Antec NX410 ATX Mid-Tower Case User Manual

1. Pwodwi souview

The Antec NX410 is an ATX mid-tower case designed for PC enthusiasts and builders. It features a tempered glass side panel for full interior visibility and comes equipped with pre-installed ARGB fans for efficient cooling and aesthetic appeal. This manual provides detailed instructions for assembly, operation, and maintenance.

Image: Antec NX410 ATX Mid-Tower Case in white, showcasing its tempered glass side panel and vibrant ARGB fans.

Karakteristik kle:

• 3 ARGB Fans Included: Two 140mm ARGB fans are pre-installed in the front, and one 120mm ARGB fan is in the rear.
• Panèl bò an vè apeze: A tempered glass side panel offers a clear view of your internal components and RGB lighting.
• High Efficiency Cooling Design: The pre-installed 140mm ARGB front fans promote effective air convection for optimal cooling.
• Grid Front Panel Design: Yon staggered grid design on the front panel enhances aesthetics while maintaining heat dissipation.
• Sipò pou plak mèr: Compatible with ATX, Micro-ATX, and ITX motherboard form factors.

2. Enstalasyon ak Enstalasyon

2.1 Retire Panno Lateral yo

The tempered glass side panel is designed for easy access. It is secured with thumb screws and can be removed by lifting it off its hinges after opening. The opposite side panel is a solid metal panel, also secured with thumb screws.

Image: Antec NX410 case with the tempered glass side panel removed, showing the interior.

Image: Diagram illustrating the steps to remove the magnetic and removable tempered glass side panel. First, open the side panel, then lift it off.

Atansyon: The tempered glass is fragile. Handle with care. To remove the side glass panel, lay it flat before removing it.

2.2 Motherboard and Component Installation

The NX410 supports ATX, Micro-ATX, and ITX motherboards. Ensure your motherboard fits within the case dimensions of 390mm x 210mm x 485mm.

• Max CPU Cooler Wotè: 168 mm
• Longè GPU maksimòm: 335 mm
• Max PSU Longè: 165 mm

Image: Internal layout of the Antec NX410 case, highlighting maximum clearances for CPU cooler (168mm), GPU (335mm), and motherboard support (up to ATX).

2.3 Drive Bays

The case provides ample storage options:

• 3.5" HDD / 2.5" SSD (Convertible): 2/1 slots
• SSD 2.5 pous: 3 fant

Image: Rear interior view of the Antec NX410 case, indicating locations for SSDs, HDDs, and PSU.

2.4 Fan Installation and Support

The case comes with 3 ARGB fans pre-installed: two 140mm in the front and one 120mm in the rear. Additional fan support is available:

• Devan: Up to 3 x 120mm or 3 x 140mm fans (up to 360mm radiator)
• Top: Up to 2 x 120mm or 2 x 140mm fans (up to 280mm radiator)
• Dèyè: 1 x 120mm fan (up to 120mm radiator)

Image: Diagram illustrating the fan and radiator support configurations for the front, top, and rear of the Antec NX410 case.

Important Fan Connection: If fans work in tandem but haven't connected the main fan with the secondary fans, the secondary fans will not function. The fan kit works in sync with the motherboard for ARGB lighting.

Image: Diagram detailing the fan installation process, showing how major and secondary fans connect via 4-pin headers. A warning about secondary fans not functioning if the main fan is not connected is included.

For optimal cooling, ensure proper fan orientation for intake and exhaust airflow.

2.5 Jesyon kab

The case offers various tie-down points and cutouts behind the motherboard tray to facilitate clean cable routing, improving airflow and aesthetics.

Image: Rear interior view of the Antec NX410 case, showing pre-routed cables and space for cable management behind the motherboard tray.

3. Operasyon Enstriksyon

3.1 Pò Antre/Sòti Devan

The top panel features convenient I/O ports for easy access:

• Bouton pouvwa
• Bouton kontwòl LED: A single press changes the front panel's ARGB lighting effect.
• USB 3.0 x 1
• USB 2.0 x 2
• HD-AUDIO (Headphone and Microphone Jacks)

Imaj: Gwo plan view of the top I/O ports on the Antec NX410 case, including power, LED control, USB 3.0, USB 2.0, and HD-Audio jacks.

3.2 Kontwòl ekleraj ARGB

The pre-installed ARGB fans can be controlled via the LED control button on the top I/O panel. A single press cycles through various lighting effects. For motherboard synchronization, ensure the ARGB controller is properly connected to your motherboard's ARGB header.

Image: Close-up of the LED control button on the front panel of the Antec NX410 case, used to change ARGB lighting effects.

4. Antretyen

4.1 Netwayaj Filtè Pousyè

The Antec NX410 includes dust filters to help maintain a clean interior and optimal airflow. Regularly clean these filters to prevent dust buildup.

• Top Filtè Pousyè: The top panel features a removable magnetic dust filter. Gently lift and remove it for cleaning.
• Filtè Pousyè PSU: A removable dust filter is located at the bottom of the case, beneath the power supply unit. Slide it out for cleaning.

Use a soft brush or compressed air to remove dust from the filters. Washable filters can be rinsed with water and allowed to dry completely before reinstallation.

4.2 Tempered Glass Care

To clean the tempered glass side panel, use a soft, lint-free cloth and a non-abrasive glass cleaner. Avoid harsh chemicals or abrasive materials that could scratch the glass.

NAN. Depanaj

5.1 ARGB Lights Not Working

If your ARGB lights are not functioning:

• Check Fan Connections: Ensure all ARGB fans are correctly connected to the ARGB controller, and the controller is properly powered and connected to the motherboard (if using motherboard sync). Refer to the "Fan Installation and Support" section for connection details.
• Bouton kontwòl LED: Press the LED control button on the top I/O panel to cycle through lighting modes. If no lights appear, verify power connections.

5.2 Fan Noise

If you experience unusual fan noise:

• Tcheke pou obstak: Ensure no cables or other components are interfering with the fan blades.
• Mounting Vis: Verify that all fan mounting screws are tightened securely to prevent vibrations.
• Akimilasyon pousyè: Clean any dust buildup on fan blades or filters, as excessive dust can cause imbalance and noise.

6. Espesifikasyon

7. Garanti ak sipò

Pou enfòmasyon sou garanti a ak sipò teknik, tanpri al gade paj ofisyèl Antec la. website or contact Antec customer service directly. Keep your proof of purchase for warranty claims.

Ou ka vizite a Magazen Antec sou Amazon pou plis enfòmasyon sou pwodwi a ak resous sipò.