SIGMA SPORT Cadence Transmitter STS Model 2016 User Manual

1. Entwodiksyon

This manual provides detailed instructions for the installation, operation, and maintenance of your SIGMA SPORT Cadence Transmitter STS Model 2016. This wireless accessory is designed to measure pedal cadence and transmit data to compatible SIGMA bike computers.

The kit includes the cadence transmitter unit and a pedal magnet. The transmitter features a swivel function to ensure optimal alignment with the magnet for accurate measurement.

Image 1.1: The SIGMA SPORT Cadence Transmitter STS Model 2016, showing the main sensor unit and the separate pedal magnet.

2. Enstalasyon ak Enstalasyon

Proper installation is crucial for accurate cadence measurement. Follow these steps to install the cadence transmitter and magnet on your bicycle.

2.1 Eleman

• Cadence Transmitter Unit
• Pedal Magnet
• Mounting Hardware (e.g., zip ties or rubber bands, not always included but typically required)

2.2 Etap enstalasyon yo

1. Attach the Cadence Transmitter: Securely mount the cadence transmitter unit to the chainstay of your bicycle. Ensure it is positioned so that the 'SENSOR' side faces the crank arm. Use the provided mounting hardware to fasten it firmly, preventing movement during cycling.
2. Attach the Pedal Magnet: Affix the pedal magnet to the inside of your left crank arm. The magnet should be positioned to pass directly by the 'SENSOR' area of the transmitter unit with each pedal revolution.
3. Ajiste aliyman: The cadence transmitter features a swivel function. Adjust the angle of the transmitter so that its 'SENSOR' surface is parallel to the pedal magnet as it passes. The optimal distance between the magnet and the sensor is typically 2-5 mm. Rotate the crank arm slowly to verify consistent proximity.
4. Pair with Bike Computer: Refer to your compatible SIGMA bike computer's manual for specific instructions on pairing the cadence transmitter. Generally, this involves activating a search function on the computer while the transmitter is active (e.g., by rotating the pedals).

3. Operasyon Enstriksyon

Once installed and paired, the SIGMA SPORT Cadence Transmitter operates automatically when you begin cycling.

3.1 Aktivasyon otomatik

The transmitter is designed to activate automatically when it detects the pedal magnet passing by. There are no manual power buttons on the transmitter itself for daily use.

3.2 Transmisyon Done

The transmitter wirelessly sends cadence data to your compatible SIGMA bike computer using the STS (SIGMA Transmission System) protocol. Ensure your bike computer is set to receive cadence data.

3.3 Konpatibilite

This cadence transmitter is compatible with the following SIGMA bike computer models and all previous models with an STS pedal cadence sensor:

• BC 14.16 STS
• BC 14.16 STS CAD
• BC 16.16 STS
• BC 16.16 STS CAD
• BC 23.16 STS
• Sigma Topline Series 2009/2012

4. Antretyen

Regular maintenance ensures the longevity and optimal performance of your cadence transmitter.

4.1 Netwayaj

Wipe the transmitter and magnet with a damp twal pou retire pousyè tè ak debri. Evite itilize pwodui chimik piman bouk oswa pwodui netwayaj abrazif.

4.2 Ranplasman batri

The transmitter is powered by a lithium battery with an approximate life of 1.5 years. When the battery is low, your bike computer may indicate a weak signal or inconsistent readings. Refer to the specific instructions for opening the transmitter unit and replacing the battery (typically a coin cell battery).

4.3 Enpèmeyablite

The unit is rated IPX8, meaning it is protected against continuous immersion in water. However, avoid prolonged submersion and ensure the battery compartment is properly sealed after replacement to maintain its waterproof integrity.

NAN. Depanaj

If you experience issues with your cadence transmitter, consult the following common problems and solutions.

5.1 No Cadence Reading / Inconsistent Readings

• Tcheke aliyman: Ensure the pedal magnet passes within 2-5 mm of the transmitter's sensor area. Adjust the swivel function of the transmitter for optimal alignment.
• Tcheke batri: A low battery can cause intermittent or no readings. Replace the battery if it's old or if your bike computer indicates a low battery.
• Repare aparèy la: Try re-pairing the cadence transmitter with your bike computer. Refer to your bike computer's manual for pairing instructions.
• Entèferans: Ensure there are no strong magnetic fields or other wireless devices operating very close to the transmitter that could cause interference.
• Atachman fèm: Verify that both the transmitter and magnet are securely attached and not moving during cycling.

5.2 Transmitter Not Detected by Bike Computer

• Aktive Transmetè a: Rotate the pedals to activate the transmitter before attempting to pair.
• Pwoksimite: Ensure the bike computer is within range of the transmitter during the pairing process.
• Nivo batri: A completely depleted battery will prevent the transmitter from being detected.

6. Espesifikasyon

7. Garanti ak sipò

For information regarding warranty coverage and technical support, please refer to the official Sigma Sport website or contact your local Sigma Sport dealer. Keep your proof of purchase for any warranty claims.

Ou ka jwenn lòt plan pwoteksyon nan men machann ou an lè w ap achte a.