1. Entwodiksyon
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Axton A601 6-Channel Digital Power Amplifier. The Axton A601 is designed to deliver high-quality audio performance in a compact form factor, featuring Class-D technology for efficiency and an aluminum heatsink for optimal heat dissipation. It is fully compatible with vehicles equipped with start/stop automatic systems.
Figi 1: Devan view of the Axton A601 amplaviyè, montreasing konsepsyon elegant ak kontra enfòmèl ant li yo.
2. Enstalasyon ak Enstalasyon
Proper installation is crucial for optimal performance and safety. Ensure the vehicle's battery is disconnected before beginning installation.
2.1. Koneksyon
- Koneksyon pouvwa: Connect the +12V terminal to the positive terminal of the car battery via a fuse. Connect the GND terminal to a clean, unpainted metal point on the vehicle chassis. Connect the REM (Remote) terminal to the remote output of your head unit.
- Koneksyon Antre: La amplifier supports both High-Level and Low-Level inputs. Use the appropriate input based on your head unit's output.
- Rezilta Oratè: Connect your speakers to the designated channels (CH1/2, CH3/4, CH5/6). The amplifier also supports bridged mode for higher power output to specific channels (e.g., subwoofers).
Figi 2: Top view of the Axton A601, showing power, remote, ground, and speaker output terminals.
Figi 3: Anba view of the Axton A601, illustrating input connections and control knobs for sensitivity, crossover, and bass boost.
2.2. Inisyal Konfigirasyon
- Mòd Antre: Select the correct input mode (High-Level or Low-Level) based on your connection type.
- Limen mòd: La amplifier features Auto-Turn-On via DC-Offset or Music Signal, eliminating the need for a separate remote wire in some installations.
- Anviwònman kwazman: Adjust the integrated electronic crossover filters (LPF for subwoofers, HPF for satellites) to optimize sound reproduction for your speaker setup.
- 12 dB/Oct. Low-Pass Filter (Subwoofer): 50 – 300 Hz
- 12 dB/Oct. High-Pass Filter (Satellites): 50 Hz
- Sensitivity (Gain): Set the input sensitivity to match the output voltage of your head unit. Start with the minimum setting and gradually increase until desired volume is achieved without distortion.
- Kontwòl pou ranfòse bas: Adjust the bass boost at 45 Hz (0 – 12 dB) to enhance low-frequency response.
3. Operasyon Enstriksyon
Once installed and configured, the Axton A601 operates automatically with your vehicle's audio system.
- Limen/Etenyen: La amplifier will power on automatically when it receives a signal (either remote, DC-offset, or music signal) and power off when the signal is removed.
- Lektur odyo: Play audio through your head unit. Adjust the volume and tone controls on your head unit as usual.
- Bass Level Remote Control: Use the included bass level remote control to conveniently adjust the subwoofer output level from your listening position.
4. Antretyen
To ensure the longevity and optimal performance of your Axton A601 amplifier, swiv gid antretyen senp sa yo:
- Netwayaj: Regilyèman siye a amplifier's exterior with a soft, dry cloth to remove dust and dirt. Do not use liquid cleaners or solvents.
- Vantilasyon: Asire w ke amplifier's heatsink fins are not obstructed. Proper airflow is essential for heat dissipation.
- Koneksyon: Periodically check all power, ground, remote, and speaker connections to ensure they are secure and free from corrosion. Loose connections can lead to performance issues or damage.
- Anviwònman: Evite ekspoze a amplifier to excessive moisture, direct sunlight, or extreme temperatures.
NAN. Depanaj
If you experience issues with your Axton A601 amplifikè, konsilte gid depanaj sa a anvan ou chèche asistans pwofesyonèl.
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Pa gen kouran / Amplifier pa limen |
|
|
| Pa gen Sòti Son |
|
|
| Son defòme / Bri |
|
|
| Ampsurchof lifter |
|
|
6. Espesifikasyon
Detailed technical specifications for the Axton A601 6-Channel Digital Power Amplifier:
| Karakteristik | Spesifikasyon |
|---|---|
| Nimewo Modèl | A601 |
| Kantite Chanèl | 6 |
| Output Power @ 4 Ohm | 6 x 100 W |
| Output Power @ 2 Ohm | 6 x 160 W |
| Output Power @ 4 Ohm Bridged | 3 x 320 W |
| Repons Frekans | 10 Hz - 21 kHz |
| Siyal-a-bwi Pwopòsyon | > 86 dB |
| Variable Input Sensitivity | 0.5 - 12 V |
| Integrated Electronic Crossover | 12 dB/Oct. LPF (50 – 300 Hz), 12 dB/Oct. HPF (50 Hz) |
| Bass Booste Kontwòl | @ 45 Hz (0 – 12 dB) |
| Dimansyon (W x H x P) | 282 x 40 x 105 mm |
| Voltage | 10 Volts |
| Materyèl | Aliminyòm |
| Konfòmite | CE |
Figure 4: Excerpt from the official manual, detailing the technical specifications of the Axton A601 amplifier.
7. Garanti ak sipò
Warranty information for the Axton A601 amplifier is not provided in this manual. For detailed warranty terms, technical support, or service inquiries, please refer to the manufacturer's official websit (www.axton.de) or contact your authorized Axton retailer.
