Aerocool Cronus Mid Tower Case User Manual

1. Entwodiksyon

The Aerocool Cronus mid tower case is designed for high-performance PC builds, featuring a wide and sturdy chassis that supports E-ATX motherboards and offers three additional expansion slots for vertical graphics card installation. This case incorporates an X-shaped RGB LED front panel and a full tempered glass side panel, providing both aesthetic appeal and a clear view of internal components. It includes a 6-port PC fan hub for extensive ARGB lighting control and a GPU bracket to ensure graphics card stability. The pre-installed 140mm ARGB rear fan contributes to efficient cooling.

Figi 1.1: Devan ak bò view of the Aerocool Cronus Mid Tower Case, highlighting its RGB LED front panel and tempered glass side panel.

2. Karakteristik kle

• Konsepsyon dinamik: Features a tempered glass side panel, X-shaped RGB LED front panel, and a 14cm ARGB fan, enhancing the visual appeal of your PC build.
• GPU Bracket: An integrated GPU bracket provides stability for your graphics card, preventing sagging and ensuring reliable performance.
• Sistèm jesyon kab: Equipped with 6 cable grommets and 2 cable passthrough tubes for efficient and tidy cable routing, simplifying the build process and improving airflow.
• Maximized Performance: Engineered with a spacious interior and a sturdy chassis to accommodate various components and configurations, allowing for a customized and high-performance system.
• Convenient Connections: Includes a 6-port PC fan hub for connecting motherboards and accessories, offering extensive color combinations and customization options for ARGB lighting.

Figure 2.1: The Aerocool Cronus case integrated into a PC setup, demonstrating its aesthetic and functional presence.

3. Enstalasyon ak Enstalasyon

This section provides general guidelines for setting up your Aerocool Cronus Mid Tower Case. For detailed component-specific instructions, please refer to the manuals provided with your motherboard, power supply, and other hardware.

3.1. Prepare Ka a

1. Unpack the case carefully and remove all packaging materials.
2. Mete bwat la sou yon sifas ki plat e ki estab.
3. Remove the tempered glass side panel by unscrewing the thumb screws and gently pulling it away. Set it aside on a soft, non-abrasive surface to prevent scratches.
4. Remove the opposite side panel to access the cable management area.

3.2. Enstalasyon eleman

1. Enstalasyon Carte Mè: Install the necessary standoffs for your motherboard form factor (E-ATX, ATX, Micro-ATX, Mini-ITX). Carefully place the motherboard into the case, aligning it with the standoffs, and secure it with screws.
2. Enstalasyon ekipman pou pouvwa: Mount the power supply unit (PSU) in the designated bottom compartment. Secure it with screws from the rear of the case.
3. Enstalasyon Drive Depo: Install 2.5" SSDs and 3.5" HDDs into their respective drive bays. Utilize the tool-less mechanisms where available or secure with screws.
4. Enstalasyon Kat Grafik (GPU): Insert your graphics card into the appropriate PCIe slot on the motherboard. For vertical GPU installation, use the additional expansion slots and the included GPU bracket. Secure the GPU firmly.
5. Enstalasyon sistèm refwadisman: Install any additional fans or liquid cooling radiators as desired. The case supports various fan configurations and radiator sizes.

3.3. Jesyon kab

Utilize the cable grommets and passthrough tubes located behind the motherboard tray to route power cables and data cables neatly. This improves airflow and gives your build a cleaner appearance.

4. Operasyon Enstriksyon

4.1. Limen

After all components are installed and cables are connected, ensure the power supply switch is in the 'ON' position. Press the power button on the top I/O panel of the case to start your system.

4.2. Kontwòl ekleraj ARGB

The Aerocool Cronus case features an X-shaped RGB LED front panel and an ARGB rear fan, controlled via a 6-port PC fan hub. Lighting can be managed in two primary ways:

• Bouton kontwòl LED: Use the dedicated LED control button on the top I/O panel to cycle through various pre-set lighting effects and colors.
• Lojisyèl kat manman: Connect the ARGB hub to a compatible ARGB header on your motherboard (e.g., 5V 3-pin ARGB header). This allows you to synchronize lighting effects across all compatible components using your motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock Polychrome Sync). Refer to your motherboard manual for specific software instructions.

5. Antretyen ak Swen

Antretyen regilye ede asire pèfòmans optimal ak lonjevite bwat PC ou a.

• Netwayaj pousyè: Netwaye filtè pousyè yo (si genyen) ak konpozan entèn yo detanzantan avèk lè konprese. Asire w ke sistèm nan etenn epi debranche anvan ou netwaye li.
• Netwayaj eksteryè: Wipe the exterior surfaces, including the tempered glass panel, with a soft, damp cloth. Avoid abrasive cleaners or solvents that may damage the finish.
• Tcheke kab: Occasionally check internal cable connections to ensure they are secure and not obstructing airflow.

NAN. Depanaj

Seksyon sa a adrese pwoblèm komen ou ka rankontre ak bwat PC ou a.

7. Espesifikasyon

Below are the technical specifications for the Aerocool Cronus Mid Tower Case.

Figi 7.1: Dimansyon anlèview and motherboard compatibility of the Aerocool Cronus case.

8. Garanti ak sipò

For warranty information and technical support, please refer to the official AeroCool websit la oubyen kontakte depatman sèvis kliyan yo. Kenbe prèv acha ou pou reklamasyon garanti.

• Sipò sou entènèt: Vizite la AeroCool official websit for FAQs, drivers, and support resources.
• Sèvis Kliyan: Contact AeroCool customer support for assistance with product issues or warranty inquiries.