoul | GX53 |
| Voltage | 120 Volts |
| Klète | 1400 Lumen |
| Opsyon Tanperati Koulè | Neutral White (3500K), Cool White (4000K), Daylight (6500K) |
| Mwayèn lavi | 25,000 Hours (approx. 2.86 Years) |
| Itilizasyon Andedan kay la / Deyò | Indoor (Suitable for Damp Kote yo) |
| Materyèl | Plastik |
| Dimansyon pwodwi | 8" lajè x 8" wotè x 1.5" pwofondè |
| Sètifikasyon | ETL Listed, FCC Compliant |
Garanti ak sipò
For warranty information regarding your Feit Electric FC8/3CCT/LED bulb, please refer to the documentation included with your purchase or visit the official Feit Electric websit.
If you require further assistance, technical support, or have questions not covered in this manual, please contact Feit Electric customer service directly. Contact details can typically be found on the product packaging or their official websit.
Feit Electric Official Websit: www.feit.com
