Jetson Highlight 2-Wheel Light-Up Kick Scooter User Manual

1. Entwodiksyon

This manual provides essential information for the safe assembly, operation, and maintenance of your Jetson Highlight 2-Wheel Light-Up Kick Scooter. Please read this manual thoroughly before use and retain it for future reference. This scooter is designed for recreational use by children aged 6 and up, with a maximum weight limit of 165 pounds.

2. Enfòmasyon sou Sekirite

Always prioritize safety when operating the scooter. Failure to follow safety guidelines can result in serious injury.

• Toujou mete yon kas ak ekipman sekirite apwopriye, tankou pwoteksyon jenou ak koud.
• Asire tout clampSistèm yo ak eleman fikse yo byen sere anvan chak woulib.
• Ride on smooth, paved surfaces away from traffic. Avoid uneven terrain, loose debris, and wet conditions.
• Do not ride at night or in low-light conditions without adequate visibility. The scooter's lights enhance visibility but are not a substitute for proper lighting.
• Maintain a safe distance from other riders and pedestrians.
• Adult supervision is recommended for younger riders.
• Do not attempt stunts or tricks that exceed your skill level.

3. Enstalasyon ak Asanble

The Jetson Highlight scooter requires partial assembly. Follow these steps to prepare your scooter for use.

3.1 Depliye Scooter a

To unfold the scooter, locate the folding mechanism near the base of the handlebar stem. Release the latch and carefully unfold the stem until it locks securely into place. Ensure the mechanism is fully engaged before riding.

Image: The folding mechanism, showing how the scooter can be made compact for storage or transport.

3.2 Ajisteman wotè gidon an

The handlebar height is adjustable to accommodate different rider heights. Loosen the clamp on the handlebar stem, adjust the handlebar to the desired height, ensuring the safety pin clicks into one of the adjustment holes. Then, securely tighten the clamp. The handlebar should be at hip level for optimal control.

Image: The adjustable handlebar stem, illustrating the mechanism for setting the correct height for the rider.

4. Itilizasyon Scooter a

Once assembled and adjusted, your Jetson Highlight scooter is ready for use.

4.1 Riding Technique

Place one foot firmly on the deck of the scooter. Use your other foot to push off the ground, generating momentum. Once moving, place both feet on the deck, one behind the other, and maintain balance. To turn, gently lean in the desired direction and steer the handlebars.

Imaj: Yon pwofesyonèl bò kotefile of the scooter, demonstrating its structure for riding.

4.2 Activating LED Lights

The Jetson Highlight scooter features motion-activated LED lights on the wheels and deck. No batteries are required. The lights will illuminate automatically when the scooter is in motion, providing enhanced visibility and a dynamic visual effect.

Image: The front wheel of the scooter, showing the integrated LED lights in action.

Image: The scooter's deck, highlighting the LED light strips that activate with motion.

4.3 Frenaj

To slow down or stop, apply pressure to the rear foot brake located above the rear wheel. Press down firmly with your heel. Practice braking at low speeds to become familiar with its response.

Image: The rear of the scooter, illustrating the position of the foot brake for stopping.

5. Antretyen

Antretyen regilye asire lonjevite ak operasyon an sekirite nan scooter ou a.

• Netwayaj: Siye scooter a ak piblisiteamp cloth after each use to remove dirt and debris. Avoid using harsh chemicals or abrasive cleaners.
• Enspeksyon wou: Periodically check the wheels for wear and tear. Ensure they spin freely and are free from cracks or damage.
• Tcheke Fastener: Regularly inspect all screws, bolts, and clamps to ensure they are tight. Tighten any loose fasteners.
• Depo: When not in use, store the scooter in a dry, cool place away from direct sunlight and moisture. The easy-folding mechanism allows for compact storage.
  

  Image: The scooter folded, ready for compact storage or transport.

NAN. Depanaj

Si ou rankontre pwoblèm ak scooter ou a, gade konsèy depanaj komen sa yo:

• Limyè ki pa limen: Ensure the scooter is in motion. The LED lights are motion-activated and do not require batteries. If the scooter is moving and lights are still off, check for any obstructions or damage to the wheel or deck light mechanisms.
• Handlebar Feels Loose: Check the handlebar clamp and ensure it is securely tightened. If the handlebar still feels loose, verify that the safety pin is fully engaged in one of the adjustment holes.
• Folding Mechanism Stuck: Ensure no debris is obstructing the folding mechanism. Apply gentle pressure while releasing the latch. Do not force the mechanism.

7. Espesifikasyon

8. Garanti

The Jetson Highlight 2-Wheel Light-Up Kick Scooter comes with a limited warranty. For detailed information regarding warranty coverage, terms, and conditions, please refer to the manufacturer's official websit la oubyen kontakte sèvis kliyan yo dirèkteman.

9. Sipò

For further assistance, technical support, or to purchase replacement parts, please visit the official Jetson websit la oubyen kontakte depatman sèvis kliyan yo. Ou kapab vizite tou Magazen Jetson sou Amazon pou enfòmasyon sou pwodwi ak akseswa.