Entwodiksyon
This manual provides comprehensive instructions for the installation, operation, and maintenance of the HID Signo 40 40TKS-00-000000 Multi-Technology, Mobile Ready Smart Card Reader. The Signo 40 is designed for secure electronic access control, offering versatility and advanced connectivity for various credential technologies.
Enfòmasyon sou Sekirite
Please read all safety instructions before installing or operating the device. Failure to follow these instructions may result in injury, damage to the device, or void the warranty.
- Asire w ke pouvwa a dekonekte anvan enstalasyon oswa antretyen.
- Enstalasyon ta dwe fèt pa pèsonèl kalifye sèlman.
- Do not expose the device to extreme temperatures, moisture, or corrosive environments.
- Sèvi sèlman ak akseswa ak ekipman pouvwa ki apwouve.
Kontni pake
Verifye ke tout atik yo prezan nan pakè a:
- HID Signo 40 Smart Card Reader
- Montaj pyès ki nan konpitè (vis, lank)
- Gid enstalasyon (dokiman sa a)
Enstalasyon ak Enstalasyon
The HID Signo 40 reader is designed for wall switch mounting applications. Follow these steps for proper installation:
1. Enstalasyon Lektè a
- Choose a suitable location for wall switch mounting.
- Secure the mounting plate (if applicable) to the wall using the provided hardware.
- Attach the reader securely to the mounting plate or directly to the wall box.
Image: The HID Signo 40 Smart Card Reader, typically mounted on a wall for access control. This image shows the sleek design suitable for wall switch applications.
2. Koneksyon fil elektrik
The Signo 40 features a terminal strip wiring option for secure and reliable connections.
- Refer to the wiring diagram provided with the reader for specific pin assignments.
- Connect power, data (OSDP), and any auxiliary inputs/outputs to the terminal strip.
- Asire w ke tout koneksyon an sekirite epi izole.
3. Premye Limen ak Konfigirasyon
Once wired, apply power to the reader. The reader will perform a self-test. For advanced configuration, including OSDP settings and credential profiles, refer to the HID Signo Configuration Guide available on the HID Global websit.
Enstriksyon Operasyon
The HID Signo 40 reader supports a wide range of credential technologies.
1. Presenting Credentials
- Physical Cards/Fobs: Present your compatible smart card or fob directly to the reader's surface.
- Mobile Devices (HID Mobile Access): Ensure your mobile device has HID Mobile Access enabled via Bluetooth or NFC. Present the device near the reader.
- Apple Wallet (ECP): For credentials stored in Apple Wallet, ensure Enhanced Contactless Polling (ECP) is active on your device and present it to the reader.
The reader will indicate a successful read (e.g., LED indicator change, audible beep) if the credential is valid.
2. Read Range Optimization
The Signo 40 features surface detection for automatic recalibration and optimization of read range performance. This ensures consistent and reliable credential reading.
Antretyen
The HID Signo 40 reader is designed for minimal maintenance.
- Netwayaj: Use a soft, dry cloth to clean the reader's surface. Avoid abrasive cleaners or solvents.
- Mizajou mikrolojisyèl: The reader is designed for remote management, allowing for firmware updates without physical interaction. Consult your system administrator or HID Global documentation for details on remote updates.
- Enspeksyon: Periodically inspect the reader and its connections for any signs of damage or wear.
Depanaj
If you encounter issues with your HID Signo 40 reader, consider the following:
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Reader not powering on. | Pa gen kouran oswa fil elektrik yo pa kòrèk. | Tcheke koneksyon kouran yo epi asire w ke vòltaj la kòrèk.tage. Verify wiring to the terminal strip. |
| Credential not recognized. | Invalid credential, incorrect presentation, or reader configuration issue. | Ensure the credential is valid and compatible. Present the credential correctly. Consult system administrator for reader configuration. |
| Short read range. | Environmental interference or reader recalibration needed. | Ensure no metallic objects are interfering with the reader. The reader should automatically recalibrate; if not, check for obstructions. |
For persistent issues, contact HID Global technical support or your system integrator.
Espesifikasyon
| Karakteristik | Detay |
|---|---|
| Dimansyon pwodwi | 7.2 x 4.84 x 1.73 pous |
| Pwa atik | 12 ons |
| Manifakti | HID |
| Nimewo Modèl | Signo 40 |
| Koneksyon | Bluetooth, NFC, OSDP |
| Sipò kalifikasyon | Cards, Fobs, Mobile Devices (HID Mobile Access, Apple ECP) |
| Fil elektrik | Tèminal Strip |
Garanti ak sipò
HID Global products are backed by a limited warranty. For specific warranty terms and conditions, please refer to the official HID Global websit la oubyen kontakte pwen acha ou a.
For technical assistance, product support, or to report issues, please visit the HID Global Support Portal or contact your authorized HID Global distributor.
