Entwodiksyon
The SONICAKE Sonic Wood is a versatile multi-effects pedal designed specifically for acoustic guitar players. It integrates four essential effects: a Preamp, Chorus, Delay, and Reverb, offering a comprehensive solution for stage performances and studio recordings. This manual provides detailed instructions for setup, operation, and maintenance of your Sonic Wood pedal.
Karakteristik kle
- One-Stop Gig Solution for Acoustic Instruments Players with Main Effects needed
- Analòg Preamp with 2-Band EQ recreates a Classic Acoustic Guitar Amplifier, provide a warm, natural sound
- High Quality Chorus, Delay, Reverb Effects for Different Playing Scenarios
- Tap Tempo and Tail On/Off function for Delicate Control
- XLR Output for directly connecting to PA, Mixer or Audio Interface.
Enstalasyon
Follow these steps to set up your SONICAKE Sonic Wood pedal:
- Koneksyon pouvwa: Connect the included 9V DC power adapter (center negative, 500mA) to the "DC 9V" input jack on the pedal. Ensure the power source is stable.
Image: The Sonic Wood pedal connected to its power adapter, showing the DC 9V input.
- Antre Enstriman: Connect your acoustic guitar to the "IN" 1/4-inch input jack on the right side of the pedal.
Image: An acoustic guitar cable plugged into the input jack of the Sonic Wood pedal.
- Output Connection (1/4-inch): Connect the "OUT" 1/4-inch jack to your acoustic amplifier or another pedal in your signal chain.
- XLR Output Connection: For direct connection to a PA system, mixer, or audio interface, use the "XLR OUT" balanced output on the left side of the pedal.
Imaj: Yon gwo plan view of the XLR output jack on the Sonic Wood pedal.
Enstriksyon Operasyon
The Sonic Wood pedal features four main effects, each with dedicated controls and footswitches.
1. Preamp Seksyon
The analog preamp recreates the warm, natural sound of a classic acoustic guitar amplifier. It includes a 2-band EQ for tone shaping.
- VOL: Adjusts the overall output volume of the preamp.
- BASS: Controls the low-frequency response.
- TREB: Kontwole repons wo-frekans lan.
Press the rightmost footswitch to engage or bypass the Preamp efè.
Image: Close-up of the Preamp section with Volume, Bass, and Treble knobs.
2. Chorus Section
The high-quality Chorus effect adds richness and depth to your acoustic tone.
- NIVO: Adjusts the mix level of the chorus effect.
- Pwofondè: Controls the intensity of the chorus modulation.
- TAS: Adjusts the speed of the chorus modulation.
Press the second footswitch from the right to engage or bypass the Chorus effect.
Tape Tempo: Hold down the Chorus footswitch for 2 seconds to enter Tap Tempo mode. Tap the footswitch multiple times to set the desired modulation rate. Hold again to exit.
Video: Demonstration of the SONICAKE Sonic Wood pedal's various effects, including the Chorus with Tap Tempo function.
3. Delay Section
The analog-voiced Delay effect provides organic repeats for various playing scenarios.
- MELANJ: Adjusts the mix level of the delayed signal.
- REPETE: Controls the number of repeats (feedback).
- TAN: Adjusts the delay time between repeats.
Press the second footswitch from the left to engage or bypass the Delay effect.
Tape Tempo: Hold down the Delay footswitch for 2 seconds to enter Tap Tempo mode. Tap the footswitch multiple times to set the desired delay time. Hold again to exit.
4. Reverb Section
The Reverb effect adds spaciousness and ambiance to your sound. It is designed to be easy to control yet powerful.
- MIX: Adjusts the mix level of the reverb effect.
Press the leftmost footswitch to engage or bypass the Reverb effect.
Tail On/Off: Hold down the Reverb footswitch for 2 seconds to toggle the Tail function. When Tail is ON, the reverb trails naturally even after bypassing the effect, creating a smooth transition.
Video: Detailed demonstration of the Sonic Wood pedal's features, including the Reverb effect and its Tail function.
Antretyen
To ensure the longevity and optimal performance of your SONICAKE Sonic Wood pedal, follow these maintenance guidelines:
- Keep the pedal clean by wiping it with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
- Store the pedal in a dry environment, away from extreme temperatures and humidity.
- Avoid dropping the pedal or subjecting it to strong impacts, as this can damage internal components.
- Always use the specified 9V DC (center negative) power adapter to prevent damage.
Depanaj
If you encounter issues with your Sonic Wood pedal, try the following solutions:
- Pa gen son:
- Ensure all cables (instrument, output, power) are securely connected.
- Verify the power adapter is correctly plugged in and providing power.
- Check if your guitar's volume is turned up and your amplifier is on and set correctly.
- Bypass the pedal to check if the issue is with the pedal or other equipment.
- Bri/ronfleman endezirab:
- Ensure you are using the correct power adapter (9V DC, center negative).
- Try a different power outlet or a power conditioner.
- Check for faulty cables and replace if necessary.
- Ensure proper grounding of your equipment.
- Effects Not Engaging:
- Press the footswitch firmly to ensure it engages.
- Check if the pedal is receiving power (LEDs should light up).
Espesifikasyon
| Atribi | Valè |
|---|---|
| Pwa atik | 1.06 liv (0.48 kilogram) |
| Dimansyon pwodwi | 10.31"L x 2.52"W x 1.77"H (2.8 x 15.85 x 2.24 pous) |
| Nimewo Modèl Atik | QCE-50(Sonic Wood) |
| Koulè | Nwa |
| Sous pouvwa | Fil elektrik |
| Voltage | 9 Volts |
| Fòma siyal | Analòg |
| Entèfas Materyèl | 1/4-pous Audio |
Garanti ak sipò
For warranty information and technical support, please refer to the official SONICAKE websit la oubyen kontakte sèvis kliyan yo dirèkteman. Plan pwoteksyon yo ka disponib tou pou yon pwoteksyon pwolonje.
- Plan Pwoteksyon 3 Zan: Disponib pou achte.
- Plan Pwoteksyon 4 Zan: Disponib pou achte.
- Pwoteksyon Konplè: Plan mansyèl ki kouvri acha sot pase yo ak acha nan lavni ki kalifye yo.
