1. Entwodiksyon
Thank you for choosing the AmmToo LED Motion Sensor Night Light. This manual provides essential information for the safe and efficient use of your new night lights. Designed for convenience and energy efficiency, these lights offer warm white illumination and automatic activation based on motion detection in low-light conditions.
2. Pwodwi Features
- Ekleraj blan cho: Provides a soft, non-glaring light (3200K - 2800K) for comfortable visibility in the dark.
- PIR Mouvman Capteur: Automatically detects movement within a 3-meter range and 120-degree angle.
- Otomatik On/Off: Lights turn on when motion is detected in darkness and turn off after 30 seconds of no movement.
- Capteur limyè: Ensures the light only activates in dark conditions, saving energy during the day.
- Enèji efikas: Low power consumption of 0.5W, powered by 3 AAA batteries (not included).
- Long Lifespan: LED lifespan of up to 50,000 hours.
- Konsepsyon kontra ak pòtab: Slim and lightweight, suitable for various indoor locations.
- Enstalasyon fasil: Mounts easily with double-sided adhesive tape, no tools required.
3. Pake kontni
The AmmToo LED Motion Sensor Night Light package includes:
- 4 x AmmToo LED Motion Sensor Night Lights
- 4 x kousinen adezif doub-bò
- 1 x Manyèl Itilizatè (dokiman sa a)
Image: Four AmmToo LED Motion Sensor Night Lights, showing the compact design and integrated motion sensor.
Image: The complete package contents, including four night lights, adhesive mounting pads, and the instruction manual.
4. Enstalasyon ak Enstalasyon
Follow these steps to set up and install your AmmToo LED Motion Sensor Night Light:
- Mete pil:
- Gently slide the back cover of the night light to open it.
- Insert 3 AAA batteries (not included) into the battery compartment, ensuring correct polarity (+/-).
- Fèmen kouvèti dèyè a byen.
Image: A visual guide demonstrating how to open the back cover, insert 3 AAA batteries, apply the adhesive, and mount the light.
- Chwazi Kote Enstalasyon:
- Select a smooth, clean, and dry surface for mounting.
- Consider areas where you need light in the dark, such as hallways, staircases, bathrooms, bedrooms, or inside cabinets.
- Attach Adhesive Pad:
- Peel off one side of the double-sided adhesive pad.
- Firmly attach it to the back of the night light.
Image: A hand applying the circular 3M adhesive pad to the back of the night light, preparing it for mounting.
- Monte limyè a:
- Peel off the other side of the adhesive pad.
- Press the night light firmly onto the chosen surface for at least 30 seconds to ensure a strong bond.
No screws or tools are required for installation.
5. Operasyon Enstriksyon
The AmmToo LED Motion Sensor Night Light operates automatically:
- Aktivasyon otomatik: The built-in light sensor detects ambient light levels. The motion sensor will only become active when the environment is dark.
- Deteksyon Mouvman: When motion is detected within a 3-meter (10 feet) range and a 120-degree angle in a dark environment, the night light will automatically turn on.
- Dezaktivasyon otomatik: If no further motion is detected for approximately 30 seconds, the night light will automatically turn off to conserve battery life.
Image: A diagram illustrating the automatic illumination feature, showing the light activating only in darkness upon motion detection and turning off after 30 seconds.
Image: A three-panel image demonstrating the light sensor preventing activation in daylight, auto-on by motion sensor in darkness, and auto-off after 20 seconds of no motion.
6. Antretyen
- Ranplasman batri: When the light dims or stops functioning, it's time to replace the batteries. Open the back cover, remove the old AAA batteries, and insert new ones, observing polarity.
- Netwayaj: Wipe the surface of the night light with a soft, dry cloth. Do not use abrasive cleaners or immerse the device in water.
- Depo: If storing the night lights for an extended period, remove the batteries to prevent leakage.
NAN. Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Limyè pa limen. |
|
|
| Limyè a rete limen tout tan. |
|
|
| Motion detection is inconsistent. |
|
|
| Lakòl la pa kenbe. |
|
|
8. Espesifikasyon
| Mak: | AmmToo |
| Nimewo Modèl: | ZN01 |
| Dimansyon (L x W x H): | 6.4 x 4.4 x 2.7 cm (2.52 x 1.73 x 1.06 pous) |
| Pwa: | 120 g (per light) |
| Sous pouvwa: | 3 x AAA pil (pa enkli) |
| Konsomasyon pouvwa: | 0.5 W |
| Koulè limyè: | Warm White (3200K - 2800K) |
| Kalite Capteur: | PIR Motion Sensor, Light Sensor |
| Ranje deteksyon: | Jiska 3 mèt (10 pye) |
| Ang deteksyon: | 120 degre |
| Auto-off Time: | Approx. 30 seconds after last motion detected |
| Viv lavi: | Jiska 50,000 èdtan |
| Materyèl: | Akrilonitrile butadien stirèn (ABS) |
| Kalite enstalasyon: | Wall Mount (adhesive) |
9. Garanti & Sipò
Specific warranty information is not provided in the product details. For any product inquiries, technical support, or warranty claims, please refer to the retailer or contact AmmToo customer service through their official channels.
Please retain your purchase receipt for any warranty-related issues.
