1. Entwodiksyon
The INKBIRDPLUS INK-IFT01 is a non-contact infrared thermometer designed for accurate surface temperature measurements across a wide range of applications. It features a 12:1 distance-to-spot ratio, adjustable emissivity, and a clear backlit LCD display for convenient use. This manual provides essential information for the safe and effective operation of your device.
Figure 1: INKBIRDPLUS INK-IFT01 Infrared Thermometer
2. Enfòmasyon sou Sekirite
Tanpri li tout avètisman sekirite yo ak anpil atansyon anvan ou itilize aparèy la.
- This infrared thermometer is intended for measuring surface temperatures only. It is not designed for use on humans or animals, and readings obtained from such applications will be inaccurate.
- Do not attempt to measure the internal temperature of any object with this device.
- Never irradiate human eyes directly or indirectly with the laser beam at any time. Direct exposure can cause eye damage.
- Kenbe aparèy la lwen timoun yo.
- Do not use the device in environments with explosive gases, vapor, or dust.
- Avoid exposing the device to extreme temperatures, humidity, or direct sunlight for prolonged periods.
3. Pwodwi souview
Familiarize yourself with the main components of your INKBIRDPLUS INK-IFT01 thermometer:
Figure 2: Labeled components of the INKBIRDPLUS INK-IFT01
- Laser Hole: Emits the targeting laser.
- Capteur enfrawouj: Detects infrared radiation for temperature measurement.
- Ekran LCD: Displays temperature readings, battery status, and other indicators.
- ℃/℉/Down Button: Used to switch between Celsius and Fahrenheit, and for navigating menus.
- Function Button (MODE): Accesses settings and modes.
- Laser/Up Button: Toggles the laser on/off and for navigating menus.
- Deklanche: Activates the measurement.
- Lòj batri: Li gen yon pil 9V ladan l.
4. Enstalasyon
4.1 Enstalasyon batri
The INKBIRDPLUS INK-IFT01 requires one 9V 6F22 battery for operation. A new battery can provide approximately 12 months of continuous use.
- Jwenn kouvèti konpatiman pil la sou manch tèmomèt la.
- Gently pull the cover downwards to open the compartment.
- Insert a 9V battery, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Fèmen kouvèti konpatiman batri a jiskaske li fè yon klik byen fèm nan plas li.
Figure 3: Battery installation process
5. Operasyon
5.1 Pran yon mezi
- Dirije tèmomèt la sou sifas sib la.
- Press and hold the trigger to activate the laser and begin live temperature readings. The laser dot indicates the center of the measurement area.
- Release the trigger to hold the current temperature reading on the display. The reading will remain on the screen for a short period before the device automatically powers off to save energy.
Figure 4: Trigger usage for live and locked readings
5.2 Rapò distans ak pwen (D:S)
The INK-IFT01 has a Distance to Spot Ratio of 12:1. This means that at a distance of 12 units from the target, the measurement spot diameter will be 1 unit. For example, if you are 12 inches away from the target, the measurement area will be 1 inch in diameter. To ensure accurate readings, make sure the target area is larger than the spot size.
Figure 5: Understanding Distance to Spot Ratio
5.3 Chanjman Inite Tanperati (℃/℉)
To switch between Celsius (℃) and Fahrenheit (℉), press the dedicated ℃/℉/Down Button located below the LCD screen. The display will update to show the selected unit.
5.4 Emisivite reglabl
Emissivity is a measure of an object's ability to emit infrared energy. Different materials have different emissivities. The INK-IFT01 allows you to adjust the emissivity from 0.1 to 1.0 to improve measurement accuracy for various surfaces. To adjust emissivity, press the MÒD button to enter the emissivity setting, then use the Up epi Desann bouton pou chanje valè a.
Refer to the following table for common emissivity values:
| Materyèl | Emisyon |
|---|---|
| Aliminyòm (oksidize) | 0.20 - 0.40 |
| Brass (oxidized) | 0.61 |
| Iron (oxidized) | 0.78 - 0.82 |
| Kuiv (oksidize) | 0.78 |
| Penti (mat) | 0.92 - 0.96 |
| Dlo | 0.93 - 0.96 |
| Bwa | 0.90 - 0.95 |
| Konkrè | 0.94 |
Note: This is a partial list. For a comprehensive emissivity table, please refer to the full product manual.
5.5 Multiple Applications
The INKBIRDPLUS INK-IFT01 is suitable for various non-contact temperature measurement tasks, including:
- Cooking and BBQ (surface temperature of grills, ovens, food)
- Automotive diagnostics (engine components, tires)
- Industrial maintenance (electrical panels, machinery)
- Home inspections (HVAC, insulation, refrigerators)
Figi 6: Egzamples of thermometer applications
6. Antretyen
6.1 Netwayaj
- Pou netwaye aparèy la, sèvi ak yon mou, damp twal. Pa sèvi ak pwodui netwayaj abrazif oswa solvang.
- For the lens, use a soft cloth or cotton swab with a small amount of rubbing alcohol. Allow the lens to dry completely before use.
- Asire w pa gen likid ki antre nan aparèy la casing.
6.2 Depo
- When not in use, store the thermometer in a dry, cool place, away from direct sunlight and extreme temperatures.
- If storing for an extended period, remove the battery to prevent leakage and damage to the device.
NAN. Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Pa gen ekran/Aparèy la pa limen | Batri ki ba oswa ki mouri; Enstalasyon batri ki pa kòrèk | Replace the 9V battery; Ensure battery is inserted with correct polarity. |
| Lekti kòrèk | Incorrect emissivity setting; Distance to spot ratio too large; Lens is dirty; Device not calibrated (unlikely for user) | Adjust emissivity for the target material; Move closer to the target; Clean the lens; Contact customer support if issues persist. |
| Cannot switch between ℃/℉ | Incorrect button press; Software glitch | Ensure you are pressing the dedicated ℃/℉/Down Button. If the issue persists, try removing and reinserting the battery. |
| Lazè pa travay | Laser is turned off; Malfunction | Peze a Laser/Up Button to toggle the laser. If it still doesn't work, contact customer support. |
8. Espesifikasyon
| Karakteristik | Detay |
|---|---|
| Non modèl | INK-IFT01 |
| Ranje Mezi | -58 ℉ ~ 1022 ℉ / -50 ℃ ~ 550 ℃ |
| Presizyon | ±2% or ±2℃ (whichever is greater) |
| Distans ak Rapò Tach (D:S) | 12:1 |
| Emisyon | Reglabl soti nan 0.1 a 1.0 |
| Tan repons | 0.5 segonn |
| Kalite ekspozisyon | Retroeklere LCD |
| Sous pouvwa | 9V 6F22 Battery (approx. 12 months life) |
| Tanperati Fonksyònman | 0 a 50 ℃ (32 ~ 122 ℉) |
| Tanperati Depo | -20 a 50 ℃ (-4 ~ 122 ℉) |
| Pwa atik | 190 g |
| Dimansyon (apeprè) | 14 cm (Longè) |
| Konpozan ki enkli | INKBIRD Infrared Thermometer Gun INK-IFT01 |
9. Garanti & Sipò
9.1 Enfòmasyon sou Garanti
INKBIRDPLUS products are manufactured to high-quality standards and are warranted against manufacturing defects. Please refer to the warranty card included with your product or visit the official INKBIRD websit la pou wè tèm ak kondisyon garanti detaye yo.
9.2 Sipò pou Kliyan
If you encounter any issues or have questions regarding your INKBIRDPLUS INK-IFT01 Infrared Thermometer, please contact our customer support team. Contact details can typically be found on the INKBIRD official websit la oubyen sou anbalaj pwodwi a.
Pou resous sou entènèt, vizite: www.inkbird.com
